Ultra-Low Power Circuit Design for Cubic-Millimeter Wireless Sensor Platform.

Modern daily life is surrounded by smaller and smaller computing devices. As Bell’s Law predicts, the research community is now looking at tiny computing platforms and mm3-scale sensor systems are drawing an increasing amount of attention since they can create a whole new computing environment. Designing mm3-scale sensor nodes raises various circuit and system level challenges and we have addressed and proposed novel solutions for many of these challenges to create the first complete 1.0mm3 sensor system including a commercial microprocessor. We demonstrate a 1.0mm3 form factor sensor whose modular die-stacked structure allows maximum volume utilization. Low power I2C communication enables inter-layer serial communication without losing compatibility to standard I2C communication protocol. A dual microprocessor enables concurrent computation for the sensor node control and measurement data processing. A multi-modal power management unit allowed energy harvesting from various harvesting sources. An optical communication scheme is provided for initial programming, synchronization and re-programming after recovery from battery discharge. Standby power reduction techniques are investigated and a super cut-off power gating scheme with an ultra-low power charge pump reduces the standby power of logic circuits by 2-19× and memory by 30%. Different approaches for designing low-power memory for mm3-scale sensor nodes are also presented in this work. A dual threshold voltage gain cell eDRAM design achieves the lowest eDRAM retention power and a 7T SRAM design based on hetero-junction tunneling transistors reduces the standby power of SRAM by 9-19× with only 15% area overhead. We have paid special attention to the timer for the mm3-scale sensor systems and propose a multi-stage gate-leakage-based timer to limit the standard deviation of the error in hourly measurement to 196ms and a temperature compensation scheme reduces temperature dependency to 31ppm/°C. These techniques for designing ultra-low power circuits for a mm3-scale sensor enable implementation of a 1.0mm3 sensor node, which can be used as a skeleton for future micro-sensor systems in variety of applications. These microsystems imply the continuation of the Bell’s Law, which also predicts the massive deployment of mm3-scale computing systems and emergence of even smaller and more powerful computing systems in the near future.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/91438/1/sori_1.pd

Ultra-low-power SRAM design in high variability advanced CMOS

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2009.Cataloged from PDF version of thesis.Includes bibliographical references (p. 163-181).Embedded SRAMs are a critical component in modern digital systems, and their role is preferentially increasing. As a result, SRAMs strongly impact the overall power, performance, and area, and, in order to manage these severely constrained trade-offs, they must be specially designed for target applications. Highly energy-constrained systems (e.g. implantable biomedical devices, multimedia handsets, etc.) are an important class of applications driving ultra-low-power SRAMs. This thesis analyzes the energy of an SRAM sub-array. Since supply- and threshold-voltage have a strong effect, targets for these are established in order to optimize energy. Despite the heavy emphasis on leakage-energy, analysis of a high-density 256x256 sub-array in 45nm LP CMOS points to two necessary optimizations: (1) aggressive supply-voltage reduction (in addition to Vt elevation), and (2) performance enhancement. Important SRAM metrics, including read/write/hold-margin and read-current, are also investigated to identify trade-offs of these optimizations. Based on the need to lower supply-voltage, a 0.35V 256kb SRAM is demonstrated in 65nm LP CMOS. It uses an 8T bit-cell with peripheral circuit-assists to improve write-margin and bit-line leakage. Additionally, redundancy, to manage the increasing impact of variability in the periphery, is proposed to improve the area-offset trade-off of sense-amplifiers, demonstrating promise for highly advanced technology nodes. Based on the need to improve performance, which is limited by density constraints, a 64kb SRAM, using an offset-compensating sense-amplifier, is demonstrated in 45nm LP CMOS with high-density 0.25[mu]m2 bit-cells.(cont.) The sense-amplifier is regenerative, but non -strobed, overcoming timing uncertainties limiting performance, and it is single-ended, for compatibility with 8T cells. Compared to a conventional strobed sense-amplifier, it achieves 34% improvement in worst-case access-time and 4x improvement in the standard deviation of the access-time.by Naveen Verma.Ph.D

