Modeling and Design Techniques for 3-D ICs under Process, Voltage, and Temperature Variations

Three-dimensional (3-D) integration is a promising solution to further enhance the density and performance of modern integrated circuits (ICs). In 3-D ICs, multiple dies (tiers or planes) are vertically stacked. These dies can be designed and fabricated separately. In addition, these dies can be fabricated in different technologies. The effect of different sources of variations on 3-D circuits, consequently, differ from 2-D ICs. As technology scales, these variations significantly affect the performance of circuits. Therefore, it is increasingly important to accurately and efficiently model different sources of variations in 3-D ICs. The process, voltage, and temperature variations in 3-D ICs are investigated in this dissertation. Related modeling and design techniques are proposed to design a robust 3-D IC. Process variations in 3-D ICs are first analyzed. The effect of process variations on synchronization and 3-D clock distribution networks, is carefully studied. A novel statistical model is proposed to describe the timing variation in 3-D clock distribution networks caused by process variations. Based on this model, different topologies of 3-D clock distribution networks are compared in terms of skew variation. A set of guidelines is proposed to design 3-D clock distribution networks with low clock uncertainty. Voltage variations are described by power supply noise. Power supply noise in 3-D ICs is investigated considering different characteristics of potential 3-D power grids in this thesis. A new algorithm is developed to fast analyze the steady-state IR-drop in 3-D power grids. The first droop of power supply noise, also called resonant supply noise, is usually the deepest voltage drop in power distribution networks. The effect of resonant supply noise on 3-D clock distribution networks is investigated. The combined effect of process variations and power supply noise is modeled by skitter consisting of both skew and jitter. A novel statistical model of skitter is proposed. Based on this proposed model and simulation results, a set of guidelines has been proposed to mitigate the negative effect of process and voltage variations on 3-D clock distribution networks. Thermal issues in 3-D ICs are considered by carefully modeling thermal through silicon vias (TTSVs) in this dissertation. TTSVs are vertical vias which do not carry signals, dedicated to facilitate the propagation of heat to reduce the temperature of 3-D ICs. Two analytic models are proposed to describe the heat transfer in 3-D circuits related to TTSVs herein, providing proper closed-form expressions for the thermal resistance of the TTSVs. The effect of different physical and geometric parameters of TTSVs on the temperature of 3-D ICs is analyzed. The proposed models can be used to fast and accurately estimate the temperature to avoid the overuse of TTSVs occupying a large portion of area. A set of models and design techniques is proposed in this dissertation to describe and mitigate the deleterious effects of process, voltage, and temperature variations in 3-D ICs. Due to the continuous shrink in the feature size of transistors, the large number of devices within one circuit, and the high operating frequency, the effect of these variations on the performance of 3-D ICs becomes increasingly significant. Accurately and efficiently estimating and controlling these variations are, consequently, critical tasks for the design of 3-D ICs

Sincronização em sistemas integrados a alta velocidade

Doutoramento em Engenharia ElectrotécnicaA distribui ção de um sinal relógio, com elevada precisão espacial (baixo skew) e temporal (baixo jitter ), em sistemas sí ncronos de alta velocidade tem-se revelado uma tarefa cada vez mais demorada e complexa devido ao escalonamento da tecnologia. Com a diminuição das dimensões dos dispositivos e a integração crescente de mais funcionalidades nos Circuitos Integrados (CIs), a precisão associada as transições do sinal de relógio tem sido cada vez mais afectada por varia ções de processo, tensão e temperatura. Esta tese aborda o problema da incerteza de rel ogio em CIs de alta velocidade, com o objetivo de determinar os limites do paradigma de desenho sí ncrono. Na prossecu ção deste objectivo principal, esta tese propõe quatro novos modelos de incerteza com âmbitos de aplicação diferentes. O primeiro modelo permite estimar a incerteza introduzida por um inversor est atico CMOS, com base em parâmetros simples e su cientemente gen éricos para que possa ser usado na previsão das limitações temporais de circuitos mais complexos, mesmo na fase inicial do projeto. O segundo modelo, permite estimar a incerteza em repetidores com liga ções RC e assim otimizar o dimensionamento da rede de distribui ção de relógio, com baixo esfor ço computacional. O terceiro modelo permite estimar a acumula ção de incerteza em cascatas de repetidores. Uma vez que este modelo tem em considera ção a correla ção entre fontes de ruí do, e especialmente util para promover t ecnicas de distribui ção de rel ogio e de alimentação que possam minimizar a acumulação de incerteza. O quarto modelo permite estimar a incerteza temporal em sistemas com m ultiplos dom ínios de sincronismo. Este modelo pode ser facilmente incorporado numa ferramenta autom atica para determinar a melhor topologia para uma determinada aplicação ou para avaliar a tolerância do sistema ao ru ído de alimentação. Finalmente, usando os modelos propostos, são discutidas as tendências da precisão de rel ogio. Conclui-se que os limites da precisão do rel ogio são, em ultima an alise, impostos por fontes de varia ção dinâmica que se preveem crescentes na actual l ogica de escalonamento dos dispositivos. Assim sendo, esta tese defende a procura de solu ções em outros ní veis de abstração, que não apenas o ní vel f sico, que possam contribuir para o aumento de desempenho dos CIs e que tenham um menor impacto nos pressupostos do paradigma de desenho sí ncrono.Distributing a the clock simultaneously everywhere (low skew) and periodically everywhere (low jitter) in high-performance Integrated Circuits (ICs) has become an increasingly di cult and time-consuming task, due to technology scaling. As transistor dimensions shrink and more functionality is packed into an IC, clock precision becomes increasingly a ected by Process, Voltage and Temperature (PVT) variations. This thesis addresses the problem of clock uncertainty in high-performance ICs, in order to determine the limits of the synchronous design paradigm. In pursuit of this main goal, this thesis proposes four new uncertainty models, with di erent underlying principles and scopes. The rst model targets uncertainty in static CMOS inverters. The main advantage of this model is that it depends only on parameters that can easily be obtained. Thus, it can provide information on upcoming constraints very early in the design stage. The second model addresses uncertainty in repeaters with RC interconnects, allowing the designer to optimise the repeater's size and spacing, for a given uncertainty budget, with low computational e ort. The third model, can be used to predict jitter accumulation in cascaded repeaters, like clock trees or delay lines. Because it takes into consideration correlations among variability sources, it can also be useful to promote oorplan-based power and clock distribution design in order to minimise jitter accumulation. A fourth model is proposed to analyse uncertainty in systems with multiple synchronous domains. It can be easily incorporated in an automatic tool to determine the best topology for a given application or to evaluate the system's tolerance to power-supply noise. Finally, using the proposed models, this thesis discusses clock precision trends. Results show that limits in clock precision are ultimately imposed by dynamic uncertainty, which is expected to continue increasing with technology scaling. Therefore, it advocates the search for solutions at other abstraction levels, and not only at the physical level, that may increase system performance with a smaller impact on the assumptions behind the synchronous design paradigm