Voice source characterization for prosodic and spectral manipulation

The objective of this dissertation is to study and develop techniques to decompose the speech signal into its two main components: voice source and vocal tract. Our main efforts are on the glottal pulse analysis and characterization. We want to explore the utility of this model in different areas of speech processing: speech synthesis, voice conversion or emotion detection among others. Thus, we will study different techniques for prosodic and spectral manipulation. One of our requirements is that the methods should be robust enough to work with the large databases typical of speech synthesis. We use a speech production model in which the glottal flow produced by the vibrating vocal folds goes through the vocal (and nasal) tract cavities and its radiated by the lips. Removing the effect of the vocal tract from the speech signal to obtain the glottal pulse is known as inverse filtering. We use a parametric model fo the glottal pulse directly in the source-filter decomposition phase. In order to validate the accuracy of the parametrization algorithm, we designed a synthetic corpus using LF glottal parameters reported in the literature, complemented with our own results from the vowel database. The results show that our method gives satisfactory results in a wide range of glottal configurations and at different levels of SNR. Our method using the whitened residual compared favorably to this reference, achieving high quality ratings (Good-Excellent). Our full parametrized system scored lower than the other two ranking in third place, but still higher than the acceptance threshold (Fair-Good). Next we proposed two methods for prosody modification, one for each of the residual representations explained above. The first method used our full parametrization system and frame interpolation to perform the desired changes in pitch and duration. The second method used resampling on the residual waveform and a frame selection technique to generate a new sequence of frames to be synthesized. The results showed that both methods are rated similarly (Fair-Good) and that more work is needed in order to achieve quality levels similar to the reference methods. As part of this dissertation, we have studied the application of our models in three different areas: voice conversion, voice quality analysis and emotion recognition. We have included our speech production model in a reference voice conversion system, to evaluate the impact of our parametrization in this task. The results showed that the evaluators preferred our method over the original one, rating it with a higher score in the MOS scale. To study the voice quality, we recorded a small database consisting of isolated, sustained Spanish vowels in four different phonations (modal, rough, creaky and falsetto) and were later also used in our study of voice quality. Comparing the results with those reported in the literature, we found them to generally agree with previous findings. Some differences existed, but they could be attributed to the difficulties in comparing voice qualities produced by different speakers. At the same time we conducted experiments in the field of voice quality identification, with very good results. We have also evaluated the performance of an automatic emotion classifier based on GMM using glottal measures. For each emotion, we have trained an specific model using different features, comparing our parametrization to a baseline system using spectral and prosodic characteristics. The results of the test were very satisfactory, showing a relative error reduction of more than 20% with respect to the baseline system. The accuracy of the different emotions detection was also high, improving the results of previously reported works using the same database. Overall, we can conclude that the glottal source parameters extracted using our algorithm have a positive impact in the field of automatic emotion classification

Noise-Robust Voice Conversion

A persistent challenge in speech processing is the presence of noise that reduces the quality of speech signals. Whether natural speech is used as input or speech is the desirable output to be synthesized, noise degrades the performance of these systems and causes output speech to be unnatural. Speech enhancement deals with such a problem, typically seeking to improve the input speech or post-processes the (re)synthesized speech. An intriguing complement to post-processing speech signals is voice conversion, in which speech by one person (source speaker) is made to sound as if spoken by a different person (target speaker). Traditionally, the majority of speech enhancement and voice conversion methods rely on parametric modeling of speech. A promising complement to parametric models is an inventory-based approach, which is the focus of this work. In inventory-based speech systems, one records an inventory of clean speech signals as a reference. Noisy speech (in the case of enhancement) or target speech (in the case of conversion) can then be replaced by the best-matching clean speech in the inventory, which is found via a correlation search method. Such an approach has the potential to alleviate intelligibility and unnaturalness issues often encountered by parametric modeling speech processing systems. This work investigates and compares inventory-based speech enhancement methods with conventional ones. In addition, the inventory search method is applied to estimate source speaker characteristics for voice conversion in noisy environments. Two noisy-environment voice conversion systems were constructed for a comparative study: a direct voice conversion system and an inventory-based voice conversion system, both with limited noise filtering at the front end. Results from this work suggest that the inventory method offers encouraging improvements over the direct conversion method

In Car Audio

This chapter presents implementations of advanced in Car Audio Applications. The system is composed by three main different applications regarding the In Car listening and communication experience. Starting from a high level description of the algorithms, several implementations on different levels of hardware abstraction are presented, along with empirical results on both the design process undergone and the performance results achieved

A novel framework for high-quality voice source analysis and synthesis

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The analysis, parameterization and modeling of voice source estimates obtained via inverse filtering of recorded speech are some of the most challenging areas of speech processing owing to the fact humans produce a wide range of voice source realizations and that the voice source estimates commonly contain artifacts due to the non-linear time-varying source-filter coupling. Currently, the most widely adopted representation of voice source signal is Liljencrants-Fant's (LF) model which was developed in late 1985. Due to the overly simplistic interpretation of voice source dynamics, LF model can not represent the fine temporal structure of glottal flow derivative realizations nor can it carry the sufficient spectral richness to facilitate a truly natural sounding speech synthesis. In this thesis we have introduced Characteristic Glottal Pulse Waveform Parameterization and Modeling (CGPWPM) which constitutes an entirely novel framework for voice source analysis, parameterization and reconstruction. In comparative evaluation of CGPWPM and LF model we have demonstrated that the proposed method is able to preserve higher levels of speaker dependant information from the voice source estimates and realize a more natural sounding speech synthesis. In general, we have shown that CGPWPM-based speech synthesis rates highly on the scale of absolute perceptual acceptability and that speech signals are faithfully reconstructed on consistent basis, across speakers, gender. We have applied CGPWPM to voice quality profiling and text-independent voice quality conversion method. The proposed voice conversion method is able to achieve the desired perceptual effects and the modified speech remained as natural sounding and intelligible as natural speech. In this thesis, we have also developed an optimal wavelet thresholding strategy for voice source signals which is able to suppress aspiration noise and still retain both the slow and the rapid variations in the voice source estimate