Power Management and SRAM for Energy-Autonomous and Low-Power Systems

We demonstrate the two first-known, complete, self-powered millimeter-scale computer systems. These microsystems achieve zero-net-energy operation using solar energy harvesting and ultra-low-power circuits. A medical implant for monitoring intraocular pressure (IOP) is presented as part of a treatment for glaucoma. The 1.5mm3 IOP monitor is easily implantable because of its small size and measures IOP with 0.5mmHg accuracy. It wirelessly transmits data to an external wand while consuming 4.7nJ/bit. This provides rapid feedback about treatment efficacies to decrease physician response time and potentially prevent unnecessary vision loss. A nearly-perpetual temperature sensor is presented that processes data using a 2.1μW near-threshold ARM°R Cortex- M3TM μP that provides a widely-used and trusted programming platform. Energy harvesting and power management techniques for these two microsystems enable energy-autonomous operation. The IOP monitor harvests 80nW of solar power while consuming only 5.3nW, extending lifetime indefinitely. This allows the device to provide medical information for extended periods of time, giving doctors time to converge upon the best glaucoma treatment. The temperature sensor uses on-demand power delivery to improve low-load dc-dc voltage conversion efficiency by 4.75x. It also performs linear regulation to deliver power with low noise, improved load regulation, and tight line regulation. Low-power high-throughput SRAM techniques help millimeter-scale microsystems meet stringent power budgets. VDD scaling in memory decreases energy per access, but also decreases stability margins. These margins can be improved using sizing, VTH selection, and assist circuits, as well as new bitcell designs. Adaptive Crosshairs modulation of SRAM power supplies fixes 70% of parametric failures. Half-differential SRAM design improves stability, reducing VMIN by 72mV. The circuit techniques for energy autonomy presented in this dissertation enable millimeter-scale microsystems for medical implants, such as blood pressure and glucose sensors, as well as non-medical applications, such as supply chain and infrastructure monitoring. These pervasive sensors represent the continuation of Bell’s Law, which accurately traces the evolution of computers as they become smaller, more numerous, and more powerful. The development of millimeter-scale massively-deployed ubiquitous computers ensures the continued expansion and profitability of the semiconductor industry. NanoWatt circuit techniques will allow us to meet this next frontier in IC design.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/86387/1/grgkchen_1.pd

Low-power and application-specific SRAM design for energy-efficient motion estimation

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2012.Cataloged from PDF version of thesis.Includes bibliographical references (p. 181-189).Video content is expected to account for 70% of total mobile data traffic in 2015. High efficiency video coding, in this context, is crucial for lowering the transmission and storage costs for portable electronics. However, modern video coding standards impose a large hardware complexity. Hence, energy-efficiency of these hardware blocks is becoming more critical than ever before for mobile devices. SRAMs are critical components in almost all SoCs affecting the overall energy-efficiency. This thesis focuses on algorithm and architecture development as well as low-power and application-specific SRAM design targeting motion estimation. First, a motion estimation design is considered for the next generation video standard, HEVC. Hardware cost and coding efficiency trade-offs are quantified and an optimum design choice between hardware complexity and coding efficiency is proposed. Hardware-efficient search algorithm, shared search range across CU engines and pixel pre-fetching algorithms provide 4.3x area, 56x on-chip bandwidth and 151 x off-chip bandwidth reduction. Second, a highly-parallel motion estimation design targeting ultra-low voltage operation and supporting AVC/H.264 and VC-1 standards are considered. Hardware reconfigurability along with frame and macro-block parallel processing are implemented for this engine to maximize hardware sharing between multiple standards and to meet throughput constraints. Third, in the context of low-power SRAMs, a 6T and an 8T SRAM are designed in 28nm and 45nm CMOS technologies targeting low voltage operation. The 6T design achieves operation down to 0.6V and the 8T design achieves operation down to 0.5V providing ~ 2.8x and ~ 4.8x reduction in energy/access respectively. Finally, an application-specific SRAM design targeted for motion estimation is developed. Utilizing the correlation of pixel data to reduce bit-line switching activity, this SRAM achieves up to 1.9x energy savings compared to a similar conventional 8T design. These savings demonstrate that application-specific SRAM design can introduce a new dimension and can be combined with voltage scaling to maximize energy-efficiency.by Mahmut Ersin Sinangil.Ph.D

Novel High Performance Ultra Low Power Static Random Access Memories (SRAMs) Based on Next Generation Technologies

