WEHST: Wearable Engine for Human-Mediated Telepresence

This dissertation reports on the industrial design of a wearable computational device created to enable better emergency medical intervention for situations where electronic remote assistance is necessary. The design created for this doctoral project, which assists practices by paramedics with mandates for search-and-rescue (SAR) in hazardous environments, contributes to the field of human-mediated teleparamedicine (HMTPM). Ethnographic and industrial design aspects of this research considered the intricate relationships at play in search-and-rescue operations, which lead to the design of the system created for this project known as WEHST: Wearable Engine for Human-Mediated Telepresence. Three case studies of different teams were carried out, each focusing on making improvements to the practices of teams of paramedics and search-and-rescue technicians who use combinations of ambulance, airplane, and helicopter transport in specific chemical, biological, radioactive, nuclear and explosive (CBRNE) scenarios. The three paramedicine groups included are the Canadian Air Force 442 Rescue Squadron, Nelson Search and Rescue, and the British Columbia Ambulance Service Infant Transport Team. Data was gathered over a seven-year period through a variety of methods including observation, interviews, examination of documents, and industrial design. The data collected included physiological, social, technical, and ecological information about the rescuers. Actor-network theory guided the research design, data analysis, and design synthesis. All of this leads to the creation of the WEHST system. As identified, the WEHST design created in this dissertation project addresses the difficulty case-study participants found in using their radios in hazardous settings. As the research identified, a means of controlling these radios without depending on hands, voice, or speech would greatly improve communication, as would wearing sensors and other computing resources better linking operators, radios, and environments. WEHST responds to this need. WEHST is an instance of industrial design for a wearable “engine” for human-situated telepresence that includes eight interoperable families of wearable electronic modules and accompanying textiles. These make up a platform technology for modular, scalable and adaptable toolsets for field practice, pedagogy, or research. This document details the considerations that went into the creation of the WEHST design

A Periodic Transmission Line Model for Body Channel Communication

Body channel communication (BCC) is a technique for data transmission exploiting the human body as communication channel. Even though it was pioneered about 25 years ago, the identification of a good electrical model behind its functioning is still an open research question. The proposed distributed model can then serve as a supporting tool for the design, allowing to enhance the performances of any BCC system. A novel finite periodic transmission line model was developed to describe the human body as transmission medium. According to this model, for the first time, the parasitic capacitance between the transmitter and the receiver is assumed to depend on their distance. The parameters related to the body and electrodes are acquired experimentally by fitting the bio-impedentiometric measurements, in the range of frequencies from 1 kHz to 1 MHz, obtaining a mean absolute error lower than 4° and 30Ω for the phase angle and impedance modulus, respectively. The proposed mathematical framework has been successfully validated by describing a ground-referred and low-complexity system called Live Wire, suitable as supporting tool for visually impaired people, and finding good agreement between the measured and the calculated data, marking a ±3% error for communication distances ranging from 20 to 150 cm. In this work we introduced a new circuital approach, for capacitive-coupling systems, based on finite periodic transmission line, capable to describe and model BCC systems allowing to optimize the performances of similar systems

A Periodic Transmission Line Model for Body Channel Communication

Body channel communication (BCC) is a technique for data transmission exploiting the human body as communication channel. Even though it was pioneered about 25 years ago, the identification of a good electrical model behind its functioning is still an open research question. The proposed distributed model can then serve as a supporting tool for the design, allowing to enhance the performances of any BCC system. A novel finite periodic transmission line model was developed to describe the human body as transmission medium. According to this model, for the first time, the parasitic capacitance between the transmitter and the receiver is assumed to depend on their distance. The parameters related to the body and electrodes are acquired experimentally by fitting the bio-impedentiometric measurements, in the range of frequencies from 1 kHz to 1 MHz, obtaining a mean absolute error lower than 4° and 30 $Omega$ for the phase angle and impedance modulus, respectively. The proposed mathematical framework has been successfully validated by describing a ground-referred and low-complexity system called Live Wire, suitable as supporting tool for visually impaired people, and finding good agreement between the measured and the calculated data, marking a ±3% error for communication distances ranging from 20 to 150 cm. In this work we introduced a new circuital approach, for capacitive-coupling systems, based on finite periodic transmission line, capable to describe and model BCC systems allowing to optimize the performances of similar systems

