Performance issues in hybrid fiber radio communication systems due to nonlinear distortion effects in laser transmitters

With the increasing demand for broadband services, it is expected that hybrid fiber radio systems may be employed to provide high capacity access networks for both mobile and fixed users. In these systems, the radio frequency data signals are modulated onto an optical carrier at a mobile switching centre and then sent over fiber to a number of base stations, before being transmitted over air to the users. A possible method of generating the optical radio frequency data signals for distribution over fiber is to directly modulate the electrical signal onto an optical carrier using a laser diode. The major problem with this technique is that nonlinearities in electncal-to-optical conversion may seriously degrade the system performance. In this work we initially examined the distribution of a wideband code division multiple access signal (centered around 6 GHz) through an optically fed microwave system. Our results show that the adjacent channel leakage ratio is degraded from -52 to -32 dBc after passing through the optical system. We then examined the technique of externally injecting light into the directly modulated laser, to extend the bandwidth of the laser diode and hence, increase it’s linear region to beyond the frequency of interest With this technique an improvement of over 10 dB in the adjacent channel leakage ratio of the signal was achieved. We subsequently went on to examine the distribution of a 5-channel radio frequency signal (each channel carrying 10 Mbit/s) through a hybrid fiber system As in the previous work, we examined how external light injection into the directly modulated laser could be used to improve system performance, and our results show an improvement of up to 5 dB. Finally a model was designed using Matlab, which simulated the 5-channel system mentioned above. It used the laser rate equations to mimic the nonlinear effects of the laser diode Good correlation was observed between experimental and simulated results

Study on wideband voltage controlled oscillator and high efficiency power amplifier ICs for wireless communications

制度:新 ; 報告番号:甲3604号 ; 学位の種類:博士(工学) ; 授与年月日:2012/2/20 ; 早大学位記番号:新595

IMPLEMENTATION AND PERFORMANCE ANALYSIS OF LONG TERM EVOLUTION USING SOFTWARE DEFINED RADIO

The overwhelming changes in the field of communication brought about need for high data rates, which led to the development of a system known as Long Term Evolution (LTE). LTE made good use of Orthogonal Frequency Division Multiplexing Access (OFDMA) in its downlink and Single Carrier Frequency Division Multiplexing Access (SCFDMA) in its uplink transmission because of their robust performance. These multiple access techniques are the major focus of study in this thesis, with their implementation in the LTE system. GNU Radio is a software Defined Radio (SDR) platform. It comprises of C++ signal processing libraries. For user simplicity, it has graphical user interface (GUI) known as GNU Radio Companion (GRC), to build a signal processing flow graph. GRC translates any specific task flow graph to a python program which calls inbuiltC++ signal processing blocks. By leveraging this feature and existing modules in GRC, OFDMA and SCFDMA is implemented. In this study we made use of existing OFDMA flow graph of GNU Radio to study the behavior of downlink and general performing SCFDMA system was implemented with some modifications of the existing GNU Radio blocks. With the GNU Radio implementation, we tested the working mechanism of both the systems. OFDMA is used in downlink for achieving high spectral efficiency and SCFDMA was introduced in uplink due to its low PAPR feature. These multiple access schemes have to meet the requirement of high throughput with low BER and PAPR, low delays and low complexity. In this thesis we are focused on evaluating these multiple access techniques in terms of BER and PAPR with modulation techniques like QPSK, 16-QAM and 64-QAM. Performance analysis part is performed in MATLAB

