716 research outputs found
Recommended from our members
Acoustic emission and vibration for tool wear monitoring in single-point
This paper proposes an implementation of calibrated acoustic emission (AE) and vibration techniques to monitor progressive stages of flank wear on carbide tool tips. Three cutting conditions were used on workpiece material, type EN24T, in turning operation. The root-mean-square value of AE (AErms) and the coherence function between the acceleration signals at the tool tip in the tangential and feed directions was studied. Three features were identified to be sensitive to tool wear: AErms, coherence function in the frequency ranges 2.5-5.5 kHz and 18-25 kHz. Belief network based on Bayes’ rule was used to integrate information in order to recognise the occurrence of worn tool. The three features obtained from the three cutting conditions and machine time were used to train the network. The set of feature vectors for worn tools was divided into two equal sub-sets: one to train the network and the other to test it. The AErms in term of AE pressure equivalent was used to train and test the net work to validate the calibrated acoustic. The overall success rate of the network in detecting a worn tool was high with low error rate
Recommended from our members
The design of an effective sensor fusion model for condition monitoring systems of turning processes
High energy price and the increasing requirements of quality and low cost of products have created an urgent need to implement new technologies in current automated manufacturing environments. Condition monitoring systems of manufacturing processes have been recognised in recent years as one of the essential technologies that provide the competitive advantage in many manufacturing environments. This research aims to develop an effective sensor fusion model for turning processes for the detection of tool wear. Multi-sensors combined with a novelty detection algorithm and Learning Vector Quantisation (LVQ) neural networks are used in this research to detect tool wear and provide diagnostic and prognostic information. A novel approach, termed ASPST, (Automated Sensor and Signal Processing Selection System for Turning) is used to select the most appropriate sensors and signal processing methods. The aim is to reduce the number of sensors needed in the overall system and reduce the cost. The ASPST approach is based on simplifying complex sensory signals into a group of Sensory Characteristic Features (SCFs) and evaluating the sensitivity of these SCFs in detecting tool wear. A wide range of sensory signals (cutting forces, strain, acceleration, acoustic emission and sound) and signal processing methods are also implemented to verify the capability of the approach. A cost reduction method is also implemented based on eliminating the least utilised sensor in an attempt to reduce the overall cost of the system without sacrificing the capability of the condition monitoring system. The experimental results prove that the suggested approach provides a responsive and effective solution in monitoring tool wear in turning with reduced time and cost
Intrusion Detection for Cyber-Physical Attacks in Cyber-Manufacturing System
In the vision of Cyber-Manufacturing System (CMS) , the physical components such as products, machines, and tools are connected, identifiable and can communicate via the industrial network and the Internet. This integration of connectivity enables manufacturing systems access to computational resources, such as cloud computing, digital twin, and blockchain. The connected manufacturing systems are expected to be more efficient, sustainable and cost-effective.
However, the extensive connectivity also increases the vulnerability of physical components. The attack surface of a connected manufacturing environment is greatly enlarged. Machines, products and tools could be targeted by cyber-physical attacks via the network. Among many emerging security concerns, this research focuses on the intrusion detection of cyber-physical attacks.
The Intrusion Detection System (IDS) is used to monitor cyber-attacks in the computer security domain. For cyber-physical attacks, however, there is limited work. Currently, the IDS cannot effectively address cyber-physical attacks in manufacturing system: (i) the IDS takes time to reveal true alarms, sometimes over months; (ii) manufacturing production life-cycle is shorter than the detection period, which can cause physical consequences such as defective products and equipment damage; (iii) the increasing complexity of network will also make the detection period even longer. This gap leaves the cyber-physical attacks in manufacturing to cause issues like over-wearing, breakage, defects or any other changes that the original design didn’t intend.
A review on the history of cyber-physical attacks, and available detection methods are presented. The detection methods are reviewed in terms of intrusion detection algorithms, and alert correlation methods. The attacks are further broken down into a taxonomy covering four dimensions with over thirty attack scenarios to comprehensively study and simulate cyber-physical attacks.
A new intrusion detection and correlation method was proposed to address the cyber-physical attacks in CMS. The detection method incorporates IDS software in cyber domain and machine learning analysis in physical domain. The correlation relies on a new similarity-based cyber-physical alert correlation method. Four experimental case studies were used to validate the proposed method. Each case study focused on different aspects of correlation method performance. The experiments were conducted on a security-oriented manufacturing testbed established for this research at Syracuse University.
The results showed the proposed intrusion detection and alert correlation method can effectively disclose unknown attack, known attack and attack interference that causes false alarms. In case study one, the alarm reduction rate reached 99.1%, with improvement of detection accuracy from 49.6% to 100%. The case studies also proved the proposed method can mitigate false alarms, detect attacks on multiple machines, and attacks from the supply chain.
This work contributes to the security domain in cyber-physical manufacturing systems, with the focus on intrusion detection. The dataset collected during the experiments has been shared with the research community. The alert correlation methodology also contributes to cyber-physical systems, such as smart grid and connected vehicles, which requires enhanced security protection in today’s connected world
A Field Programmable Gate Array-Based Reconfigurable Smart-Sensor Network for Wireless Monitoring of New Generation Computer Numerically Controlled Machines
Computer numerically controlled (CNC) machines have evolved to adapt to increasing technological and industrial requirements. To cover these needs, new generation machines have to perform monitoring strategies by incorporating multiple sensors. Since in most of applications the online Processing of the variables is essential, the use of smart sensors is necessary. The contribution of this work is the development of a wireless network platform of reconfigurable smart sensors for CNC machine applications complying with the measurement requirements of new generation CNC machines. Four different smart sensors are put under test in the network and their corresponding signal processing techniques are implemented in a Field Programmable Gate Array (FPGA)-based sensor node
Smart Computing and Sensing Technologies for Animal Welfare: A Systematic Review
Animals play a profoundly important and intricate role in our lives today.
Dogs have been human companions for thousands of years, but they now work
closely with us to assist the disabled, and in combat and search and rescue
situations. Farm animals are a critical part of the global food supply chain,
and there is increasing consumer interest in organically fed and humanely
raised livestock, and how it impacts our health and environmental footprint.
Wild animals are threatened with extinction by human induced factors, and
shrinking and compromised habitat. This review sets the goal to systematically
survey the existing literature in smart computing and sensing technologies for
domestic, farm and wild animal welfare. We use the notion of \emph{animal
welfare} in broad terms, to review the technologies for assessing whether
animals are healthy, free of pain and suffering, and also positively stimulated
in their environment. Also the notion of \emph{smart computing and sensing} is
used in broad terms, to refer to computing and sensing systems that are not
isolated but interconnected with communication networks, and capable of remote
data collection, processing, exchange and analysis. We review smart
technologies for domestic animals, indoor and outdoor animal farming, as well
as animals in the wild and zoos. The findings of this review are expected to
motivate future research and contribute to data, information and communication
management as well as policy for animal welfare
- …