A two-queue model for optimising the value of information in energy-harvesting sensor networks

A

Optimal data collection in wireless sensor networks with correlated energy harvesting

We study the optimal data collection rate in a hybrid wireless sensor network where sensor data is collected by mobile sinks. In such networks, there is a trade-off between the cost of data collection and the timeliness of the data. We further assume that the sensor node under study harvests its energy from its environment. Such energy harvesting sensors ideally operate energy neutral, meaning that they can harvest the necessary energy to sense and transmit data, and have on-board rechargeable batteries to level out energy harvesting fluctuations. Even with batteries, fluctuations in energy harvesting can considerably affect performance, as it is not at all unlikely that a sensor node runs out of energy, and is neither able to sense nor to transmit data. The energy harvesting process also influences the cost vs. timeliness trade-off as additional data collection requires additional energy as well. To study this trade-off, we propose an analytic model for the value of the information that a sensor node brings to decision-making. We account for the timeliness of the data by discounting the value of the information at the sensor over time, we adopt the energy chunk approach (i.e. discretise the energy level) to track energy harvesting and expenditure over time, and introduce correlation in the energy harvesting process to study its influence on the optimal collection rate

Performance Modelling and Optimisation of Multi-hop Networks

A major challenge in the design of large-scale networks is to predict and optimise the total time and energy consumption required to deliver a packet from a source node to a destination node. Examples of such complex networks include wireless ad hoc and sensor networks which need to deal with the effects of node mobility, routing inaccuracies, higher packet loss rates, limited or time-varying effective bandwidth, energy constraints, and the computational limitations of the nodes. They also include more reliable communication environments, such as wired networks, that are susceptible to random failures, security threats and malicious behaviours which compromise their quality of service (QoS) guarantees. In such networks, packets traverse a number of hops that cannot be determined in advance and encounter non-homogeneous network conditions that have been largely ignored in the literature. This thesis examines analytical properties of packet travel in large networks and investigates the implications of some packet coding techniques on both QoS and resource utilisation. Specifically, we use a mixed jump and diffusion model to represent packet traversal through large networks. The model accounts for network non-homogeneity regarding routing and the loss rate that a packet experiences as it passes successive segments of a source to destination route. A mixed analytical-numerical method is developed to compute the average packet travel time and the energy it consumes. The model is able to capture the effects of increased loss rate in areas remote from the source and destination, variable rate of advancement towards destination over the route, as well as of defending against malicious packets within a certain distance from the destination. We then consider sending multiple coded packets that follow independent paths to the destination node so as to mitigate the effects of losses and routing inaccuracies. We study a homogeneous medium and obtain the time-dependent properties of the packet’s travel process, allowing us to compare the merits and limitations of coding, both in terms of delivery times and energy efficiency. Finally, we propose models that can assist in the analysis and optimisation of the performance of inter-flow network coding (NC). We analyse two queueing models for a router that carries out NC, in addition to its standard packet routing function. The approach is extended to the study of multiple hops, which leads to an optimisation problem that characterises the optimal time that packets should be held back in a router, waiting for coding opportunities to arise, so that the total packet end-to-end delay is minimised

Optimising lower layers of the protocol stack to improve communication performance in a wireless temperature sensor network

The function of wireless sensor networks is to monitor events or gather information and report the information to a sink node, a central location or a base station. It is a requirement that the information is transmitted through the network efficiently. Wireless communication is the main activity that consumes energy in wireless sensor networks through idle listening, overhearing, interference and collision. It becomes essential to limit energy usage while maintaining communication between the sensor nodes and the sink node as the nodes die after the battery has been exhausted. Thus, conserving energy in a wireless sensor network is of utmost importance. Numerous methods to decrease energy expenditure and extend the lifetime of the network have been proposed. Researchers have devised methods to efficiently utilise the limited energy available for wireless sensor networks by optimising the design parameters and protocols. Cross-layer optimisation is an approach that has been employed to improve wireless communication. The essence of cross-layer scheme is to optimise the exchange and control of data between two or more layers to improve efficiency. The number of transmissions is therefore a vital element in evaluating overall energy usage. In this dissertation, a Markov Chain model was employed to analyse the tuning of two layers of the protocol stack, namely the Physical Layer (PHY) and Media Access Control layer (MAC), to find possible energy gains. The study was conducted utilising the IEEE 802.11 channel, SensorMAC (SMAC) and Slotted-Aloha (S-Aloha) medium access protocols in a star topology Wireless Temperature Sensor Network (WTSN). The research explored the prospective energy gains that could be realised through optimizing the Forward Error Correction (FEC) rate. Different Reed Solomon codes were analysed to explore the effect of protocol tuning on energy efficiency, namely transmission power, modulation method, and channel access. The case where no FEC code was used and analysed as the control condition. A MATLAB simulation model was used to identify the statistics of collisions, overall packets transmitted, as well as the total number of slots used during the transmission phase. The bit error probability results computed analytically were utilised in the simulation model to measure the probability of successful transmitting data in the physical layer. The analytical values and the simulation results were compared to corroborate the correctness of the models. The results indicate that energy gains can be accomplished by the suggested layer tuning approach.Electrical and Mining EngineeringM. Tech. (Electrical Engineering

