Efficient Implementation on Low-Cost SoC-FPGAs of TLSv1.2 Protocol with ECC_AES Support for Secure IoT Coordinators

Security management for IoT applications is a critical research field, especially when taking into account the performance variation over the very different IoT devices. In this paper, we present high-performance client/server coordinators on low-cost SoC-FPGA devices for secure IoT data collection. Security is ensured by using the Transport Layer Security (TLS) protocol based on the TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 cipher suite. The hardware architecture of the proposed coordinators is based on SW/HW co-design, implementing within the hardware accelerator core Elliptic Curve Scalar Multiplication (ECSM), which is the core operation of Elliptic Curve Cryptosystems (ECC). Meanwhile, the control of the overall TLS scheme is performed in software by an ARM Cortex-A9 microprocessor. In fact, the implementation of the ECC accelerator core around an ARM microprocessor allows not only the improvement of ECSM execution but also the performance enhancement of the overall cryptosystem. The integration of the ARM processor enables to exploit the possibility of embedded Linux features for high system flexibility. As a result, the proposed ECC accelerator requires limited area, with only 3395 LUTs on the Zynq device used to perform high-speed, 233-bit ECSMs in 413 µs, with a 50 MHz clock. Moreover, the generation of a 384-bit TLS handshake secret key between client and server coordinators requires 67.5 ms on a low cost Zynq 7Z007S device

High Speed and Low Latency ECC Implementation over GF(2m) on FPGA

In this paper, a novel high-speed elliptic curve cryptography (ECC) processor implementation for point multiplication (PM) on field-programmable gate array (FPGA) is proposed. A new segmented pipelined full-precision multiplier is used to reduce the latency, and the Lopez-Dahab Montgomery PM algorithm is modified for careful scheduling to avoid data dependency resulting in a drastic reduction in the number of clock cycles (CCs) required. The proposed ECC architecture has been implemented on Xilinx FPGAs' Virtex4, Virtex5, and Virtex7 families. To the best of our knowledge, our single- and three-multiplier-based designs show the fastest performance to date when compared with reported works individually. Our one-multiplier-based ECC processor also achieves the highest reported speed together with the best reported area-time performance on Virtex4 (5.32 μs at 210 MHz), on Virtex5 (4.91 μs at 228 MHz), and on the more advanced Virtex7 (3.18 μs at 352 MHz). Finally, the proposed three-multiplier-based ECC implementation is the first work reporting the lowest number of CCs and the fastest ECC processor design on FPGA (450 CCs to get 2.83 μs on Virtex7)

Hardware Implementations for Symmetric Key Cryptosystems

The utilization of global communications network for supporting new electronic applications is growing. Many applications provided over the global communications network involve exchange of security-sensitive information between different entities. Often, communicating entities are located at different locations around the globe. This demands deployment of certain mechanisms for providing secure communications channels between these entities. For this purpose, cryptographic algorithms are used by many of today\u27s electronic applications to maintain security. Cryptographic algorithms provide set of primitives for achieving different security goals such as: confidentiality, data integrity, authenticity, and non-repudiation. In general, two main categories of cryptographic algorithms can be used to accomplish any of these security goals, namely, asymmetric key algorithms and symmetric key algorithms. The security of asymmetric key algorithms is based on the hardness of the underlying computational problems, which usually require large overhead of space and time complexities. On the other hand, the security of symmetric key algorithms is based on non-linear transformations and permutations, which provide efficient implementations compared to the asymmetric key ones. Therefore, it is common to use asymmetric key algorithms for key exchange, while symmetric key counterparts are deployed in securing the communications sessions. This thesis focuses on finding efficient hardware implementations for symmetric key cryptosystems targeting mobile communications and resource constrained applications. First, efficient lightweight hardware implementations of two members of the Welch-Gong (WG) family of stream ciphers, the WG$\left(29,11\right)$ and WG-$16$, are considered for the mobile communications domain. Optimizations in the WG$\left(29,11\right)$ stream cipher are considered when the $GF\left(2^{29}\right)$ elements are represented in either the Optimal normal basis type-II (ONB-II) or the Polynomial basis (PB). For WG-$16$, optimizations are considered only for PB representations of the $GF\left(2^{16}\right)$ elements. In this regard, optimizations for both ciphers are accomplished mainly at the arithmetic level through reducing the number of field multipliers, based on novel trace properties. In addition, other optimization techniques such as serialization and pipelining, are also considered. After this, the thesis explores efficient hardware implementations for digit-level multiplication over binary extension fields $GF\left(2^{m}\right)$. Efficient digit-level $GF\left(2^{m}\right)$ multiplications are advantageous for ultra-lightweight implementations, not only in symmetric key algorithms, but also in asymmetric key algorithms. The thesis introduces new architectures for digit-level $GF\left(2^{m}\right)$ multipliers considering the Gaussian normal basis (GNB) and PB representations of the field elements. The new digit-level $GF\left(2^{m}\right)$ single multipliers do not require loading of the two input field elements in advance to computations. This feature results in high throughput fast multiplication in resource constrained applications with limited capacity of input data-paths. The new digit-level $GF\left(2^{m}\right)$ single multipliers are considered for both the GNB and PB. In addition, for the GNB representation, new architectures for digit-level $GF\left(2^{m}\right)$ hybrid-double and hybrid-triple multipliers are introduced. The new digit-level $GF\left(2^{m}\right)$ hybrid-double and hybrid-triple GNB multipliers, respectively, accomplish the multiplication of three and four field elements using the latency required for multiplying two field elements. Furthermore, a new hardware architecture for the eight-ary exponentiation scheme is proposed by utilizing the new digit-level $GF\left(2^{m}\right)$ hybrid-triple GNB multipliers