Cyber-Human Systems, Space Technologies, and Threats

CYBER-HUMAN SYSTEMS, SPACE TECHNOLOGIES, AND THREATS is our eighth textbook in a series covering the world of UASs / CUAS/ UUVs / SPACE. Other textbooks in our series are Space Systems Emerging Technologies and Operations; Drone Delivery of CBNRECy – DEW Weapons: Emerging Threats of Mini-Weapons of Mass Destruction and Disruption (WMDD); Disruptive Technologies with applications in Airline, Marine, Defense Industries; Unmanned Vehicle Systems & Operations On Air, Sea, Land; Counter Unmanned Aircraft Systems Technologies and Operations; Unmanned Aircraft Systems in the Cyber Domain: Protecting USA’s Advanced Air Assets, 2nd edition; and Unmanned Aircraft Systems (UAS) in the Cyber Domain Protecting USA’s Advanced Air Assets, 1st edition. Our previous seven titles have received considerable global recognition in the field. (Nichols & Carter, 2022) (Nichols, et al., 2021) (Nichols R. K., et al., 2020) (Nichols R. , et al., 2020) (Nichols R. , et al., 2019) (Nichols R. K., 2018) (Nichols R. K., et al., 2022)https://newprairiepress.org/ebooks/1052/thumbnail.jp

Impact of Ear Occlusion on In-Ear Sounds Generated by Intra-oral Behaviors

We conducted a case study with one volunteer and a recording setup to detect sounds induced by the actions: jaw clenching, tooth grinding, reading, eating, and drinking. The setup consisted of two in-ear microphones, where the left ear was semi-occluded with a commercially available earpiece and the right ear was occluded with a mouldable silicon ear piece. Investigations in the time and frequency domains demonstrated that for behaviors such as eating, tooth grinding, and reading, sounds could be recorded with both sensors. For jaw clenching, however, occluding the ear with a mouldable piece was necessary to enable its detection. This can be attributed to the fact that the mouldable ear piece sealed the ear canal and isolated it from the environment, resulting in a detectable change in pressure. In conclusion, our work suggests that detecting behaviors such as eating, grinding, reading with a semi-occluded ear is possible, whereas, behaviors such as clenching require the complete occlusion of the ear if the activity should be easily detectable. Nevertheless, the latter approach may limit real-world applicability because it hinders the hearing capabilities.</p

Une méthode de mesure du mouvement humain pour la programmation par démonstration