Performance optimization with energy packets

We investigate how the flow of energy and the flow of jobs in a service system can be used to minimize the average response time to jobs that arrive according to random arrival processes at the servers. An interconnected system of workstations and energy storage units that are fed with randomly arriving harvested energy is analyzed by means of the Energy Packet Network (EPN) model. The system state is discretized, and uses discrete units to represent the backlog of jobs at the workstations, and the amount of energy that is available at the energy storage units. An Energy Packet (EP) which is the unit of energy, can be used to process one or more jobs at a workstation, and an EP can also be expended to move a job from one workstation to another one. The system is modeled as a probabilistic network that has a product-form solution for the equilibrium probability distribution of system state. The EPN model is used to solve two problems related to using the flow of energy and jobs in a multi-server system, so as to minimize the average response time experienced by the jobs that arrive at the system

Radio frequency energy harvesting for autonomous systems

A thesis submitted to the University of Bedfordshire in partial fulfilment of the requirements for the degree of Doctor of PhilosophyRadio Frequency Energy Harvesting (RFEH) is a technology which enables wireless power delivery to multiple devices from a single energy source. The main components of this technology are the antenna and the rectifying circuitry that converts the RF signal into DC power. The devices which are using Radio Frequency (RF) power may be integrated into Wireless Sensor Networks (WSN), Radio Frequency Identification (RFID), biomedical implants, Internet of Things (IoT), Unmanned Aerial Vehicles (UAVs), smart meters, telemetry systems and may even be used to charge mobile phones. Aside from autonomous systems such as WSNs and RFID, the multi-billion portable electronics market – from GSM phones to MP3 players – would be an attractive application for RF energy harvesting if the power requirements are met. To investigate the potential for ambient RFEH, several RF site surveys were conducted around London. Using the results from these surveys, various harvesters were designed and tested for different frequency bands from the RF sources with the highest power density within the Medium Wave (MW), ultra- and super-high (UHF and SHF) frequency spectrum. Prototypes were fabricated and tested for each of the bands and proved that a large urban area around Brookmans park radio centre is suitable location for harvesting ambient RF energy. Although the RFEH offers very good efficiency performance, if a single antenna is considered, the maximum power delivered is generally not enough to power all the elements of an autonomous system. In this thesis we present techniques for optimising the power efficiency of the RFEH device under demanding conditions such as ultra-low power densities, arbitrary polarisation and diverse load impedances. Subsequently, an energy harvesting ferrite rod rectenna is designed to power up a wireless sensor and its transmitter, generating dedicated Medium Wave (MW) signals in an indoor environment. Harvested power management, application scenarios and practical results are also presented

Managing the harvested energy in wireless sensor networks : a priority Geo/Geo/1/k approach with threshold

Wireless sensor networks face many challenges, the major one being energy. Batteries are the main source of energy for the sensor nodes. When the battery is depleted, it must either be charged or replaced. This may be expensive or impossible to do. Energy harvesting has been proposed as an alternative. The energy is harvested and then stored in a battery. However, even if the battery is not in use, it experiences current leakages. We study the performance of a single node, which has data packets and energy tokens. The energy that is harvested is kept in reserve as energy tokens in an energy buffer and utilised by the data packets for transmission. This paper investigates the impact of imposing a threshold on the token buffer of the system. The problem considered is managing the energy buffer by taking into account storage of energy, usage by the data packets and energy leakage. The proposed model considers the transmission of high and low priority data packets. To ensure that there are tokens available in the system to transmit the high-priority data packets in case the arrival rate of the low-priority data packets is too high at the expense of high priority data packets, a threshold is imposed on the token buffer. To illustrate our approach, a Geo/Geo/1/k system is modelled and finite Markov chain model tools are used to analyse it. Numerical examples, which show how performance measures such as the mean number of data packets and tokens in the system are affected by energy harvesting, leakage and threshold, are presented. From the results obtained we show that the model can be utilised in the analysis and control of a wireless sensor network, as it captures the usage and leakage of energy. A trade-off between threshold and rate of leakage exists.SENTECH and the South African Research Chairs Initiative (SARChI) in Advanced Sensor Networks (ASN).http://www.elsevier.com/locate/egyrhj2022Electrical, Electronic and Computer Engineerin