System capacity enhancement for 5G network and beyond

A thesis submitted to the University of Bedfordshire, in fulfilment of the requirements for the degree of Doctor of PhilosophyThe demand for wireless digital data is dramatically increasing year over year. Wireless communication systems like Laptops, Smart phones, Tablets, Smart watch, Virtual Reality devices and so on are becoming an important part of people’s daily life. The number of mobile devices is increasing at a very fast speed as well as the requirements for mobile devices such as super high-resolution image/video, fast download speed, very short latency and high reliability, which raise challenges to the existing wireless communication networks. Unlike the previous four generation communication networks, the fifth-generation (5G) wireless communication network includes many technologies such as millimetre-wave communication, massive multiple-input multiple-output (MIMO), visual light communication (VLC), heterogeneous network (HetNet) and so forth. Although 5G has not been standardised yet, these above technologies have been studied in both academia and industry and the goal of the research is to enhance and improve the system capacity for 5G networks and beyond by studying some key problems and providing some effective solutions existing in the above technologies from system implementation and hardware impairments’ perspective. The key problems studied in this thesis include interference cancellation in HetNet, impairments calibration for massive MIMO, channel state estimation for VLC, and low latency parallel Turbo decoding technique. Firstly, inter-cell interference in HetNet is studied and a cell specific reference signal (CRS) interference cancellation method is proposed to mitigate the performance degrade in enhanced inter-cell interference coordination (eICIC). This method takes carrier frequency offset (CFO) and timing offset (TO) of the user’s received signal into account. By reconstructing the interfering signal and cancelling it afterwards, the capacity of HetNet is enhanced. Secondly, for massive MIMO systems, the radio frequency (RF) impairments of the hardware will degrade the beamforming performance. When operated in time duplex division (TDD) mode, a massive MIMO system relies on the reciprocity of the channel which can be broken by the transmitter and receiver RF impairments. Impairments calibration has been studied and a closed-loop reciprocity calibration method is proposed in this thesis. A test device (TD) is introduced in this calibration method that can estimate the transmitters’ impairments over-the-air and feed the results back to the base station via the Internet. The uplink pilots sent by the TD can assist the BS receivers’ impairment estimation. With both the uplink and downlink impairments estimates, the reciprocity calibration coefficients can be obtained. By computer simulation and lab experiment, the performance of the proposed method is evaluated. Channel coding is an essential part of a wireless communication system which helps fight with noise and get correct information delivery. Turbo codes is one of the most reliable codes that has been used in many standards such as WiMAX and LTE. However, the decoding process of turbo codes is time-consuming and the decoding latency should be improved to meet the requirement of the future network. A reverse interleave address generator is proposed that can reduce the decoding time and a low latency parallel turbo decoder has been implemented on a FPGA platform. The simulation and experiment results prove the effectiveness of the address generator and show that there is a trade-off between latency and throughput with a limited hardware resource. Apart from the above contributions, this thesis also investigated multi-user precoding for MIMO VLC systems. As a green and secure technology, VLC is achieving more and more attention and could become a part of 5G network especially for indoor communication. For indoor scenario, the MIMO VLC channel could be easily ill-conditioned. Hence, it is important to study the impact of the channel state to the precoding performance. A channel state estimation method is proposed based on the signal to interference noise ratio (SINR) of the users’ received signal. Simulation results show that it can enhance the capacity of the indoor MIMO VLC system