Title from PDF of title page viewed January 27, 2021Dissertation advisor: Masud H. ChowdhuryVitaIncludes bibliographical references (page 107-120)Thesis (Ph.D.)--School of Computing and Engineering. University of Missouri--Kansas City, 2019Next Big Thing Is Surely Small: Nanotechnology Can Bring Revolution. Nanotechnology leads the world towards many new applications in various fields of computing, communication, defense, entertainment, medical, renewable energy and environment. These nanotechnology applications require an energy-efficient memory system to compute and process. Among all the memories, Static Random Access Memories (SRAMs) are high performance memories and occupies more than 50% of any design area. Therefore, it is critical to design high performance and energy-efficient SRAM design. Ultra low power and high speed applications require a new generation memory capable of operating at low power as well as low execution time. In this thesis, a novel 8T SRAM design is proposed that offers significantly faster access time and lowers energy consumption along with better read stability and write ability. The proposed design can be used in the conventional SRAM as well as in computationally intensive applications like neural networks and machine learning classifiers [1]-[4]. Novel 8T SRAM design offers higher energy efficiency, reliability, robustness and performance compared to the standard 6T and other existing 8T and 9T designs. It offers the advantages of a 10T SRAM without the additional area, delay and power overheads of the 10T SRAM. The proposed 8T SRAM would be able to overcome many other limitations of the conventional 6T and other 7T, 8T and 9T designs. The design employs single bitline for the write operation, therefore the number of write drivers are reduced. The defining feature of the proposed 8T SRAM is its hybrid design, which is the combination of two techniques: (i) the utilization of single-ended bitline and (ii) the utilization of virtual ground. The single-ended bitline technique ensures separate read and write operations, which eventually reduces the delay and power consumption during the read and write operations. It's independent read and write paths allow the use of the minimum sized access transistors and aid in a disturb-free read operation. The virtual ground weakens the positive feedback in the SRAM cell and improves its write ability. The virtual ground technique is also used to reduce leakages. The proposed design does not require precharging the bitlines for the read operation, which reduces the area and power overheads of the memory system by eliminating the precharging circuit. The design isolates the storage node from the read path, which improves the read stability. For reliability study, we have investigated the static noise margin (SNM) of the proposed 8T SRAM, for which, we have used two methods – (i) the traditional SNM method with the butterfly curve, (ii) the N-curve method A comparative analysis is performed between the proposed and the existing SRAM designs in terms of area, total power consumption during the read and write operations, and stability and reliability. All these advantages make the proposed 8T SRAM design an ideal candidate for the conventional and computationally intensive applications like machine learning classifier and deep learning neural network. In addition to this, there is need for next generation technologies to design SRAM memory because the conventional CMOS technology is approaching its physical and performance boundaries and as a consequence, becoming incompatible with ultra-low-power applications. Emerging devices such as Tunnel Field Effect Transistor (TFET)) and Graphene Nanoribbon Field Effect Transistor (GNRFET) devices are highly potential candidates to overcome the limitations of MOSFET because of their ability to achieve subthreshold slopes below 60 mV/decade and very low leakage currents [6]-[9]. This research also explores novel TFET and GNRFET based 6T SRAM. The thesis evaluates the standby leakage power in the Tunnel FET (TFET) based 6T SRAM cell for different pull-up, pull-down, and pass-gate transistors ratios (PU: PD: PG) and compared to 10nm FinFET based 6T SRAM designs. It is observed that the 10nm TFET based SRAMs have 107.57%, 163.64%, and 140.44% less standby leakage power compared to the 10nm FinFET based SRAMs when the PU: PD: PG ratios are 1:1:1, 1:5:2 and 2:5:2, respectively. The thesis also presents an analysis of the stability and reliability of sub-10nm TFET based 6T SRAM circuit with a reduced supply voltage of 500mV. The static noise margin (SNM), which is a critical measure of SRAM stability and reliability, is determined for hold, read and write operations of the 6T TFET SRAM cell. The robustness of the optimized TFET based 6T SRAM circuit is also evaluated at different supply voltages. Simulations were done in HSPICE and Cadence tools. From the analysis, it is clear that the main advantage of the TFET based SRAM would be the significant improvement in terms of leakage or standby power consumption. Compared to the FinFET based SRAM the standby leakage power of the T-SRAMs are 107.57%, 163.64%, and 140.44% less for 1:1:1, 1:5:2 and 2:5:2 configurations, respectively. Since leakage/standby power is the primary source of power consumption in the SRAM, and the overall system energy efficiency depends on SRAM power consumption, TFET based SRAM would lead to massive improvement of the energy efficiency of the system. Therefore, T-SRAMs are more suitable for ultra-low power applications. In addition to this, the thesis evaluates the standby leakage power of types of Graphene Nanoribbon FETs based 6T SRAM bitcell and compared to 10nm FinFET based 6T SRAM bitcell. It is observed that the 10nm MOS type GNRFET based SRAMs have 16.43 times less standby leakage power compared to the 10nm FinFET based SRAMs. The double gate SB-GNRFET based SRAM consumes 1.35E+03 times less energy compared to the 10nm FinFET based SRAM during write. However, during read double gate SB-GNRFET based SRAM consume 15 times more energy than FinFET based SRAM. It is also observed that GNRFET based SRAMs are more stable and reliable than FinFET based SRAM.Introduction -- Background -- Novel High Performance Ultra Low Power SRAM Design -- Tunnel FET Based SRAM Design -- Graphene Nanoribbon FET Based SRAM Design -- Double-gate FDSOI Based SRAM Designs -- Novel CNTFET and MEMRISTOR Based Digital Designs -- Conclusio

