4,041 research outputs found
Vision-Based navigation system for unmanned aerial vehicles
MenciĂłn Internacional en el tĂtulo de doctorThe main objective of this dissertation is to provide Unmanned Aerial Vehicles
(UAVs) with a robust navigation system; in order to allow the UAVs to perform
complex tasks autonomously and in real-time. The proposed algorithms deal with
solving the navigation problem for outdoor as well as indoor environments, mainly
based on visual information that is captured by monocular cameras. In addition,
this dissertation presents the advantages of using the visual sensors as the main
source of data, or complementing other sensors in providing useful information; in
order to improve the accuracy and the robustness of the sensing purposes.
The dissertation mainly covers several research topics based on computer vision
techniques: (I) Pose Estimation, to provide a solution for estimating the 6D pose of
the UAV. This algorithm is based on the combination of SIFT detector and FREAK
descriptor; which maintains the performance of the feature points matching and decreases
the computational time. Thereafter, the pose estimation problem is solved
based on the decomposition of the world-to-frame and frame-to-frame homographies.
(II) Obstacle Detection and Collision Avoidance, in which, the UAV is able to
sense and detect the frontal obstacles that are situated in its path. The detection
algorithm mimics the human behaviors for detecting the approaching obstacles; by
analyzing the size changes of the detected feature points, combined with the expansion
ratios of the convex hull constructed around the detected feature points
from consecutive frames. Then, by comparing the area ratio of the obstacle and the
position of the UAV, the method decides if the detected obstacle may cause a collision.
Finally, the algorithm extracts the collision-free zones around the obstacle,
and combining with the tracked waypoints, the UAV performs the avoidance maneuver.
(III) Navigation Guidance, which generates the waypoints to determine
the flight path based on environment and the situated obstacles. Then provide
a strategy to follow the path segments and in an efficient way and perform the
flight maneuver smoothly. (IV) Visual Servoing, to offer different control solutions (Fuzzy Logic Control (FLC) and PID), based on the obtained visual information; in
order to achieve the flight stability as well as to perform the correct maneuver; to
avoid the possible collisions and track the waypoints.
All the proposed algorithms have been verified with real flights in both indoor
and outdoor environments, taking into consideration the visual conditions; such as
illumination and textures. The obtained results have been validated against other
systems; such as VICON motion capture system, DGPS in the case of pose estimate
algorithm. In addition, the proposed algorithms have been compared with several
previous works in the state of the art, and are results proves the improvement in
the accuracy and the robustness of the proposed algorithms.
Finally, this dissertation concludes that the visual sensors have the advantages
of lightweight and low consumption and provide reliable information, which is
considered as a powerful tool in the navigation systems to increase the autonomy
of the UAVs for real-world applications.El objetivo principal de esta tesis es proporcionar Vehiculos Aereos no Tripulados
(UAVs) con un sistema de navegacion robusto, para permitir a los UAVs realizar
tareas complejas de forma autonoma y en tiempo real. Los algoritmos propuestos
tratan de resolver problemas de la navegacion tanto en ambientes interiores como
al aire libre basandose principalmente en la informacion visual captada por las camaras
monoculares. Ademas, esta tesis doctoral presenta la ventaja de usar sensores
visuales bien como fuente principal de datos o complementando a otros sensores
en el suministro de informacion util, con el fin de mejorar la precision y la
robustez de los procesos de deteccion.
La tesis cubre, principalmente, varios temas de investigacion basados en tecnicas
de vision por computador: (I) Estimacion de la Posicion y la Orientacion
(Pose), para proporcionar una solucion a la estimacion de la posicion y orientacion
en 6D del UAV. Este algoritmo se basa en la combinacion del detector SIFT y el
descriptor FREAK, que mantiene el desempeno del a funcion de puntos de coincidencia
y disminuye el tiempo computacional. De esta manera, se soluciona el
problema de la estimacion de la posicion basandose en la descomposicion de las
homografias mundo a imagen e imagen a imagen. (II) Deteccion obstaculos y elusion
colisiones, donde el UAV es capaz de percibir y detectar los obstaculos frontales
que se encuentran en su camino. El algoritmo de deteccion imita comportamientos
humanos para detectar los obstaculos que se acercan, mediante el analisis de la
magnitud del cambio de los puntos caracteristicos detectados de referencia, combinado
con los ratios de expansion de los contornos convexos construidos alrededor
de los puntos caracteristicos detectados en frames consecutivos. A continuacion,
comparando la proporcion del area del obstaculo y la posicion del UAV, el metodo
decide si el obstaculo detectado puede provocar una colision. Por ultimo, el algoritmo
extrae las zonas libres de colision alrededor del obstaculo y combinandolo
con los puntos de referencia, elUAV realiza la maniobra de evasion. (III) Guiado de navegacion, que genera los puntos de referencia para determinar la trayectoria de
vuelo basada en el entorno y en los obstaculos detectados que encuentra. Proporciona
una estrategia para seguir los segmentos del trazado de una manera eficiente
y realizar la maniobra de vuelo con suavidad. (IV) Guiado por Vision, para ofrecer
soluciones de control diferentes (Control de Logica Fuzzy (FLC) y PID), basados en
la informacion visual obtenida con el fin de lograr la estabilidad de vuelo, asi como
realizar la maniobra correcta para evitar posibles colisiones y seguir los puntos de
referencia.