Calibrated Continuous-Time Sigma-Delta Modulators

To provide more information mobility, many wireless communication systems such as WCDMA and EDGE in phone systems, bluetooth and WIMAX in communication networks have been recently developed. Recent efforts have been made to build the allin- one next generation device which integrates a large number of wireless services into a single receiving path in order to raise the competitiveness of the device. Among all the receiver architectures, the high-IF receiver presents several unique properties for the next generation receiver by digitalizing the signal at the intermediate frequency around a few hundred MHz. In this architecture, the modulation/demodulation schemes, protocols, equalization, etc., are all determined in a software platform that runs in the digital signal processor (DSP) or FPGA. The specifications for most of front-end building blocks are relaxed, except the analog-to-digital converter (ADC). The requirements of large bandwidth, high operational frequency and high resolution make the design of the ADC very challenging. Solving the bottleneck associated with the high-IF receiver architecture is a major focus of many ongoing research efforts. In this work, a 6th-order bandpass continuous time sigma-delta ADC with measured 68.4dB SNDR at 10MHz bandwidth to accommodate video applications is proposed. Tuned at 200 MHz, the fs/4 architecture employs an 800 MHz clock frequency. By making use of a unique software-based calibration scheme together with the tuning properties of the bandpass filters developed under the umbrella of this project, the ADC performance is optimized automatically to fulfill all requirements for the high-IF architecture. In a separate project, other critical design issues for continuous-time sigma-delta ADCs are addressed, especially the issues related to unit current source mismatches in multi-level DACs as well as excess loop delays that may cause loop instability. The reported solutions are revisited to find more efficient architectures. The aforementioned techniques are used for the design of a 25MHz bandwidth lowpass continuous-time sigma-delta modulator with time-domain two-step 3-bit quantizer and DAC for WiMAX applications. The prototype is designed by employing a level-to-pulse-width modulation (PWM) converter followed by a single-level DAC in the feedback path to translate the typical digital codes into PWM signals with the proposed pulse arrangement. Therefore, the non-linearity issue from current source mismatch in multi-level DACs is prevented. The jitter behavior and timing mismatch issue of the proposed time-based methods are fully analyzed. The measurement results of a chip prototype achieving 67.7dB peak SNDR and 78dB SFDR in 25MHz bandwidth properly demonstrate the design concepts and effectiveness of time-based quantization and feedback. Both continuous-time sigma-delta ADCs were fabricated in mainstream CMOS 0.18um technologies, which are the most popular in today?s consumer electronics industry

Proceedings of the Third International Mobile Satellite Conference (IMSC 1993)

Satellite-based mobile communications systems provide voice and data communications to users over a vast geographic area. The users may communicate via mobile or hand-held terminals, which may also provide access to terrestrial cellular communications services. While the first and second International Mobile Satellite Conferences (IMSC) mostly concentrated on technical advances, this Third IMSC also focuses on the increasing worldwide commercial activities in Mobile Satellite Services. Because of the large service areas provided by such systems, it is important to consider political and regulatory issues in addition to technical and user requirements issues. Topics covered include: the direct broadcast of audio programming from satellites; spacecraft technology; regulatory and policy considerations; advanced system concepts and analysis; propagation; and user requirements and applications

Power-efficient current-mode analog circuits for highly integrated ultra low power wireless transceivers

In this thesis, current-mode low-voltage and low-power techniques have been applied to implement novel analog circuits for zero-IF receiver backend design, focusing on amplification, filtering and detection stages. The structure of the thesis follows a bottom-up scheme: basic techniques at device level for low voltage low power operation are proposed in the first place, followed by novel circuit topologies at cell level, and finally the achievement of new designs at system level. At device level the main contribution of this work is the employment of Floating-Gate (FG) and Quasi-Floating-Gate (QFG) transistors in order to reduce the power consumption. New current-mode basic topologies are proposed at cell level: current mirrors and current conveyors. Different topologies for low-power or high performance operation are shown, being these circuits the base for the system level designs. At system level, novel current-mode amplification, filtering and detection stages using the former mentioned basic cells are proposed. The presented current-mode filter makes use of companding techniques to achieve high dynamic range and very low power consumption with for a very wide tuning range. The amplification stage avoids gain bandwidth product achieving a constant bandwidth for different gain configurations using a non-linear active feedback network, which also makes possible to tune the bandwidth. Finally, the proposed current zero-crossing detector represents a very power efficient mixed signal detector for phase modulations. All these designs contribute to the design of very low power compact Zero-IF wireless receivers. The proposed circuits have been fabricated using a 0.5μm double-poly n-well CMOS technology, and the corresponding measurement results are provided and analyzed to validate their operation. On top of that, theoretical analysis has been done to fully explore the potential of the resulting circuits and systems in the scenario of low-power low-voltage applications.Programa Oficial de Doctorado en Tecnologías de las Comunicaciones (RD 1393/2007)Komunikazioen Teknologietako Doktoretza Programa Ofiziala (ED 1393/2007