Programming by demonstration (PbD) is an intuitive approach to impart a task to a robot from one or several demonstrations by the human teacher. The acquisition of the demonstrations involves the solution of the correspondence problem when the teacher and the learner differ in sensing and actuation. Kinesthetic guidance is widely used to perform demonstrations. With such a method, the robot is manipulated by the teacher and the demonstrations are recorded by the robot's encoders. In this way, the correspondence problem is trivial but the teacher dexterity is afflicted which may impact the PbD process. Methods that are more practical for the teacher usually require the identification of some mappings to solve the correspondence problem. The demonstration acquisition method is based on a compromise between the difficulty of identifying these mappings, the level of accuracy of the recorded elements and the user-friendliness and convenience for the teacher. This thesis proposes an inertial human motion tracking method based on inertial measurement units (IMUs) for PbD for pick-and-place tasks. Compared to kinesthetic guidance, IMUs are convenient and easy to use but can present a limited accuracy. Their potential for PbD applications is investigated. To estimate the trajectory of the teacher's hand, 3 IMUs are placed on her/his arm segments (arm, forearm and hand) to estimate their orientations. A specific method is proposed to partially compensate the well-known drift of the sensor orientation estimation around the gravity direction by exploiting the particular configuration of the demonstration. This method, called heading reset, is based on the assumption that the sensor passes through its original heading with stationary phases several times during the demonstration. The heading reset is implemented in an integration and vector observation algorithm. Several experiments illustrate the advantages of this heading reset. A comprehensive inertial human hand motion tracking (IHMT) method for PbD is then developed. It includes an initialization procedure to estimate the orientation of each sensor with respect to the human arm segment and the initial orientation of the sensor with respect to the teacher attached frame. The procedure involves a rotation and a static position of the extended arm. The measurement system is thus robust with respect to the positioning of the sensors on the segments. A procedure for estimating the position of the human teacher relative to the robot and a calibration procedure for the parameters of the method are also proposed. At the end, the error of the human hand trajectory is measured experimentally and is found in an interval between $28.5$ mm and $61.8$ mm. The mappings to solve the correspondence problem are identified. Unfortunately, the observed level of accuracy of this IHMT method is not sufficient for a PbD process. In order to reach the necessary level of accuracy, a method is proposed to correct the hand trajectory obtained by IHMT using vision data. A vision system presents a certain complementarity with inertial sensors. For the sake of simplicity and robustness, the vision system only tracks the objects but not the teacher. The correction is based on so-called Positions Of Interest (POIs) and involves 3 steps: the identification of the POIs in the inertial and vision data, the pairing of the hand POIs to objects POIs that correspond to the same action in the task, and finally, the correction of the hand trajectory based on the pairs of POIs. The complete method for demonstration acquisition is experimentally evaluated in a full PbD process. This experiment reveals the advantages of the proposed method over kinesthesy in the context of this work.La programmation par démonstration est une approche intuitive permettant de transmettre une tâche à un robot à partir d'une ou plusieurs démonstrations faites par un enseignant humain. L'acquisition des démonstrations nécessite cependant la résolution d'un problème de correspondance quand les systèmes sensitifs et moteurs de l'enseignant et de l'apprenant diffèrent. De nombreux travaux utilisent des démonstrations faites par kinesthésie, i.e., l'enseignant manipule directement le robot pour lui faire faire la tâche. Ce dernier enregistre ses mouvements grâce à ses propres encodeurs. De cette façon, le problème de correspondance est trivial. Lors de telles démonstrations, la dextérité de l'enseignant peut être altérée et impacter tout le processus de programmation par démonstration. Les méthodes d'acquisition de démonstration moins invalidantes pour l'enseignant nécessitent souvent des procédures spécifiques pour résoudre le problème de correspondance. Ainsi l'acquisition des démonstrations se base sur un compromis entre complexité de ces procédures, le niveau de précision des éléments enregistrés et la commodité pour l'enseignant. Cette thèse propose ainsi une méthode de mesure du mouvement humain par capteurs inertiels pour la programmation par démonstration de tâches de ``pick-and-place''. Les capteurs inertiels sont en effet pratiques et faciles à utiliser, mais sont d'une précision limitée. Nous étudions leur potentiel pour la programmation par démonstration. Pour estimer la trajectoire de la main de l'enseignant, des capteurs inertiels sont placés sur son bras, son avant-bras et sa main afin d'estimer leurs orientations. Une méthode est proposée afin de compenser partiellement la dérive de l'estimation de l'orientation des capteurs autour de la direction de la gravité. Cette méthode, appelée ``heading reset'', est basée sur l'hypothèse que le capteur passe plusieurs fois par son azimut initial avec des phases stationnaires lors d'une démonstration. Cette méthode est implémentée dans un algorithme d'intégration et d'observation de vecteur. Des expériences illustrent les avantages du ``heading reset''. Cette thèse développe ensuite une méthode complète de mesure des mouvements de la main humaine par capteurs inertiels (IHMT). Elle comprend une première procédure d'initialisation pour estimer l'orientation des capteurs par rapport aux segments du bras humain ainsi que l'orientation initiale des capteurs par rapport au repère de référence de l'humain. Cette procédure, consistant en une rotation et une position statique du bras tendu, est robuste au positionnement des capteurs. Une seconde procédure est proposée pour estimer la position de l'humain par rapport au robot et pour calibrer les paramètres de la méthode. Finalement, l'erreur moyenne sur la trajectoire de la main humaine est mesurée expérimentalement entre 28.5 mm et 61.8 mm, ce qui n'est cependant pas suffisant pour la programmation par démonstration. Afin d'atteindre le niveau de précision nécessaire, une nouvelle méthode est développée afin de corriger la trajectoire de la main par IHMT à partir de données issues d'un système de vision, complémentaire des capteurs inertiels. Pour maintenir une certaine simplicité et robustesse, le système de vision ne suit que les objets et pas l'enseignant. La méthode de correction, basée sur des ``Positions Of Interest (POIs)'', est constituée de 3 étapes: l'identification des POIs dans les données issues des capteurs inertiels et du système de vision, puis l'association de POIs liées à la main et de POIs liées aux objets correspondant à la même action, et enfin, la correction de la trajectoire de la main à partir des paires de POIs. Finalement, la méthode IHMT corrigée est expérimentalement évaluée dans un processus complet de programmation par démonstration. Cette expérience montre l'avantage de la méthode proposée sur la kinesthésie dans le contexte de ce travail

