Improving Network-on-Chip-based Turbo Decoder Architectures

In this work novel results concerning Networkon- Chip-based turbo decoder architectures are presented. Stemming from previous publications, this work concentrates first on improving the throughput by exploiting adaptive-bandwidth-reduction techniques. This technique shows in the best case an improvement of more than 60 Mb/s. Moreover, it is known that double-binary turbo decoders require higher area than binary ones. This characteristic has the negative effect of increasing the data width of the network nodes. Thus, the second contribution of this work is to reduce the network complexity to support doublebinary codes, by exploiting bit-level and pseudo-floatingpoint representation of the extrinsic information. These two techniques allow for an area reduction of up to more than the 40 % with a performance degradation of about 0.2 d

Efficient FPGA Implementation of a CTC Turbo Decoder for WiMAX/LTE Mobile Systems

This chapter describes the implementation on field programmable gate array (FPGA) of a turbo decoder for 3GPP long-term evolution (LTE) standard, respectively, for IEEE 802.16-based WiMAX systems. We initially present the serial decoding architectures for the two systems. The same approach is used; although for WiMAX the scheme implements a duo-binary code, while for LTE a binary code is included. The proposed LTE serial decoding scheme is adapted for parallel transformation. Then, considering the LTE high throughput requirements, a parallel decoding solution is proposed. Considering a parallelization with N = 2p levels, the parallel approach reduces the decoding latency N times versus the serial decoding one. For parallel approach the decoding performance suffers a small degradation, but we propose a solution that almost eliminates this degradation, by performing an overlapped data block split. Moreover, considering the native properties of the LTE quadratic permutation polynomial (QPP) interleaver, we propose a simplified parallel decoder architecture. The novelty of this scheme is that only one interleaver module is used, no matter the value of N, by introducing an even-odd merge sorting network. We propose for it a recursive approach that uses only comparators and subtractors

Reconfigurable Turbo/Viterbi Channel Decoder in the Coarse-Grained Montium Architecture

Mobile wireless communication systems become multi-mode systems. These future mobile systems employ multiple wireless communication standards, which are different by means of algorithms that are used to implement the baseband processing and the channel decoding. Efficient implementation of multiple wireless standards in mobile terminals requires energy-efficient and flexible hardware. We propose to implement both the baseband processing and channel decoding in a heterogeneous reconfigurable system-on-chip. The system-on-chip contains many processing elements of different granularities, which includes our coarse-grained reconfigurable MONTIUM architecture. We already showed the feasibility to implement the baseband processing of OFDM and WCDMA based communication systems in the MONTIUM. In this paper we implemented two kinds of channel decoders in the same MONTIUM architecture: Viterbi and Turbo decoding

Energy-efficient design and implementation of turbo codes for wireless sensor network

The objective of this thesis is to apply near Shannon limit Error-Correcting Codes (ECCs), particularly the turbo-like codes, to energy-constrained wireless devices, for the purpose of extending their lifetime. Conventionally, sophisticated ECCs are applied to applications, such as mobile telephone networks or satellite television networks, to facilitate long range and high throughput wireless communication. For low power applications, such as Wireless Sensor Networks (WSNs), these ECCs were considered due to their high decoder complexities. In particular, the energy efficiency of the sensor nodes in WSNs is one of the most important factors in their design. The processing energy consumption required by high complexity ECCs decoders is a significant drawback, which impacts upon the overall energy consumption of the system. However, as Integrated Circuit (IC) processing technology is scaled down, the processing energy consumed by hardware resources reduces exponentially. As a result, near Shannon limit ECCs have recently begun to be considered for use in WSNs to reduce the transmission energy consumption [1,2]. However, to ensure that the transmission energy consumption reduction granted by the employed ECC makes a positive improvement on the overall energy efficiency of the system, the processing energy consumption must still be carefully considered.The main subject of this thesis is to optimise the design of turbo codes at both an algorithmic and a hardware implementation level for WSN scenarios. The communication requirements of the target WSN applications, such as communication distance, channel throughput, network scale, transmission frequency, network topology, etc, are investigated. Those requirements are important factors for designing a channel coding system. Especially when energy resources are limited, the trade-off between the requirements placed on different parameters must be carefully considered, in order to minimise the overall energy consumption. Moreover, based on this investigation, the advantages of employing near Shannon limit ECCs in WSNs are discussed. Low complexity and energy-efficient hardware implementations of the ECC decoders are essential for the target applications

Exploring High Level Synthesis to Improve the Design of Turbo Code Error Correction in a Software Defined Radio Context

With the ever improving progress of technology, Software Defined Radio (SDR) has become a more widely available technique for implementing radio communication. SDRs are sought after for their advantages over traditional radio communication mostly in flexibility, and hardware simplification. The greatest challenges SDRs face are often with their real time performance requirements. Forward error correction is an example of an SDR block that can exemplify these challenges as the error correction can be very computationally intensive. Due to these constraints, SDR implementations are commonly found in or alongside Field Programmable Gate Arrays (FPGAs) to enable performance that general purpose processors alone cannot achieve. The main challenge with FPGAs however, is in Register Transfer Level (RTL) development. High Level Synthesis (HLS) tools are a method of creating hardware descriptions from high level code, in an effort to ease this development process. In this work a turbo code decoder, a form of computationally intensive error correction codes, was accelerated with the help of FPGAs, using HLS tools. This accelerator was implemented on a Xilinx Zynq platform, which integrates a hard core ARM processor alongside programmable logic on a single chip. Important aspects of the design process using HLS were identified and explained. The design process emphasizes the idea that for the best results the high level code should be created with a hardware mindset, and written in an attempt to describe a hardware design. The power of the HLS tools was demonstrated in its flexibility by providing a method of tailoring the hardware parameters through simply changing values in a macro file, and by exploration the design space through different data types and three different designs, each one improving from what was learned in the previous implementation. Ultimately, the best hardware implementation was over 56 times faster than the optimized software implementation. Comparing the HLS to a manually optimized design shows that the HLS implementation was able to achieve over a 19% throughput, with many areas for further improvement identified, demonstrating the competitiveness of the HLS tools