Machine Learning in Wireless Sensor Networks: Algorithms, Strategies, and Applications

Wireless sensor networks monitor dynamic environments that change rapidly over time. This dynamic behavior is either caused by external factors or initiated by the system designers themselves. To adapt to such conditions, sensor networks often adopt machine learning techniques to eliminate the need for unnecessary redesign. Machine learning also inspires many practical solutions that maximize resource utilization and prolong the lifespan of the network. In this paper, we present an extensive literature review over the period 2002-2013 of machine learning methods that were used to address common issues in wireless sensor networks (WSNs). The advantages and disadvantages of each proposed algorithm are evaluated against the corresponding problem. We also provide a comparative guide to aid WSN designers in developing suitable machine learning solutions for their specific application challenges.Comment: Accepted for publication in IEEE Communications Surveys and Tutorial

Effect of steel fibre volume fraction on thermal performance of lightweight foamed mortar (LFM) at ambient temperature

Lightweight foamed mortar (LFM) has grow into utmost commercial building material in the construction industry for non-structural and semi-structural applications owing to its reduced self-weight, flowability, stability and excellent thermal insulation properties. Hence, this study was conducted with the aims to develop an alternative for conventional concrete bricks and blocks for non-structural and semi-structural applications of masonry. Lightweight foamed mortar (LFM) is either a cement paste or mortar, relegated as lightweight concrete, in which suitable foaming agent entraps the air-voids in mortar. It therefore has a wide range of applications such as material for wall blocks or panels, floor & roof screeds, trench reinstatement, road foundations and voids filling. This research focuses on experimental investigation of thermal properties of LFM with inclusion of relatively low volume fraction (0.2% and 0.4%) of steel fibre at ambient temperature. There are three parameters will be scrutinized such as thermal conductivity, thermal diffusivity as well as the specific heat capacity. There are two densities of 600kg/m3 and 1200kg/m3 had been cast and tested. The mix design proportion of LFM used for cement, aggregate and water ratio was 1: 1.5:0.45. The experimental results had indicated that the thermal conductivity, thermal diffusivity and specific heat value slightly higher than control mix due to the addition of steel fibres. For instance, thermal conductivity, diffusivity and specific heat of 600 kg/m3 density control mix were 0.212W/mK, 0.477mm2/s and 545 J/kg◦C respectively. When 0.2% volume fraction of steel fiber was added in the mix of 600 kg/m3 density, the value of thermal conductivity, diffusivity and specific heat were increased to 0.235W/mK, 0.583mm2/s and 578 J/kg◦C correspondingly. This is due to the characteristic of the steel fibre application in which steel fibre is good as heat conductor and excellent in absorbing heat. Therefore there is a potential of utilizing steel fiber in cement based material like LFM for components that needs excellent heat absorption capacity

QoS multicast routing protocol oriented to cognitive network using competitive coevolutionary algorithm

The human intervention in the network management and maintenance should be reduced to alleviate the ever-increasing spatial and temporal complexity. By mimicking the cognitive behaviors of human being, the cognitive network improves the scalability, self-adaptation, self-organization, and self-protection in the network. To implement the cognitive network, the cognitive behaviors for the network nodes need to be carefully designed. Quality of service (QoS) multicast is an important network problem. Therefore, it is appealing to develop an effective QoS multicast routing protocol oriented to cognitive network. In this paper, we design the cognitive behaviors summarized in the cognitive science for the network nodes. Based on the cognitive behaviors, we propose a QoS multicast routing protocol oriented to cognitive network, named as CogMRT. It is a distributed protocol where each node only maintains local information. The routing search is in a hop by hop way. Inspired by the small-world phenomenon, the cognitive behaviors help to accumulate the experiential route information. Since the QoS multicast routing is a typical combinatorial optimization problem and it is proved to be NP-Complete, we have applied the competitive coevolutionary algorithm (CCA) for the multicast tree construction. The CCA adopts novel encoding method and genetic operations which leverage the characteristics of the problem. We implement and evaluate CogMRT and other two promising alternative protocols in NS2 platform. The results show that CogMRT has remarkable advantages over the counterpart traditional protocols by exploiting the cognitive favors

Research routing and MAC based on LEACH and S-MAC for energy efficiency and QoS in wireless sensor network