Todos los algoritmos propuestos han sido verificados con vuelos reales en ambientes
exteriores e interiores, tomando en consideracion condiciones visuales como
la iluminacion y las texturas. Los resultados obtenidos han sido validados con otros
sistemas: como el sistema de captura de movimiento VICON y DGPS en el caso del
algoritmo de estimacion de la posicion y orientacion. Ademas, los algoritmos propuestos
han sido comparados con trabajos anteriores recogidos en el estado del arte
con resultados que demuestran una mejora de la precision y la robustez de los algoritmos
propuestos.
Esta tesis doctoral concluye que los sensores visuales tienen las ventajes de tener
un peso ligero y un bajo consumo y, proporcionar informacion fiable, lo cual lo
hace una poderosa herramienta en los sistemas de navegacion para aumentar la
autonomia de los UAVs en aplicaciones del mundo real.Programa Oficial de Doctorado en IngenierĂa ElĂ©ctrica, ElectrĂłnica y AutomáticaPresidente: Carlo Regazzoni.- Secretario: Fernando GarcĂa Fernández.- Vocal: Pascual Campoy Cerver
confined spaces industrial inspection with micro aerial vehicles and laser range finder localization
This work addresses the problem of semi-automatic inspection and navigation in confined environments. A system that overcomes many challenges at the state of the art is presented. It comprises a mu..
Path following and obstacle avoidance for an autonomous UAV using a depth camera
The main focus of this work is the development of a software architecture to autonomously navigate a flying vehicle in an indoor environment in presence of obstacles. The hardware platform used to test the developed algorithms is the AscTec Firefly equipped with a RGB-D camera (Microsoft Kinect): the sensor output is used to incrementally build a map of the environment and generate a collision-free path. Specifically, we introduce a novel approach to analytically compute the path in an efficient and effective manner. An initial path, given by the intersection of two 3D surfaces, is shaped around the obstacles by adding to either of the two surfaces a radial function at every obstacle location. The intersection between the deformed surfaces is guaranteed not to intersect obstacles, hence it is a safe path for the robot to follow. The entire computation runs on-board and the path is computed in real-time. In this article we present the developed algorithms, the software architecture as well as the results of our experiments, showing that the method can adapt in real time the robot's path in order to avoid several types of obstacles, while producing a map of the surroundings
Aerial Vehicles
This book contains 35 chapters written by experts in developing techniques for making aerial vehicles more intelligent, more reliable, more flexible in use, and safer in operation.It will also serve as an inspiration for further improvement of the design and application of aeral vehicles. The advanced techniques and research described here may also be applicable to other high-tech areas such as robotics, avionics, vetronics, and space
A 64mW DNN-based Visual Navigation Engine for Autonomous Nano-Drones
Fully-autonomous miniaturized robots (e.g., drones), with artificial
intelligence (AI) based visual navigation capabilities are extremely
challenging drivers of Internet-of-Things edge intelligence capabilities.
Visual navigation based on AI approaches, such as deep neural networks (DNNs)
are becoming pervasive for standard-size drones, but are considered out of
reach for nanodrones with size of a few cm. In this work, we
present the first (to the best of our knowledge) demonstration of a navigation
engine for autonomous nano-drones capable of closed-loop end-to-end DNN-based
visual navigation. To achieve this goal we developed a complete methodology for
parallel execution of complex DNNs directly on-bard of resource-constrained
milliwatt-scale nodes. Our system is based on GAP8, a novel parallel
ultra-low-power computing platform, and a 27 g commercial, open-source
CrazyFlie 2.0 nano-quadrotor. As part of our general methodology we discuss the
software mapping techniques that enable the state-of-the-art deep convolutional
neural network presented in [1] to be fully executed on-board within a strict 6
fps real-time constraint with no compromise in terms of flight results, while
all processing is done with only 64 mW on average. Our navigation engine is
flexible and can be used to span a wide performance range: at its peak
performance corner it achieves 18 fps while still consuming on average just
3.5% of the power envelope of the deployed nano-aircraft.Comment: 15 pages, 13 figures, 5 tables, 2 listings, accepted for publication
in the IEEE Internet of Things Journal (IEEE IOTJ
Survey of computer vision algorithms and applications for unmanned aerial vehicles
This paper presents a complete review of computer vision algorithms and vision-based intelligent applications, that are developed in the field of the Unmanned Aerial Vehicles (UAVs) in the latest decade. During this time, the evolution of relevant technologies for UAVs; such as component miniaturization, the increase of computational capabilities, and the evolution of computer vision techniques have allowed an important advance in the development of UAVs technologies and applications. Particularly, computer vision technologies integrated in UAVs allow to develop cutting-edge technologies to cope with aerial perception difficulties; such as visual navigation algorithms, obstacle detection and avoidance and aerial decision-making. All these expert technologies have developed a wide spectrum of application for UAVs, beyond the classic military and defense purposes. Unmanned Aerial Vehicles and Computer Vision are common topics in expert systems, so thanks to the recent advances in