Efficient implementation of elliptic curve cryptography.

Elliptic Curve Cryptosystems (ECC) were introduced in 1985 by Neal Koblitz and Victor Miller. Small key size made elliptic curve attractive for public key cryptosystem implementation. This thesis introduces solutions of efficient implementation of ECC in algorithmic level and in computation level. In algorithmic level, a fast parallel elliptic curve scalar multiplication algorithm based on a dual-processor hardware system is developed. The method has an average computation time of n3 Elliptic Curve Point Addition on an n-bit scalar. The improvement is n Elliptic Curve Point Doubling compared to conventional methods. When a proper coordinate system and binary representation for the scalar k is used the average execution time will be as low as n Elliptic Curve Point Doubling, which makes this method about two times faster than conventional single processor multipliers using the same coordinate system. In computation level, a high performance elliptic curve processor (ECP) architecture is presented. The processor uses parallelism in finite field calculation to achieve high speed execution of scalar multiplication algorithm. The architecture relies on compile-time detection rather than of run-time detection of parallelism which results in less hardware. Implemented on FPGA, the proposed processor operates at 66MHz in GF(2 167) and performs scalar multiplication in 100muSec, which is considerably faster than recent implementations.Dept. of Electrical and Computer Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis2004 .A57. Source: Masters Abstracts International, Volume: 44-03, page: 1446. Thesis (M.A.Sc.)--University of Windsor (Canada), 2005

Hardware/software optimizations for elliptic curve scalar multiplication on hybrid FPGAs

Elliptic curve cryptography (ECC) offers a viable alternative to Rivest-Shamir-Adleman (RSA) by delivering equivalent security with a smaller key size. This has several advantages, including smaller bandwidth demands, faster key exchange, and lower latency encryption and decryption. The fundamental operation for ECC is scalar point multiplication, wherein a point P on an elliptic curve defined over a finite field is multiplied by a scalar k. The complexity of this operation requires a hardware implementation to achieve high performance. The algorithms involved in scalar point multiplication are constantly evolving, incorporating the latest developments in number theory to improve computation time. These competing needs, high performance and flexibility, have caused previous implementations to either limit their adaptability or to incur performance losses. This thesis explores the use of a hybrid-FPGA for scalar point multiplication. A hybrid- FPGA contains a general purpose processor (GPP) in addition to reconfigurable fabric. This allows for a software/hardware co-design with low latency communication between the GPP and custom hardware. The elliptic curve operations and finite field inversion are programmed in C code. All other finite field arithmetic is implemented in the FPGA hardware, providing higher performance while retaining flexibility. The resulting implementation achieves speedups ranging from 24 times to 55 times faster than an optimized software implementation executing on a Pentium II workstation. The scalability of the design is investigated in two directions: faster finite field multiplication and increased instruction level parallelism exploitation. Increasing the number of parallel arithmetic units beyond two is shown to be less efficient than increasing the speed of the finite field multiplier

Design and analysis of efficient and secure elliptic curve cryptoprocessors

Elliptic Curve Cryptosystems have attracted many researchers and have been included in many standards such as IEEE, ANSI, NIST, SEC and WTLS. The ability to use smaller keys and computationally more efficient algorithms compared with earlier public key cryptosystems such as RSA and ElGamal are two main reasons why elliptic curve cryptosystems are becoming more popular. They are considered to be particularly suitable for implementation on smart cards or mobile devices. Power Analysis Attacks on such devices are considered serious threat due to the physical characteristics of these devices and their use in potentially hostile environments. This dissertation investigates elliptic curve cryptoprocessor architectures for curves defined over GF(2m) fields. In this dissertation, new architectures that are suitable for efficient computation of scalar multiplications with resistance against power analysis attacks are proposed and their performance evaluated. This is achieved by exploiting parallelism and randomized processing techniques. Parallelism and randomization are controlled at different levels to provide more efficiency and security. Furthermore, the proposed architectures are flexible enough to allow designers tailor performance and hardware requirements according to their performance and cost objectives. The proposed architectures have been modeled using VHDL and implemented on FPGA platform