The wireless sensor is a micro-embedded device with weak data processing capability and small storage space. These nodes need to complete complex jobs, including data monitoring, acquisition and conversion, and data processing. Energy efficiency should be considered as one of the important aspects of the Wireless Sensor Network (WSN) throughout architecture and protocol design. At the same time, supporting Quality of Service (QoS) in WSNs is a research field, because the time-sensitive and important information is expected for the transmitting to to the sink node immediately. The thesis is supported by the projects entitled “The information and control system for preventing forest fires”, and “The Erhai information management system”, funded by the Chinese Government. Energy consumption and QoS are two main objectives of the projects. The thesis discusses the two aspects in route and Media Access Control (MAC). For energy efficiency, the research is based on Low Energy Adaptive Clustering Hierarchy (LEACH) protocol. LEACH is a benchmark clustering routing protocol which imposes upon cluster heads to complete a lot of aggregation and relay of messages to the base-station. However, there are limitations in LEACH. LEACH does not suit a wide area in clustering strategy and multi-hop routing. Moreover, routing protocols only focus on one factor, combining the clustering strategy and multi-hop routing mechanism were not considered in routing protocol for performance of network. QoS is supported by the MAC and routing protocol. Sensor MAC(S-MAC) makes the use of the periodically monitoring / sleeping mechanism, as well as collision and crosstalk avoidance mechanism. The mechanism reduces energy costs. Meanwhile, it supports good scalability and avoids the collision. However, the protocols do not take the differentiated services. For supporting QoS,A new route protocol needs to be designed and realized on embed platforms, which has WIFI mode and a Linux operation system to apply on the actual system. This research project was conducted as following the steps: A new protocol called RBLEACH is proposed to solve cluster on a widely scale based on LEACH. The area is divided into a few areas, where LEACH is improved to alter the selecting function in each area. RBLEACH creates routes selected by using a new algorithm to optimize the performance of the network. A new clustering method that has been developed to use several factors is PS-ACO-LEACH. The factors include the residual energy of the cluster head and Euclidean distances between cluster members and a cluster head. It can optimally solve fitness function and maintain a load balance in between the cluster head nodes, a cluster head and the base station. Based on the “Ant Colony” algorithm and transition of probability, a new routing protocol was created by “Pheromone” to find the optimal path of cluster heads to the base station. This protocol can reduce energy consumption of cluster heads and unbalanced energy consumption. Simulations prove that the improved protocol can enhance the performance of the network, including lifetime and energy conservation. Additionally, Multi Index Adaptive Routing Algorithm (MIA-QR) was designed based on network delay, packet loss rate and signal strength for QoS. The protocol is achieved by VC on an embedded Linux system. The MIA-QR is tested and verified by experiment and the protocol is to support QoS. Finally, an improved protocol (SMAC -SD) for wireless sensor networks is proposed, in order to solve the problem of S-MAC protocol that consider either service differentiation or ensure quality of service. According to service differentiation, SMAC-SD adopts an access mechanism based on different priorities including the adjustment of priority mechanisms of channel access probability, channel multi-request mechanisms and the configuring of waiting queues with different priorities and RTS backoff for different service, which makes the important service receive high channel access probability, ensuring the transmission quality of the important service. The simulation results show that the improved protocol is able to gain amount of important service and shortens the delay at the same time. Meanwhile, it improves the performance of the network effectivel

A Survey on Energy-Efficient Strategies in Static Wireless Sensor Networks

A comprehensive analysis on the energy-efficient strategy in static Wireless Sensor Networks (WSNs) that are not equipped with any energy harvesting modules is conducted in this article. First, a novel generic mathematical definition of Energy Efficiency (EE) is proposed, which takes the acquisition rate of valid data, the total energy consumption, and the network lifetime of WSNs into consideration simultaneously. To the best of our knowledge, this is the first time that the EE of WSNs is mathematically defined. The energy consumption characteristics of each individual sensor node and the whole network are expounded at length. Accordingly, the concepts concerning EE, namely the Energy-Efficient Means, the Energy-Efficient Tier, and the Energy-Efficient Perspective, are proposed. Subsequently, the relevant energy-efficient strategies proposed from 2002 to 2019 are tracked and reviewed. Specifically, they respectively are classified into five categories: the Energy-Efficient Media Access Control protocol, the Mobile Node Assistance Scheme, the Energy-Efficient Clustering Scheme, the Energy-Efficient Routing Scheme, and the Compressive Sensing--based Scheme. A detailed elaboration on both of the basic principle and the evolution of them is made. Finally, further analysis on the categories is made and the related conclusion is drawn. To be specific, the interdependence among them, the relationships between each of them, and the Energy-Efficient Means, the Energy-Efficient Tier, and the Energy-Efficient Perspective are analyzed in detail. In addition, the specific applicable scenarios for each of them and the relevant statistical analysis are detailed. The proportion and the number of citations for each category are illustrated by the statistical chart. In addition, the existing opportunities and challenges facing WSNs in the context of the new computing paradigm and the feasible direction concerning EE in the future are pointed out

Distributed field estimation in wireless sensor networks

This work takes into account the problem of distributed estimation of a physical field of interest through a wireless sesnor networks

Distributed field estimation in wireless sensor networks

This work takes into account the problem of distributed estimation of a physical field of interest through a wireless sesnor networks