198 research outputs found
Resource Optimization in Wireless Sensor Networks for an Improved Field Coverage and Cooperative Target Tracking
There are various challenges that face a wireless sensor network (WSN) that mainly originate from the limited resources a sensor node usually has. A sensor node often relies on a battery as a power supply which, due to its limited capacity, tends to shorten the life-time of the node and the network as a whole. Other challenges arise from the limited capabilities of the sensors/actuators a node is equipped with, leading to complication like a poor coverage of the event, or limited mobility in the environment. This dissertation deals with the coverage problem as well as the limited power and capabilities of a sensor node.
In some environments, a controlled deployment of the WSN may not be attainable. In such case, the only viable option would be a random deployment over the region of interest (ROI), leading to a great deal of uncovered areas as well as many cutoff nodes. Three different scenarios are presented, each addressing the coverage problem for a distinct purpose. First, a multi-objective optimization is considered with the purpose of relocating the sensor nodes after the initial random deployment, through maximizing the field coverage while minimizing the cost of mobility. Simulations reveal the improvements in coverage, while maintaining the mobility cost to a minimum. In the second scenario, tracking a mobile target with a high level of accuracy is of interest. The relocation process was based on learning the spatial mobility trends of the targets. Results show the improvement in tracking accuracy in terms of mean square position error. The last scenario involves the use of inverse reinforcement learning (IRL) to predict the destination of a given target. This lay the ground for future exploration of the relocation problem to achieve improved prediction accuracy. Experiments investigated the interaction between prediction accuracy and terrain severity.
The other WSN limitation is dealt with by introducing the concept of sparse sensing to schedule the measurements of sensor nodes. A hybrid WSN setup of low and high precision nodes is examined. Simulations showed that the greedy algorithm used for scheduling the nodes, realized a network that is more resilient to individual node failure. Moreover, the use of more affordable nodes stroke a better trade-off between deployment feasibility and precision
Wireless Monitoring Systems for Long-Term Reliability Assessment of Bridge Structures based on Compressed Sensing and Data-Driven Interrogation Methods.
The state of the nation’s highway bridges has garnered significant public attention due to large inventories of aging assets and insufficient funds for repair. Current management methods are based on visual inspections that have many known limitations including reliance on surface evidence of deterioration and subjectivity introduced by trained inspectors. To address the limitations of current inspection practice, structural health monitoring (SHM) systems can be used to provide quantitative measures of structural behavior and an objective basis for condition assessment. SHM systems are intended to be a cost effective monitoring technology that also automates the processing of data to characterize damage and provide decision information to asset managers. Unfortunately, this realization of SHM systems does not currently exist. In order for SHM to be realized as a decision support tool for bridge owners engaged in performance- and risk-based asset management, technological hurdles must still be overcome.
This thesis focuses on advancing wireless SHM systems. An innovative wireless monitoring system was designed for permanent deployment on bridges in cold northern climates which pose an added challenge as the potential for solar harvesting is reduced and battery charging is slowed. First, efforts advancing energy efficient usage strategies for WSNs were made. With WSN energy consumption proportional to the amount of data transmitted, data reduction strategies are prioritized. A novel data compression paradigm termed compressed sensing is advanced for embedment in a wireless sensor microcontroller. In addition, fatigue monitoring algorithms are embedded for local data processing leading to dramatic data reductions. In the second part of the thesis, a radical top-down design strategy (in contrast to global vibration strategies) for a monitoring system is explored to target specific damage concerns of bridge owners. Data-driven algorithmic approaches are created for statistical performance characterization of long-term bridge response. Statistical process control and reliability index monitoring are advanced as a scalable and autonomous means of transforming data into information relevant to bridge risk management. Validation of the wireless monitoring system architecture is made using the Telegraph Road Bridge (Monroe, Michigan), a multi-girder short-span highway bridge that represents a major fraction of the U.S. national inventory.PhDCivil EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/116749/1/ocosean_1.pd