Reliability in the face of variability in nanometer embedded memories

In this thesis, we have investigated the impact of parametric variations on the behaviour of one performance-critical processor structure - embedded memories. As variations manifest as a spread in power and performance, as a first step, we propose a novel modeling methodology that helps evaluate the impact of circuit-level optimizations on architecture-level design choices. Choices made at the design-stage ensure conflicting requirements from higher-levels are decoupled. We then complement such design-time optimizations with a runtime mechanism that takes advantage of adaptive body-biasing to lower power whilst improving performance in the presence of variability. Our proposal uses a novel fully-digital variation tracking hardware using embedded DRAM (eDRAM) cells to monitor run-time changes in cache latency and leakage. A special fine-grain body-bias generator uses the measurements to generate an optimal body-bias that is needed to meet the required yield targets. A novel variation-tolerant and soft-error hardened eDRAM cell is also proposed as an alternate candidate for replacing existing SRAM-based designs in latency critical memory structures. In the ultra low-power domain where reliable operation is limited by the minimum voltage of operation (Vddmin), we analyse the impact of failures on cache functional margin and functional yield. Towards this end, we have developed a fully automated tool (INFORMER) capable of estimating memory-wide metrics such as power, performance and yield accurately and rapidly. Using the developed tool, we then evaluate the #effectiveness of a new class of hybrid techniques in improving cache yield through failure prevention and correction. Having a holistic perspective of memory-wide metrics helps us arrive at design-choices optimized simultaneously for multiple metrics needed for maintaining lifetime requirements

Design and Analysis of Robust Low Voltage Static Random Access Memories.

Static Random Access Memory (SRAM) is an indispensable part of most modern VLSI designs and dominates silicon area in many applications. In scaled technologies, maintaining high SRAM yield becomes more challenging since they are particularly vulnerable to process variations due to 1) the minimum sized devices used in SRAM bitcells and 2) the large array sizes. At the same time, low power design is a key focus throughout the semiconductor industry. Since low voltage operation is one of the most effective ways to reduce power consumption due to its quadratic relationship to energy savings, lowering the minimum operating voltage (Vmin) of SRAM has gained significant interest. This thesis presents four different approaches to design and analyze robust low voltage SRAM: SRAM analysis method improvement, SRAM bitcell development, SRAM peripheral optimization, and advance device selection. We first describe a novel yield estimation method for bit-interleaved voltage-scaled 8-T SRAMs. Instead of the traditional trade-off between write and read, the trade-off between write and half select disturb is analyzed. In addition, this analysis proposes a method to find an appropriate Write Word-Line (WWL) pulse width to maximize yield. Second, low leakage 10-T SRAM with speed compensation scheme is proposed. During sleep mode of a sensor application, SRAM retaining data cannot be shut down so it is important to minimize leakage in SRAM. This work adopts several leakage reduction techniques while compensating performance. Third, adaptive write architecture for low voltage 8-T SRAMs is proposed. By adaptively modulating WWL width and voltage level, it is possible to achieve low power consumption while maintaining high yield without excessive performance degradation. Finally, low power circuit design based on heterojunction tunneling transistors (HETTs) is discussed. HETTs have a steep subthreshold swing beneficial for low voltage operation. Device modeling and design of logic and SRAM are proposed.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/91569/1/daeyeonk_1.pd