perception technologies, modern intelligent applications are developed to enhance autonomous UAV positioning, or automatic algorithms to avoid aerial collisions, among others. Then, the presented survey is based on artificial perception applications that represent important advances in the latest years in the expert system field related to the Unmanned Aerial Vehicles. In this paper, the most significant advances in this field are presented, able to solve fundamental technical limitations; such as visual odometry, obstacle detection, mapping and localization, et cetera. Besides, they have been analyzed based on their capabilities and potential utility. Moreover, the applications and UAVs are divided and categorized according to different criteria.This research is supported by the Spanish Government through the CICYT projects (TRA2015-63708-R and TRA2013-48314-C3-1-R)
Egospace Motion Planning Representations for Micro Air Vehicles
Navigation of micro air vehicles (MAVs) in unknown environments is a complex sensing and trajectory generation task, particularly at high velocities. In this work, we introduce an efficient sense-and-avoid pipeline that compactly represents range measurements from multiple sensors, trajectory generation, and motion planning in a 2.5–dimensional projective data structure called an egospace representation. Egospace coordinates generalize depth image obstacle representations and are a particularly convenient choice for configuration flat mobile robots, which are differentially flat in their configuration variables and include a number of commonly used MAV plant models. After characterizing egospace obstacle avoidance for robots with trivial dynamics and establishing limits on applicability and performance, we generalize to motion planning over full configuration flat dynamics using motion primitives expressed directly in egospace coordinates. In comparison to approaches based on world coordinates, egospace uses the natural sensor geometry to combine the benefits of a multi-resolution and multi-sensor representation architecture into a single simple and efficient layer.
We also present an experimental implementation, based on perception with stereo vision and an egocylinder obstacle representation, that demonstrates the specialization of our theoretical results to particular mission scenarios. The natural pixel parameterization of the egocylinder is used to quickly identify dynamically feasible maneuvers onto radial paths, expressed directly in egocylinder coordinates, that enable finely detailed planning at extreme ranges within milliseconds. We have implemented our obstacle avoidance pipeline with an Asctec Pelican quadcopter, and demonstrate the efficiency of our approach experimentally with a set of challenging field scenarios. The scalability potential of our system is discussed in terms of sensor horizon, actuation, and computational limitations and the speed limits that each imposes, and its generality to more challenging environments with multiple moving obstacles is developed as an immediate extension to the static framework
Real-time on-board obstacle avoidance for UAVs based on embedded stereo vision
In order to improve usability and safety, modern unmanned aerial vehicles
(UAVs) are equipped with sensors to monitor the environment, such as
laser-scanners and cameras. One important aspect in this monitoring process is
to detect obstacles in the flight path in order to avoid collisions. Since a
large number of consumer UAVs suffer from tight weight and power constraints,
our work focuses on obstacle avoidance based on a lightweight stereo camera
setup. We use disparity maps, which are computed from the camera images, to
locate obstacles and to automatically steer the UAV around them. For disparity
map computation we optimize the well-known semi-global matching (SGM) approach
for the deployment on an embedded FPGA. The disparity maps are then converted
into simpler representations, the so called U-/V-Maps, which are used for
obstacle detection. Obstacle avoidance is based on a reactive approach which
finds the shortest path around the obstacles as soon as they have a critical
distance to the UAV. One of the fundamental goals of our work was the reduction
of development costs by closing the gap between application development and
hardware optimization. Hence, we aimed at using high-level synthesis (HLS) for
porting our algorithms, which are written in C/C++, to the embedded FPGA. We
evaluated our implementation of the disparity estimation on the KITTI Stereo
2015 benchmark. The integrity of the overall realtime reactive obstacle
avoidance algorithm has been evaluated by using Hardware-in-the-Loop testing in
conjunction with two flight simulators.Comment: Accepted in the International Archives of the Photogrammetry, Remote
Sensing and Spatial Information Scienc
Fast, Autonomous Flight in GPS-Denied and Cluttered Environments
One of the most challenging tasks for a flying robot is to autonomously
navigate between target locations quickly and reliably while avoiding obstacles
in its path, and with little to no a-priori knowledge of the operating
environment. This challenge is addressed in the present paper. We describe the
system design and software architecture of our proposed solution, and showcase
how all the distinct components can be integrated to enable smooth robot
operation. We provide critical insight on hardware and software component
selection and development, and present results from extensive experimental
testing in real-world warehouse environments. Experimental testing reveals that
our proposed solution can deliver fast and robust aerial robot autonomous
navigation in cluttered, GPS-denied environments.Comment: Pre-peer reviewed version of the article accepted in Journal of Field
Robotic
- …