Piezoelectric vibration damping using resonant shunt circuits: an exact solution

peer reviewe

Implementation of an Electronic Circuit for SSSA Control Approach of a Plate Type Element and Experimental Match with a Feed-Forward Approach

Abstract Successful implementation of an active vibration control system is strictly correlated to the exact knowledge of the dynamic behavior of the system, of the excitation level and spectra and of the sensor and actuator's specification. Only the correct management of these aspects may guarantee the correct choice of the control strategy and the relative performance. Within this paper, some preliminary activities aimed at the creation of a structurally simple, cheap and easily replaceable active control systems for metal panels are discussed. The final future aim is to control and to reduce noise, produced by vibrations of metal panels of the body of a car. The paper is focused on two points. The first one is the realization of an electronic circuit for Synchronized Shunted Switch Architecture (SSSA) with the right dimensioning of the components to control the proposed test article, represented by a rectangular aluminum plate. The second one is a preliminary experimental study on the test article, in controlled laboratory conditions, to compare performances of two possible control approach: SSSA and a feed-forward control approach. This comparison would contribute to the future choice of the most suitable control architecture for the specific attenuation of structure-born noise related to an automotive floor structure under deterministic (engine and road-tyre interaction) and stochastic (road-tyre interaction and aerodynamic) forcing actions

Performance of piezoelectric shunts for vibration reduction

This work addresses passive reduction of structural vibration by means of shunted piezoelectric patches. The two classical resistive and resonant shunt solutions are considered. The main goal of this paper is to give closed-form solutions to systematically estimate the damping performances of the shunts, in the two cases of free and forced vibrations, whatever the elastic host structure is. Then it is carefully demonstrated that the performance of the shunt, in terms of vibration reduction, depends on only one free parameter: the so-called modal electromechanical coupling factor (MEMCF) of the mechanical vibration mode to which the shunts are tuned. Experiments are proposed and an excellent agreement with the model is obtained, thus validating it

Effect of shunted piezoelectric control for tuning piezoelectric power harvesting system responses – Analytical techniques

This paper presents new analytical modelling of shunt circuit control responses for tuning electromechanical piezoelectric vibration power harvesting structures with proof mass offset. For this combination, the dynamic closed-form boundary value equations reduced from strong form variational principles were developed using the extended Hamiltonian principle to formulate the new coupled orthonormalised electromechanical power harvesting equations showing combinations of the mechanical system (dynamical behaviour of piezoelectric structure), electromechanical system (electrical piezoelectric response) and electrical system (tuning and harvesting circuits). The reduced equations can be further formulated to give the complete forms of new electromechanical multi-mode FRFs and time waveform of the standard AC-DC circuit interface. The proposed technique can demonstrate self-adaptive harvesting response capabilities for tuning the frequency band and the power amplitude of the harvesting devices. The self-adaptive tuning strategies are demonstrated by modelling the shunt circuit behaviour of the piezoelectric control layer in order to optimise the harvesting piezoelectric layer during operation under input base excitation. In such situations, with proper tuning parameters the system performance can be substantially improved. Moreover, the validation of the closed-form technique is also provided by developing the Ritz method-based weak form analytical approach giving similar results. Finally, the parametric analytical studies have been explored to identify direct and relevant contributions for vibration power harvesting behaviours

BROADBAND VIBRATION CONTROL THROUGH PERIODIC ARRAYS OF LOCALLY RESONANT INCLUSIONS

openDottorato di ricerca in Ingegneria industriale e dell'informazioneopenZientek, Michal Wladysla

Piezoceramic shunted damping concept: testing, modelling and correlation

International audienceNew laboratory tests are presented for the experimental evaluation and assessment of the piezoceramic shunted damping (PSD) concept for cantilever Aluminium thin (long) beams bonded symmetrically on their upper/lower surfaces with single pairs of small piezoceramic patches. Following these tests outcome, the PSD efficiency measure is proposed to be the so-called modal effective electromechanical coupling coefficient, which is post-processed from free-vibrations analyses under short-circuit and open-circuit electrodes of the patches. For this purpose, the tests are numerically modelled, analysed, and correlated using ABAQUS® commercial finite element (FE) code. Good tests/models correlations were reached after FE models electromechanical updating. This is attributed to the refined FE models in the sense that they have considered realistic and desirable features such as, electrodes equipotentiality, piezoceramic patches poling orientations (same/opposite), and the corresponding (parallel/series) electric wiring (connections)

An analytical approach to integral resonant control of second-order systems

Peer reviewedPostprin

Semi-Passive Control Strategy using Piezoceramic Patches in Non Linear Commutation Architecture for Structural-Acoustic Smart Systems

The demands for novel smart damping materials can be summarized in: external power source not required for operation; device not needing to be tuned to a specific frequency; device operation not affected by changes in modal frequency; device suppressing vibration over a number of modes, weight and size minimized; self-contained unit device. This thesis focuses on these points and it shows that the dilemma between active and passive vibration control may be solved with a new approach, implementing a semipassive technique without penalties in terms of robustness and performance. Connecting a shunt circuit to a piezoelectric transducer leads to a simple and low cost vibration controller that is able to efficiently suppress unwanted structural vibrations: this is a way to fulfil the abovementioned demands. The objective of this work is to develop and validate by an experimental campaign a computational tool integrated with finite element Nastran software. An original 4-channel switched shunt control system has been realized using a tachometer device. The control system has been tested first of all on a simple cantilevered beam attaining a max vibrations reduction of 16.2 dB for the first bending mode. Further reference test article consisted of a 10 ply fibreglass laminate plate. A multimodal control has applied within a band range of 700Hz including the first seven modes. A maximum reduction of 16 dB has been found. Further numerical and experimental tests have been planned to extend the ability of the SSC to produce structural-borne sound reduction in acoustic rigid cavities for fluid-structure interaction problems. Numerical sound power radiation of an aluminium plate, controlled by synchronized switch system, compared with the experimental acoustic energy detected in acoustic room, has been planned in the ongoing activities