An Evaluation Schema for the Ethical Use of Autonomous Robotic Systems in Security Applications

We propose a multi-step evaluation schema designed to help procurement agencies and others to examine the ethical dimensions of autonomous systems to be applied in the security sector, including autonomous weapons systems

Balancing User Experience for Mobile One-to-One Interpersonal Telepresence

The COVID-19 virus disrupted all aspects of our daily lives, and though the world is finally returning to normalcy, the pandemic has shown us how ill-prepared we are to support social interactions when expected to remain socially distant. Family members missed major life events of their loved ones; face-to-face interactions were replaced with video chat; and the technologies used to facilitate interim social interactions caused an increase in depression, stress, and burn-out. It is clear that we need better solutions to address these issues, and one avenue showing promise is that of Interpersonal Telepresence. Interpersonal Telepresence is an interaction paradigm in which two people can share mobile experiences and feel as if they are together, even though geographically distributed. In this dissertation, we posit that this paradigm has significant value in one-to-one, asymmetrical contexts, where one user can live-stream their experiences to another who remains at home. We discuss a review of the recent Interpersonal Telepresence literature, highlighting research trends and opportunities that require further examination. Specifically, we show how current telepresence prototypes do not meet the social needs of the streamer, who often feels socially awkward when using obtrusive devices. To combat this negative finding, we present a qualitative co-design study in which end users worked together to design their ideal telepresence systems, overcoming value tensions that naturally arise between Viewer and Streamer. Expectedly, virtual reality techniques are desired to provide immersive views of the remote location; however, our participants noted that the devices to facilitate this interaction need to be hidden from the public eye. This suggests that 360$^\circ$ cameras should be used, but the lenses need to be embedded in wearable systems, which might affect the viewing experience. We thus present two quantitative studies in which we examine the effects of camera placement and height on the viewing experience, in an effort to understand how we can better design telepresence systems. We found that camera height is not a significant factor, meaning wearable cameras do not need to be positioned at the natural eye-level of the viewer; the streamer is able to place them according to their own needs. Lastly, we present a qualitative study in which we deploy a custom interpersonal telepresence prototype on the co-design findings. Our participants preferred our prototype instead of simple video chat, even though it caused a somewhat increased sense of self-consciousness. Our participants indicated that they have their own preferences, even with simple design decisions such as style of hat, and we as a community need to consider ways to allow customization within our devices. Overall, our work contributes new knowledge to the telepresence field and helps system designers focus on the features that truly matter to users, in an effort to let people have richer experiences and virtually bridge the distance to their loved ones

Advanced Mobile Robotics: Volume 3

Mobile robotics is a challenging field with great potential. It covers disciplines including electrical engineering, mechanical engineering, computer science, cognitive science, and social science. It is essential to the design of automated robots, in combination with artificial intelligence, vision, and sensor technologies. Mobile robots are widely used for surveillance, guidance, transportation and entertainment tasks, as well as medical applications. This Special Issue intends to concentrate on recent developments concerning mobile robots and the research surrounding them to enhance studies on the fundamental problems observed in the robots. Various multidisciplinary approaches and integrative contributions including navigation, learning and adaptation, networked system, biologically inspired robots and cognitive methods are welcome contributions to this Special Issue, both from a research and an application perspective