Performance evaluation of a 40 GHz broadband cellular system

Doutoramento em Engenharia ElectrónicaO trabalho apresentado nesta tese enquadra-se na área das comunicações móveis celulares e tem subjacente a utilização de um protótipo de um sistema de comunicações móveis de banda larga desenvolvido no âmbito do projecto Europeu SAMBA. Este protótipo apresenta como principais características inovadoras as taxas de transmissão, a frequência de operação, a mobilidade e os protocolos de handover rádio. Inicialmente são descritos aspectos relacionados com a evolução das comunicações móveis ao longo do tempo e apresentados conceitos teóricos fundamentais para compreender o comportamento do canal rádio móvel e os mecanismos de propagação. São identificados os tipos de desvanecimento e descritos os vários parâmetros que permitem caracterizar o canal rádio. A descrição do impacto do desvanecimento e as formas de o mitigar são apresentadas para contextualizar o trabalho desenvolvido em termos da especificação do protótipo e as opções escolhidas. As características globais do protótipo são apresentadas o que inclui a descrição do interface rádio, da arquitectura, dos módulos de RF, dos módulos de processamento de banda base, protocolos e algoritmo de transferência rádio. O protótipo foi avaliado em vários cenários com diferentes características. No cenário exterior foi analisada uma rua urbana típica do tipo canyon. Em termos de configuração do sistema foram consideradas e analisadas várias alturas da Estação Base, anglos de inclinação das antenas, várias velocidades da Terminal Móvel, operação com e sem linha de vista e a penetração do sinal rádio em ruas transversais. No cenário interior foram realizados testes similares e medidas relativas às transferências que só foram executadas para este cenário por questões logísticas. Numa primeira abordagem foi analisada a cobertura oferecida por cada célula e posteriormente activada a funcionalidade de transferência. Foram também efectuados estudos com uma única Estação Base cobrindo toda a área. Em termos de caracterização do canal rádio em banda larga são apresentadas medidas da resposta impulsiva para dois cenários interiores e complementados por outros estudos via simulação utilizando uma ferramenta de ray tracing. Nas medidas foi utilizado um método de medição do canal no domínio da frequência. A relação entre o Espalhamento do Atraso e a Banda de Coerência em diferentes cenários foi analisada em detalhe e feita a verificação em termos da violação do limite teórico de Fleury. Como consequência dos tópicos abordados, esta tese apresenta um estudo abrangente de aspectos relacionados com o comportamento do canal rádio na faixa dos 40 GHz e a análise das opções técnicas do protótipo em termos do seu desempenho no âmbito dos sistemas de comunicações móveis 4G.The work presented in this thesis addresses the area of mobile cellular broadband communications and encompasses the utilization of a prototype developed in the framework of the European project SAMBA. This prototype has as main innovative characteristics the transmission rates, the frequency band of operation, the mobility and the radio handover protocols. Initially are described aspects related with the historical evolution of the mobile communications and presented fundamental theoretical concepts to understand the behaviour of the radio channel and the propagation mechanisms. The different types of fading are identified as well as the various parameters that allow the characterisation of the radio channel. The fading impact and its mitigation techniques are presented to contextualise the work developed in terms of the specification of the features implemented in the prototype and the options available. The global characteristic of the prototype are presented namely the radio interface, the architecture, the RF modules, the baseband modules, protocols and the algorithm for the radio handover. The prototype was evaluated in various scenarios with different characteristics. In the outdoor scenario a canyon type street was analysed. Several heights of the Base Station, antenna tilting angles, Mobile Terminal velocities, operation in line-of-sight and non line-of-sight and the penetration of the signal in a transversal street. In the indoor scenario similar measurements were performed. The handover feature was analysed just for this scenario due to logistic reasons. In a first phase the coverage provided by each Base Station was analysed and subsequently activated the handover functionality. Studies using a single Base Station to cover the whole pavilion were also performed. In terms of broadband analysis, channel impulse response measurements were performed using a frequency domain technique in two scenarios and complemented by others analysed only using a ray tracing simulation tool. The relationship between the radio channel Delay Spread and the Coherence Bandwidth was analysed in different scenarios and the possible violation of the Fleury lower bond checked. As a consequence of the several topics covered in this thesis, a deep study of the aspects related with the behaviour of the radio channel in the 40 GHz band and the performance of the technical options implemented in the prototype is presented in the framework of 4G mobile communication systems