Ultra Low Power Digital Circuit Design for Wireless Sensor Network Applications

Ny forskning innenfor feltet trådløse sensornettverk åpner for nye og innovative produkter og løsninger. Biomedisinske anvendelser er blant områdene med størst potensial og det investeres i dag betydelige beløp for å bruke denne teknologien for å gjøre medisinsk diagnostikk mer effektiv samtidig som man åpner for fjerndiagnostikk basert på trådløse sensornoder integrert i et ”helsenett”. Målet er å forbedre tjenestekvalitet og redusere kostnader samtidig som brukerne skal oppleve forbedret livskvalitet som følge av økt trygghet og mulighet for å tilbringe mest mulig tid i eget hjem og unngå unødvendige sykehusbesøk og innleggelser. For å gjøre dette til en realitet er man avhengige av sensorelektronikk som bruker minst mulig energi slik at man oppnår tilstrekkelig batterilevetid selv med veldig små batterier. I sin avhandling ” Ultra Low power Digital Circuit Design for Wireless Sensor Network Applications” har PhD-kandidat Farshad Moradi fokusert på nye løsninger innenfor konstruksjon av energigjerrig digital kretselektronikk. Avhandlingen presenterer nye løsninger både innenfor aritmetiske og kombinatoriske kretser, samtidig som den studerer nye statiske minneelementer (SRAM) og alternative minnearkitekturer. Den ser også på utfordringene som oppstår når silisiumteknologien nedskaleres i takt med mikroprosessorutviklingen og foreslår løsninger som bidrar til å gjøre kretsløsninger mer robuste og skalerbare i forhold til denne utviklingen. De viktigste konklusjonene av arbeidet er at man ved å introdusere nye konstruksjonsteknikker både er i stand til å redusere energiforbruket samtidig som robusthet og teknologiskalerbarhet øker. Forskningen har vært utført i samarbeid med Purdue University og vært finansiert av Norges Forskningsråd gjennom FRINATprosjektet ”Micropower Sensor Interface in Nanometer CMOS Technology”

Cache architectures based on heterogeneous technologies to deal with manufacturing errors

