A Unified Architecture for Flexible Radio Power Management in Wireless Sensor Networks

A challenge for many wireless sensor networks is to remain operational for long periods of time on a very limited power supply. While many power management protocols have been proposed, a solution does not yet exist that allows them to be seamlessly integrated into the existing systems. In this paper we study the architectural support required to resolve this issue. We propose a framework that separates sleep scheduling from the basic MAC layer functionality and provide a set of unified interfaces between them. This framework enables different sleep scheduling policies to be easily implemented on top of multiple MAC layers. Such a flexibility allows applications to choose the best sleep scheduling policy based on their own particular needs. We demonstrate the practicality of our approach by implementing this framework on top of both the mica2 and telosb radio stacks in TinyOS 2.0. Our micro-benchmark results show that at the cost of a slight increase in code size, our framework significantly eases the development of new radio power management protocols across multiple WSN platform

Link Layer Support For Unified Radio Power Management in Wireless Sensor Networks, Master\u27s Thesis, May 2007

Radio power management is of paramount concern in wireless sensor networks that must achieve long lifetimes on scarce amounts of energy. While a multitude of power management protocols have been proposed in the past, the lack of system support for flexibly integrating them with a diverse set of applications and network platforms has made them difficult to use. Instead of proposing yet another power management protocol, this thesis focuses on providing link layer support towards realizing a Unified Power Management Architecture (UPMA) for flexible radio power management in wireless sensor networks. In contrast to the monolithic approaches adopted by existing power management solutions, we provide (1) a set of standard interfaces that allow different power management protocols existing at the link layer to be easily implemented on top of common MAC level functionality, (2) an architectural framework for enabling these protocols to be easily swapped in and out depending on the needs of the applications that require them, and (3) a mechanism for coordinating the existence of multiple applications, each of which may have different requirements for the same underlying power management protocol. We have implemented these features on the Mica2 and Telosb radio stacks in TinyOS-2.0. Microbenchmark results demonstrate that the separation of power management from MAC level functionality incurs a negligible decrease in performance when compared to existing monolithic implementations. Two case studies show that the power management requirements of multiple applications can be easily coordinated, sometimes even resulting in better power savings than any one of them can achieve individually

Link Layer Support for Unified Radio Power Management In Wireless Sensor Networks

Radio power management is of paramount concern in wireless sensor networks that must achieve long lifetimes on scarce amounts of energy. While a multitude of power management protocols have been proposed in the past, the lack of system support for flexibly integrating them with a diverse set of applications and network platforms has made them difficult to use. Instead of proposing yet another power management protocol, this paper focuses on providing link layer support towards realizing a Unified Power Management Architecture (UPMA) for flexible radio power management in wireless sensor networks. In contrast to the monolithic approaches adopted by existing power management solutions, we provide (1) a set of standard interfaces that allow different power management protocols existing at the link layer to be easily implemented on top of common MAC level functionality, (2) an architectural framework for enabling these protocols to be easily swapped in and out depending on the needs of the applications that require them, and (3) a mechanism for coordinating the existence of multiple applications, each of which may have different requirements for the same underlying power management protocol. We have implemented these features on the Mica2 and Telosb radio stacks in TinyOS-2.0. Microbenchmark results demonstrate that the separation of power management from MAC level functionality incurs a negligible decrease in performance when compared to existing monolithic implementations. Two case studies show that the power management requirements of multiple applications can be easily coordinated, sometimes even resulting in better power savings than any one of them can achieve individually

Unified radio and network control across heterogeneous hardware platforms

Experimentation is an important step in the investigation of techniques for handling spectrum scarcity or the development of new waveforms in future wireless networks. However, it is impractical and not cost effective to construct custom platforms for each future network scenario to be investigated. This problem is addressed by defining Unified Programming Interfaces that allow common access to several platforms for experimentation-based prototyping, research, and development purposes. The design of these interfaces is driven by a diverse set of scenarios that capture the functionality relevant to future network implementations while trying to keep them as generic as possible. Herein, the definition of this set of scenarios is presented as well as the architecture for supporting experimentation-based wireless research over multiple hardware platforms. The proposed architecture for experimentation incorporates both local and global unified interfaces to control any aspect of a wireless system while being completely agnostic to the actual technology incorporated. Control is feasible from the low-level features of individual radios to the entire network stack, including hierarchical control combinations. A testbed to enable the use of the above architecture is utilized that uses a backbone network in order to be able to extract measurements and observe the overall behaviour of the system under test without imposing further communication overhead to the actual experiment. Based on the aforementioned architecture, a system is proposed that is able to support the advancement of intelligent techniques for future networks through experimentation while decoupling promising algorithms and techniques from the capabilities of a specific hardware platform

Recent advances in industrial wireless sensor networks towards efficient management in IoT

With the accelerated development of Internet-of- Things (IoT), wireless sensor networks (WSN) are gaining importance in the continued advancement of information and communication technologies, and have been connected and integrated with Internet in vast industrial applications. However, given the fact that most wireless sensor devices are resource constrained and operate on batteries, the communication overhead and power consumption are therefore important issues for wireless sensor networks design. In order to efficiently manage these wireless sensor devices in a unified manner, the industrial authorities should be able to provide a network infrastructure supporting various WSN applications and services that facilitate the management of sensor-equipped real-world entities. This paper presents an overview of industrial ecosystem, technical architecture, industrial device management standards and our latest research activity in developing a WSN management system. The key approach to enable efficient and reliable management of WSN within such an infrastructure is a cross layer design of lightweight and cloud-based RESTful web service

Energy Harvesting and Management for Wireless Autonomous Sensors

Wireless autonomous sensors that harvest ambient energy are attractive solutions, due to their convenience and economic benefits. A number of wireless autonomous sensor platforms which consume less than 100?W under duty-cycled operation are available. Energy harvesting technology (including photovoltaics, vibration harvesters, and thermoelectrics) can be used to power autonomous sensors. A developed system is presented that uses a photovoltaic module to efficiently charge a supercapacitor, which in turn provides energy to a microcontroller-based autonomous sensing platform. The embedded software on the node is structured around a framework in which equal precedent is given to each aspect of the sensor node through the inclusion of distinct software stacks for energy management and sensor processing. This promotes structured and modular design, allowing for efficient code reuse and encourages the standardisation of interchangeable protocols

An Energy Driven Architecture for Wireless Sensor Networks

Most wireless sensor networks operate with very limited energy sources-their batteries, and hence their usefulness in real life applications is severely constrained. The challenging issues are how to optimize the use of their energy or to harvest their own energy in order to lengthen their lives for wider classes of application. Tackling these important issues requires a robust architecture that takes into account the energy consumption level of functional constituents and their interdependency. Without such architecture, it would be difficult to formulate and optimize the overall energy consumption of a wireless sensor network. Unlike most current researches that focus on a single energy constituent of WSNs independent from and regardless of other constituents, this paper presents an Energy Driven Architecture (EDA) as a new architecture and indicates a novel approach for minimising the total energy consumption of a WS