Development of Robust Analog and Mixed-Signal Circuits in the Presence of Process- Voltage-Temperature Variations

Continued improvements of transceiver systems-on-a-chip play a key role in the advancement of mobile telecommunication products as well as wireless systems in biomedical and remote sensing applications. This dissertation addresses the problems of escalating CMOS process variability and system complexity that diminish the reliability and testability of integrated systems, especially relating to the analog and mixed-signal blocks. The proposed design techniques and circuit-level attributes are aligned with current built-in testing and self-calibration trends for integrated transceivers. In this work, the main focus is on enhancing the performances of analog and mixed-signal blocks with digitally adjustable elements as well as with automatic analog tuning circuits, which are experimentally applied to conventional blocks in the receiver path in order to demonstrate the concepts. The use of digitally controllable elements to compensate for variations is exemplified with two circuits. First, a distortion cancellation method for baseband operational transconductance amplifiers is proposed that enables a third-order intermodulation (IM3) improvement of up to 22dB. Fabricated in a 0.13µm CMOS process with 1.2V supply, a transconductance-capacitor lowpass filter with the linearized amplifiers has a measured IM3 below -70dB (with 0.2V peak-to-peak input signal) and 54.5dB dynamic range over its 195MHz bandwidth. The second circuit is a 3-bit two-step quantizer with adjustable reference levels, which was designed and fabricated in 0.18µm CMOS technology as part of a continuous-time SigmaDelta analog-to-digital converter system. With 5mV resolution at a 400MHz sampling frequency, the quantizer's static power dissipation is 24mW and its die area is 0.4mm^2. An alternative to electrical power detectors is introduced by outlining a strategy for built-in testing of analog circuits with on-chip temperature sensors. Comparisons of an amplifier's measurement results at 1GHz with the measured DC voltage output of an on-chip temperature sensor show that the amplifier's power dissipation can be monitored and its 1-dB compression point can be estimated with less than 1dB error. The sensor has a tunable sensitivity up to 200mV/mW, a power detection range measured up to 16mW, and it occupies a die area of 0.012mm^2 in standard 0.18µm CMOS technology. Finally, an analog calibration technique is discussed to lessen the mismatch between transistors in the differential high-frequency signal path of analog CMOS circuits. The proposed methodology involves auxiliary transistors that sense the existing mismatch as part of a feedback loop for error minimization. It was assessed by performing statistical Monte Carlo simulations of a differential amplifier and a double-balanced mixer designed in CMOS technologies

Dark signalling and code division multiple access in an optical fibre LAN with a bus topology

This thesis describes an optical fibre network that uses a bus topology and Code Division Multiple Access (CDMA). Various potential configurations are analysed and compared and it is shown that a serious limitation of optical CDMA schemes using incoherent correlators is the effect of optical beating due to the presence of multiple incoherent optical signals at the receiver photodiode. The network proposed and analysed in this thesis avoids beating between multiple optical fields because it only uses a single, shared, optical source. It does this through the SLIM (Single Light-source with In-line Modulation) configuration in which there is a continuously-operating light source at the head-end of a folded bus, and modulators at the nodes to impose signals on the optical field in the form of pulses of darkness which propagate along the otherwise continuously bright bus. Optical CDMA can use optical-fibre delay-line correlators as matched filters, and these may be operated either coherently or incoherently.Coherent operation is significantly more complex than incoherent operation, but incoherent correlators introduce further beating even in a SLIM network. A new design of optical delay-line correlator, the hybrid correlator, is therefore proposed, analysed and demonstrated. It is shown to eliminate beating. A model of a complete network predicts that a SLIMbus using optical CDMA with hybrid correlators can be operated at TeraBaud rates with the number of simultaneous users limited by multiple access interference (MAI), determined only by the combinatorics of the code set