[EN] SRAM technology has traditionally been used to implement processor caches since it is the fastest existing RAM technology.However,one of the major drawbacks of this technology is its high energy consumption.To reduce this energy consumption modern processors mainly use two complementary techniques: i)low-power operating modes and ii)low-power memory technologies.The first technique allows the processor working at low clock frequencies and supply voltages.The main limitation of this technique is that manufacturing defects can significantly affect the reliability of SRAM cells when working these modes.The second technique brings alternative technologies such as eDRAM, which provides minimum area and power consumption.The main drawback of this memory technology is that reads are destructive and eDRAM cells work slower than SRAM ones. This thesis presents three main contributions regarding low-power caches and heterogeneous technologies: i)an study that identifies the optimal capacitance of eDRAM cells, ii)a novel cache design that tolerates the faults produced by SRAM cells in low-power modes, iii)a methodology that allows obtain the optimal operating frequency/voltage level when working with low-power modes. Regarding the first contribution,in this work SRAM and eDRAM technologies are combined to achieve a low-power fast cache that requires smaller area than conventional designs and that tolerates SRAM failures.First,this dissertation focuses on one of the main critical aspects of the design of heterogeneous caches:eDRAM cell capacitance.In this dissertation the optimal capacitance for an heterogeneous L1 data cache is identified by analyzing the compromise between performance and energy consumption.Experimental results show that an heterogeneous cache implemented with 10fF capacitors offers similar performance as a conventional SRAM cache while providing 55% energy savings and reducing by 29% the cache area. Regarding the second contribution,this thesis proposes a novel organization for a fault-tolerant heterogeneous cache.Currently,reducing the supply voltage is a mechanism widely used to reduce consumption and applies when the system workload activity decreases.However,SRAM cells cause different types of failures when the supply voltage is reduced and thus they limit the minimum operating voltage of the microprocessor. In the proposal,memory cells implemented with eDRAM technology serve as backup in case of failure of SRAM cells, because the correct operation of eDRAM cells is not affected by reduced voltages. The proposed architecture has two working modes: high-performance mode for supply voltages that do not induce SRAM cell failures, and low-power mode for those voltages that cause SRAM cell failures. In high-performance mode, the cache provides full capacity, which enables the processor to achieve its maximum performance. In low-power mode, the effective capacity of the cache is reduced because some of the eDRAM cells are dedicated to recover from SRAM failures. Experimental results show that the performance is scarcely reduced (e.g. less than 2.7% across all the studied benchmarks) with respect to an ideal SRAM cache without failures. Finally,this thesis proposes a methodology to find the optimal frequency/voltage level regarding energy consumption for the designed heterogeneous cache. For this purpose, first SRAM failure types and their probabilities are characterized.Then,the energy consumption of different frequency/voltage levels is evaluated when the system works in low-power mode.The study shows that, mainly due to the impact of SRAM failures on performance,the optimal combination of voltage and frequency from the energy point of view does not always correspond to the minimum voltage.[ES] La tecnología SRAM se ha utilizado tradicionalmente para implementar las memorias cache debido a que es la tecnología de memoria RAM más rápida existente.Por contra,uno de los principales inconvenientes de esta tecnología es su elevado consumo energético.Para reducirlo los procesadores modernos suelen emplear dos técnicas complementarias:i) modos de funcionamiento de bajo consumo y ii)tecnologías de bajo consumo.La primeras técnica consiste en utilizar bajas frecuencias y voltajes de funcionamiento.La principal limitación de esta técnica es que los defectos de fabricación pueden afectar notablemente a la fiabilidad de las celdas SRAM en estos modos.La segunda técnica agrupa tecnologías alternativas como la eDRAM,que ofrece área y consumo mínimos.El inconveniente de esta tecnología es que las lecturas son destructivas y es más lenta que la SRAM. Esta tesis presenta tres contribuciones principales centradas en caches de bajo consumo y tecnologías heterogéneas: i)estudio de la capacitancia óptima de las celdas eDRAM, ii)diseño de una cache tolerante a fallos producidos en las celdas SRAM en modos de bajo consumo, iii)metodología para obtener la relación óptima entre voltaje y frecuencia en procesadores con modos de bajo consumo. Respecto a la primera contribución,en este trabajo se combinan las tecnologías SRAM y eDRAM para conseguir una memoria cache rápida, de bajo consumo, área reducida, y tolerante a los fallos inherentes a la tecnología SRAM.En primer lugar,esta disertación se centra en uno de los aspectos críticos de diseño de caches heterogéneas SRAM/eDRAM: la capacitancia de los condensadores implementados con tecnología eDRAM.En esta tesis se identifica la capacitancia óptima de una cache de datos L1 heterogénea mediante el estudio del compromiso entre prestaciones y consumo energético.Los resultados experimentales muestran que condensadores de 10fF ofrecen prestaciones similares a las de una cache SRAM convencional ahorrando un 55% de consumo y reduciendo un 29% el área ocupada por la cache. Respecto a la segunda contribución,esta tesis propone una organización de cache heterogénea