The relevance of outsourcing and leagile strategies in performance optimization of an integrated process planning and scheduling

Over the past few years growing global competition has forced the manufacturing industries to upgrade their old production strategies with the modern day approaches. As a result, recent interest has been developed towards finding an appropriate policy that could enable them to compete with others, and facilitate them to emerge as a market winner. Keeping in mind the abovementioned facts, in this paper the authors have proposed an integrated process planning and scheduling model inheriting the salient features of outsourcing, and leagile principles to compete in the existing market scenario. The paper also proposes a model based on leagile principles, where the integrated planning management has been practiced. In the present work a scheduling problem has been considered and overall minimization of makespan has been aimed. The paper shows the relevance of both the strategies in performance enhancement of the industries, in terms of their reduced makespan. The authors have also proposed a new hybrid Enhanced Swift Converging Simulated Annealing (ESCSA) algorithm, to solve the complex real-time scheduling problems. The proposed algorithm inherits the prominent features of the Genetic Algorithm (GA), Simulated Annealing (SA), and the Fuzzy Logic Controller (FLC). The ESCSA algorithm reduces the makespan significantly in less computational time and number of iterations. The efficacy of the proposed algorithm has been shown by comparing the results with GA, SA, Tabu, and hybrid Tabu-SA optimization methods

Agribusiness supply chain risk management: A review of quantitative decision models

Supply chain risk management is a large and growing field of research. However, within this field, mathematical models for agricultural products have received relatively little attention. This is somewhat surprising as risk management is even more important for agricultural supply chains due to challenges associated with seasonality, supply spikes, long supply lead-times, and perishability. This paper carries out a thorough review of the relatively limited literature on quantitative risk management models for agricultural supply chains. Specifically, we identify robustness and resilience as two key techniques for managing risk. Since these terms are not used consistently in the literature, we propose clear definitions and metrics for these terms; we then use these definitions to classify the agricultural supply chain risk management literature. Implications are given for both practice and future research on agricultural supply chain risk management

Modelling an End to End Supply Chain system Using Simulation

Within the current uncertain environment industries are predominantly faced with various challenges resulting in greater need for skilled management and adequate technique as well as tools to manage Supply Chains (SC) efficiently. Derived from this observation is the need to develop a generic/reusable modelling framework that would allow firms to analyse their operational performance over time (Mackulak and Lawrence 1998, Beamon and Chen 2001, Petrovic 2001, Lau et al. 2008, Khilwani et al. 2011, Cigollini et al. 2014). However for this to be effectively managed the simulation modelling efforts should be directed towards identifying the scope of the SC and the key processes performed between players. Purpose: The research attempts to analyse trends in the field of supply chain modelling using simulation and provide directions for future research by reviewing existing Operations Research/Operations Management (OR/OM) literature. Structural and operational complexities as well as different business processes within various industries are often limiting factors during modelling efforts. Successively, this calls for the end to end (E2E) SC modelling framework where the generic processes, related policies and techniques could be captured and supported by the powerful capabilities of simulation. Research Approach: Following Mitroff’s (1974) scientific inquiry model and Sargent (2011) this research will adopt simulation methodology and focus on systematic literature review in order to establish generic OR processes and differentiate them from those which are specific to certain industries. The aim of the research is provide a clear and informed overview of the existing literature in the area of supply chain simulation. Therefore through a profound examination of the selected studies a conceptual model will be design based on the selection of the most commonly used SC Processes and simulation techniques used within those processes. The description of individual elements that make up SC processes (Hermann and Pundoor 2006) will be defined using building blocks, which are also known as Process Categories. Findings and Originality: This paper presents an E2E SC simulation conceptual model realised through means of systematic literature review. Practitioners have adopted the term E2E SC while this is not extensively featured within academic literature. The existing SC studies lack generality in regards to capturing the entire SC within one methodological framework, which this study aims to address. Research Impact: A systematic review of the supply chain and simulation literature takes an integrated and holistic assessment of an E2E SC, from market-demand scenarios through order management and planning processes, and on to manufacturing and physical distribution. Thus by providing significant advances in understanding of the theory, methods used and applicability of supply chain simulation, this paper will further develop a body of knowledge within this subject area. Practical Impact: The paper will empower practitioners’ knowledge and understanding of the supply chain processes characteristics that can be modelled using simulation. Moreover it will facilitate a selection of specific data required for the simulation in accordance to the individual needs of the industry