A Parametric Approach for Efficient Speech Storage, Flexible Synthesis and Voice Conversion

During the past decades, many areas of speech processing have benefited from the vast increases in the available memory sizes and processing power. For example, speech recognizers can be trained with enormous speech databases and high-quality speech synthesizers can generate new speech sentences by concatenating speech units retrieved from a large inventory of speech data. However, even in today's world of ever-increasing memory sizes and computational resources, there are still lots of embedded application scenarios for speech processing techniques where the memory capacities and the processor speeds are very limited. Thus, there is still a clear demand for solutions that can operate with limited resources, e.g., on low-end mobile devices. This thesis introduces a new segmental parametric speech codec referred to as the VLBR codec. The novel proprietary sinusoidal speech codec designed for efficient speech storage is capable of achieving relatively good speech quality at compression ratios beyond the ones offered by the standardized speech coding solutions, i.e., at bitrates of approximately 1 kbps and below. The efficiency of the proposed coding approach is based on model simplifications, mode-based segmental processing, and the method of adaptive downsampling and quantization. The coding efficiency is also further improved using a novel flexible multi-mode matrix quantizer structure and enhanced dynamic codebook reordering. The compression is also facilitated using a new perceptual irrelevancy removal method. The VLBR codec is also applied to text-to-speech synthesis. In particular, the codec is utilized for the compression of unit selection databases and for the parametric concatenation of speech units. It is also shown that the efficiency of the database compression can be further enhanced using speaker-specific retraining of the codec. Moreover, the computational load is significantly decreased using a new compression-motivated scheme for very fast and memory-efficient calculation of concatenation costs, based on techniques and implementations used in the VLBR codec. Finally, the VLBR codec and the related speech synthesis techniques are complemented with voice conversion methods that allow modifying the perceived speaker identity which in turn enables, e.g., cost-efficient creation of new text-to-speech voices. The VLBR-based voice conversion system combines compression with the popular Gaussian mixture model based conversion approach. Furthermore, a novel method is proposed for converting the prosodic aspects of speech. The performance of the VLBR-based voice conversion system is also enhanced using a new approach for mode selection and through explicit control of the degree of voicing. The solutions proposed in the thesis together form a complete system that can be utilized in different ways and configurations. The VLBR codec itself can be utilized, e.g., for efficient compression of audio books, and the speech synthesis related methods can be used for reducing the footprint and the computational load of concatenative text-to-speech synthesizers to levels required in some embedded applications. The VLBR-based voice conversion techniques can be used to complement the codec both in storage applications and in connection with speech synthesis. It is also possible to only utilize the voice conversion functionality, e.g., in games or other entertainment applications

Methods for speaking style conversion from normal speech to high vocal effort speech

This thesis deals with vocal-effort-focused speaking style conversion (SSC). Specifically, we studied two topics on conversion of normal speech to high vocal effort. The first topic involves the conversion of normal speech to shouted speech. We employed this conversion in a speaker recognition system with vocal effort mismatch between test and enrollment utterances (shouted speech vs. normal speech). The mismatch causes a degradation of the system's speaker identification performance. As solution, we proposed a SSC system that included a novel spectral mapping, used along a statistical mapping technique, to transform the mel-frequency spectral energies of normal speech enrollment utterances towards their counterparts in shouted speech. We evaluated the proposed solution by comparing speaker identification rates for a state-of-the-art i-vector-based speaker recognition system, with and without applying SSC to the enrollment utterances. Our results showed that applying the proposed SSC pre-processing to the enrollment data improves considerably the speaker identification rates. The second topic involves a normal-to-Lombard speech conversion. We proposed a vocoder-based parametric SSC system to perform the conversion. This system first extracts speech features using the vocoder. Next, a mapping technique, robust to data scarcity, maps the features. Finally, the vocoder synthesizes the mapped features into speech. We used two vocoders in the conversion system, for comparison: a glottal vocoder and the widely used STRAIGHT. We assessed the converted speech from the two vocoder cases with two subjective listening tests that measured similarity to Lombard speech and naturalness. The similarity subjective test showed that, for both vocoder cases, our proposed SSC system was able to convert normal speech to Lombard speech. The naturalness subjective test showed that the converted samples using the glottal vocoder were clearly more natural than those obtained with STRAIGHT

Security and privacy problems in voice assistant applications: A survey

Voice assistant applications have become omniscient nowadays. Two models that provide the two most important functions for real-life applications (i.e., Google Home, Amazon Alexa, Siri, etc.) are Automatic Speech Recognition (ASR) models and Speaker Identification (SI) models. According to recent studies, security and privacy threats have also emerged with the rapid development of the Internet of Things (IoT). The security issues researched include attack techniques toward machine learning models and other hardware components widely used in voice assistant applications. The privacy issues include technical-wise information stealing and policy-wise privacy breaches. The voice assistant application takes a steadily growing market share every year, but their privacy and security issues never stopped causing huge economic losses and endangering users' personal sensitive information. Thus, it is important to have a comprehensive survey to outline the categorization of the current research regarding the security and privacy problems of voice assistant applications. This paper concludes and assesses five kinds of security attacks and three types of privacy threats in the papers published in the top-tier conferences of cyber security and voice domain