tolerante a fallos.Actualmente,reducir el voltaje de alimentación es un mecanismo muy utilizado para reducir el consumo en condiciones de baja carga.Sin embargo,las celdas SRAM producen distintos tipos de fallos cuando se reduce el voltaje de alimentación y por tanto limitan el voltaje mínimo de funcionamiento del microprocesador. En la cache heterogénea propuesta,las celdas de memoria implementadas con tecnología eDRAM sirven de copia de seguridad en caso de fallo de las celdas SRAM, ya que el correcto funcionamiento de las celdas eDRAM no se ve afectado por tensiones reducidas.La arquitectura propuesta consta de dos modos de funcionamiento: high-performance mode para voltajes de alimentación que no inducen fallos en celdas implementadas en tecnología SRAM, y low-power mode para aquellos que sí lo hacen. En el modo high-performance mode,el procesador dispone de toda la capacidad de la cache.En el modo low-power mode se reduce la capacidad efectiva de la cache puesto que algunas de las celdas eDRAM se dedican a la recuperación de fallos de celdas SRAM.El estudio de prestaciones realizado muestra que éstas bajan hasta un máximo de 2.7% con respecto a una cache perfecta sin fallos. Finalmente, en esta tesis se propone una metodología para encontrar la relación óptima de voltaje/frecuencia con respecto al consumo energético sobre la cache heterogénea previamente diseñada. Para ello,primero se caracterizan los tipos de fallos SRAM y las probabilidades de fallo de los mismos.Después,se evalúa el consumo energético de diferentes combinaciones de voltaje/frecuencia cuando el sistema se encuentra en un modo de bajo consumo.El estudio muestra que la combinación óptima de voltaje y frecuencia desde el punto de vista energético no siempre corresponde al mínimo voltaje debido al imp[CA] La tecnologia SRAM s'ha utilitzat tradicionalment per a implementar les memòries cau degut a que és la tecnologia de memòria RAM més ràpida existent.Per contra, un dels principals inconvenients d'aquesta tecnologia és el seu elevat consum energètic.Per a reduir el consum els processadors moderns solen emprar dues tècniques complementàries: i)modes de funcionament de baix consum i ii)tecnologies de baix consum.La primera tècnica consisteix en utilitzar baixes freqüències i voltatges de funcionament.La principal limitació d'aquesta tècnica és que els defectes de fabricació poden afectar notablement a la fiabilitat de les cel·les SRAM en aquests modes.La segona tècnica agrupa tecnologies alternatives com la eDRAM, que ofereix àrea i consum mínims.L'inconvenient d'aquesta tecnologia és que les lectures són destructives i és més lenta que la SRAM. Aquesta tesi presenta tres contribucions principals centrades en caus de baix consum i tecnologies heterogènies: i)estudi de la capacitancia òptima de les cel·les eDRAM, ii)disseny d'una cau tolerant a fallades produïdes en les cel·les SRAM en modes de baix consum, iii)metodologia per a obtenir la relació òptima entre voltatge i freqüència en processadors amb modes de baix consum. Respecte a la primera contribució, en aquest treball es combinen les tecnologies SRAM i eDRAM per a aconseguir una memòria cau ràpida, de baix consum, àrea reduïda, i tolerant a les fallades inherents a la tecnologia SRAM.En primer lloc, aquesta dissertació se centra en un dels aspectes crítics de disseny de caus heterogènies: la capacitancia dels condensadors implementats amb tecnologia eDRAM.En aquesta dissertació s'identifica la capacitancia òptima d'una cache de dades L1 heterogènia mitjançant l'estudi del compromís entre prestacions i consum energètic.Els resultats experimentals mostren que condensadors de 10fF ofereixen prestacions similars a les d'una cau SRAM convencional estalviant un 55% de consum i reduint un 29% l'àrea ocupada per la cau. Respecte a la segona contribució, aquesta tesi proposa una organització de cau heterogènia tolerant a fallades.Actualment,reduir el voltatge d'alimentació és un mecanisme molt utilitzat per a reduir el consum en condicions de baixa càrrega.Per contra, les cel·les SRAM produeixen diferents tipus de fallades quan es redueix el voltatge d'alimentació i per tant limiten el voltatge mínim de funcionament del microprocessador. En la cau heterogènia proposta, les cel·les de memòria implementades amb tecnologia eDRAM serveixen de còpia de seguretat en cas de fallada de les cel·les SRAM, ja que el correcte funcionament de les cel·les eDRAM no es veu afectat per tensions reduïdes.L'arquitectura proposada consta de dues maneres de funcionament: high-performance mode per a voltatges d'alimentació que no indueixen fallades en cel·les implementades en tecnologia SRAM,i low-power mode per a aquells que sí ho fan.En el mode high-performance,el processador disposa de tota la capacitat de la cau.En el mode low-power es redueix la capacitat efectiva de la cau posat que algunes de les cel·les eDRAM es dediquen a la recuperació de fallades de cel·les SRAM.L'estudi de prestacions realitzat mostra que aquestes baixen fins a un màxim de 2.7% pel que fa a una cache perfecta sense fallades. Finalment,en aquesta tesi es proposa una metodologia per a trobar la relació òptima de voltatge/freqüència pel que fa al consum energètic sobre la cau heterogènia prèviament dissenyada.Per a açò,primer es caracteritzen els tipus de fallades SRAM i les probabilitats de fallada de les mateixes.Després,s'avalua el consum energètic de diferents combinacions de voltatge/freqüència quan el sistema es troba en un mode de baix consum.L'estudi mostra que la combinació òptima de voltatge i freqüència des del punt de vista energètic no sempre correspon al mínim voltatge degut a l'impacte de les fallades de SRAM en les presLorente Garcés, VJ. (2015). Cache architectures based on heterogeneous technologies to deal with manufacturing errors [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/58428TESI