Evaluation of sales and operations planning in a process industry

Cette thèse porte sur la planification des ventes et des opérations (S±&OP) dans une chaîne d'approvisionnements axée sur la demande. L'objectif de la S±&OP, dans un tel contexte, est de tirer profit de l'alignement de la demande des clients avec la capacité de la chaîne d'approvisionnement par la coordination de la planification des ventes, de la production, de la distribution et de l'approvisionnement. Un tel processus de planification exige une collaboration multifonctionnelle profonde ainsi que l'intégration de la planification. Le but étant d'anticiper l'impact des décisions de vente sur les performances de la chaîne logistique , alors que l'influence de la dynamique des marchés est prise en compte pour les décisions concernant la production, la distribution et l'approvisionnement. La recherche a été menée dans un environnement logistique manufacturier multi-site et multi-produit, avec un approvisionnement et des ventes régis par des contrats ou le marché. Cette thèse examine deux approches de S±&OP et fournit un support à la décision pour l'implantation de ces méthodes dans une chaîne logistique multi-site de fabrication sur commande. Dans cette thèse, une planification traditionnelle des ventes et de la production basée sur la S±feOP et une planification S±fcOP plus avancée de la chaîne logistique sont tout d'abord caractérisées. Dans le système de chaîne logistique manufacturière multi-site, nous définissons la S±&OP traditionnelle comme un système dans lequel la planification des ventes et de la production est effectuée conjointement et centralement, tandis que la planification de la distribution et de l'approvisionnement est effectuée séparément et localement à chaque emplacement. D'autre part, la S±fcOP avancée de la chaîne logistique consiste en la planification des ventes, de la production, de la distribution et de l'approvisionnement d'une chaîne d'approvisionnement effectuée conjointement et centralement. Basés sur cette classification, des modèles de programmation en nombres entiers et des modèles de simulation sur un horizon roulant sont développés, représentant, respectivement, les approches de S±&OP traditionnelle et avancée, et également, une planification découplée traditionnelle, dans laquelle la planification des ventes est effectuée centralement et la planification de la production, la distribution et l'approvisionnement est effectuée séparément et localement par les unités d'affaires. La validation des modèles et l'évaluation pré-implantation sont effectuées à l'aide d'un cas industriel réel utilisant les données d'une compagnie de panneaux de lamelles orientées. Les résultats obtenus démontrent que les deux méthodes de S±feOP (traditionnelle et avancée) offrent une performance significativement supérieure à celle de la planification découplée, avec des bénéfices prévus supérieurs de 3,5% et 4,5%, respectivement. Les résultats sont très sensibles aux conditions de marché. Lorsque les prix du marché descendent ou que la demande augmente, de plus grands bénéfices peuvent être réalisés. Dans le cadre de cette recherche, les décisions de vente impliquent des ventes régies par des contrats et le marché. Les décisions de contrat non optimales affectent non seulement les revenus, mais également la performance manufacturière et logistique et les décisions de contrats d'approvisionnement en matière première. Le grand défi est de concevoir et d'offrir les bonnes politiques de contrat aux bons clients de sorte que la satisfaction des clients soit garantie et que l'attribution de la capacité de la compagnie soit optimisée. Également, il faut choisir les bons contrats des bons fournisseurs, de sorte que les approvisionnements en matière première soient garantis et que les objectifs financiers de la compagnie soient atteints. Dans cette thèse, un modèle coordonné d'aide à la décision pour les contrats e développé afin de fournir une aide à l'intégration de la conception de contrats, de l'attribution de capacité et des décisions de contrats d'approvisionnement pour une chaîne logistique multi-site à trois niveaux. En utilisant la programmation stochastique à deux étapes avec recours, les incertitudes liées à l'environnement et au système sont anticipées et des décisions robustes peuvent être obtenues. Les résultats informatiques montrent que l'approche de modélisation proposée fournit des solutions de contrats plus réalistes et plus robustes, avec une performance prévue supérieure d'environ 12% aux solutions fournies par un modèle déterministe

Maximising the value of supply chain finance

Supply Chain Finance (SCF) arrangements aim to add value by taking a cooperative approach to financing the supply chain. Interest in SCF has been increasing, and decision makers need a comprehensive view of possible applications and their potential. By means of theoretical and empirical exploration, we develop a conceptual framework that allows for positioning of SCF concepts and practices. The framework is based on a delineation of four archetypal SCF policies and the criteria that are relevant for adoption of each policy. The two main contributions of our framework are: (1) it explicitly considers operational motives as well as the financial motives that could prompt a firm to engage financial cooperation; and (2) it uses a discounted cash flow approach to illustrate the trade-offs that arise from different risks in SCF implementations. We use the framework to review policies that have been used in reverse factoring, an SCF practice that has recently become popular. Our study reveals implications for all the parties involved in an SCF implementation

Production planning and control of closed-loop supply chains

More and more supply chains emerge that include a return flow of materials. Many original equipment manufacturers are nowadays engaged in the remanufacturing business. In many process industries, production defectives and by-products are reworked. These closed-loop supply chains deserve special attention. Production planning and control in such hybrid systems is a real challenge, especially due to increased uncertainties. Even companies that are engaged in remanufacturing operations only, face more complicated planning situations than traditional manufacturing companies.We point out the main complicating characteristics in closed-loop systems with both remanufacturing and rework, and indicated the need for new or modified/extended production planning and control approaches. An overview of the existing scientific contributions is given. It appears that we only stand at the beginning of this line of research, and that many more contributions are needed and expected in the future.closed-loop supply chains;Production planning and control