Intelligent Sensor Networks
In the last decade, wireless or wired sensor networks have attracted much attention. However, most designs target general sensor network issues including protocol stack (routing, MAC, etc.) and security issues. This book focuses on the close integration of sensing, networking, and smart signal processing via machine learning. Based on their world-class research, the authors present the fundamentals of intelligent sensor networks. They cover sensing and sampling, distributed signal processing, and intelligent signal learning. In addition, they present cutting-edge research results from leading experts
The use of computational geometry techniques to resolve the issues of coverage and connectivity in wireless sensor networks
Wireless Sensor Networks (WSNs) enhance the ability to sense and control the physical environment in various applications. The functionality of WSNs depends on various aspects like the localization of nodes, the strategies of node deployment, and a lifetime of nodes and routing techniques, etc. Coverage is an essential part of WSNs wherein the targeted area is covered by at least one node. Computational Geometry (CG) -based techniques significantly improve the coverage and connectivity of WSNs. This paper is a step towards employing some of the popular techniques in WSNs in a productive manner. Furthermore, this paper attempts to survey the existing research conducted using Computational Geometry-based methods in WSNs. In order to address coverage and connectivity issues in WSNs, the use of the Voronoi Diagram, Delaunay Triangulation, Voronoi Tessellation, and the Convex Hull have played a prominent role. Finally, the paper concludes by discussing various research challenges and proposed solutions using Computational Geometry-based techniques.Web of Science2218art. no. 700
Recommended from our members
Compressive techniques for sub-Nyquist data acquisition & processing in vibration-based structural health monitoring of engineering structures
Vibration-based structural health monitoring (VSHM) is an automated method for assessing the integrity and performance of dynamically excited structures through processing of structural vibration response signals acquired by arrays of sensors. From a technological viewpoint, wireless sensor networks (WSNs) offer less obtrusive, more economical, and rapid VSHM deployments in civil structures compared to their tethered counterparts, especially in monitoring large-scale and geometrically complex structures. However, WSNs are constrained by certain practical issues related to local power supply at sensors and restrictions to the amount of wirelessly transmitted data due to increased power consumptions and bandwidth limitations in wireless communications.
The primary objective of this thesis is to resolve the above issues by considering sub-Nyquist data acquisition and processing techniques that involve simultaneous signal acquisition and compression before transmission. This drastically reduces the sampling and transmission requirements leading to reduced power consumptions up to 85-90% compared to conventional approaches at Nyquist rate. Within this context, the current state-of-the-art VSHM approaches exploits the theory of compressive sensing (CS) to acquire structural responses at non-uniform random sub-Nyquist sampling schemes. By exploiting the sparse structure of the analysed signals in a known vector basis (i.e., non-zero signal coefficients), the original time-domain signals are reconstructed at the uniform Nyquist grid by solving an underdetermined optimisation problem subject to signal sparsity constraints. However, the CS sparse recovery is a computationally intensive problem that strongly depends on and is limited by the sparsity attributes of the measured signals on a pre-defined expansion basis. This sparsity information, though, is unknown in real-time VSHM deployments while it is adversely affected by noisy environments encountered in practice.
To efficiently address the above limitations encountered in CS-based VSHM methods, this research study proposes three alternative approaches for energy-efficient VSHM using compressed structural response signals under ambient vibrations. The first approach aims to enhance the sparsity information of vibrating structural responses by considering their representation on the wavelet transform domain using various oscillatory functions with different frequency domain attributes. In this respect, a novel data-driven damage detection algorithm is developed herein, emerged as a fusion of the CS framework with the Relative Wavelet Entropy (RWE) damage index. By processing sparse signal coefficients on the harmonic wavelet transform for two comparative structural states (i.e., damage versus healthy state), CS-based RWE damage indices are retrieved from a significantly reduced number of wavelet coefficients without reconstructing structural responses in time-domain.
The second approach involves a novel signal-agnostic sub-Nyquist spectral estimation method free from sparsity constraints, which is proposed herein as a viable alternative for power-efficient WSNs in VSHM applications. The developed method relies on Power Spectrum Blind Sampling (PSBS) techniques together with a deterministic multi-coset sampling pattern, capable to acquire stationary structural responses at sub-Nyquist rates without imposing sparsity conditions. Based on a network of wireless sensors operating on the same sampling pattern, auto/cross power-spectral density estimates are computed directly from compressed data by solving an overdetermined optimisation problem; thus, by-passing the computationally intensive signal reconstruction operations in time-domain. This innovative approach can be fused with standard operational modal analysis algorithms to estimate the inherent resonant frequencies and modal deflected shapes of structures under low-amplitude ambient vibrations with the minimum power, computational and memory requirements at the sensor, while outperforming pertinent CS-based approaches. Based on the extracted modal in formation, numerous data-driven damage detection strategies can be further employed to evaluate the condition of the monitored structures.
The third approach of this thesis proposes a noise-immune damage detection method capable to capture small shifts in structural natural frequencies before and after a seismic event of low intensity using compressed acceleration data contaminated with broadband noise. This novel approach relies on a recently established sub-Nyquist pseudo-spectral estimation method which combines the deterministic co-prime sub-Nyquist sampling technique with the multiple signal classification (MUSIC) pseudo-spectrum estimator. This is also a signal-agnostic and signal reconstruction-free method that treats structural response signals as wide-sense stationary stochastic processes to retrieve, with very high resolution, auto-power spectral densities and structural natural frequency estimates directly from compressed data while filtering out additive broadband noise
Target Detection Architecture for Resource Constrained Wireless Sensor Networks within Internet of Things
Wireless sensor networks (WSN) within Internet of Things (IoT) have the potential
to address the growing detection and classi�cation requirements among many
surveillance applications. RF sensing techniques are the next generation technologies
which o�er distinct advantages over traditional passive means of sensing
such as acoustic and seismic which are used for surveillance and target detection
applications of WSN. RF sensing based WSN within IoT detect the presence of
designated targets by transmitting RF signals into the sensing environment and
observing the re
ected echoes. In this thesis, an RF sensing based target detection
architecture for surveillance applications of WSN has been proposed to detect the
presence of stationary targets within the sensing environment.
With multiple sensing nodes operating simultaneously within the sensing region,
diversity among the sensing nodes in the choice of transmit waveforms is required.
Existing multiple access techniques to accommodate multiple sensing nodes within
the sensing environment are not suitable for RF sensing based WSN. In this thesis,
a diversity in the choice of the transmit waveforms has been proposed and transmit
waveforms which are suitable for RF sensing based WSN have been discussed. A
criterion have been de�ned to quantify the ease of detecting the signal and energy
e�ciency of the signal based on which ease of detection index and energy e�ciency
index respectively have been generated. The waveform selection criterion proposed
in this thesis takes the WSN sensing conditions into account and identi�es the
optimum transmit waveform within the available choices of transmit waveforms
based on their respective ease of detection and energy e�ciency indexes.
A target detector analyses the received RF signals to make a decision regarding
the existence or absence of targets within the sensing region. Existing target detectors
which are discussed in the context of WSN do not take the factors such
as interference and nature of the sensing environment into account. Depending
on the nature of the sensing environment, in this thesis the sensing environments are classi�ed as homogeneous and heterogeneous sensing environments. Within
homogeneous sensing environments the presence of interference from the neighbouring
sensing nodes is assumed. A target detector has been proposed for WSN
within homogeneous sensing environments which can reliably detect the presence
of targets. Within heterogeneous sensing environments the presence of clutter and
interfering waveforms is assumed. A target detector has been proposed for WSN
within heterogeneous sensing environments to detect targets in the presence of
clutter and interfering waveforms. A clutter estimation technique has been proposed
to assist the proposed target detector to achieve increased target detection
reliability in the presence of clutter. A combination of compressive and two-step
target detection architectures has been proposed to reduce the transmission costs.
Finally, a 2-stage target detection architecture has been proposed to reduce the
computational complexity of the proposed target detection architecture
Exploiting Sparse Structures in Source Localization and Tracking
This thesis deals with the modeling of structured signals under different sparsity constraints. Many phenomena exhibit an inherent structure that may be exploited when setting up models, examples include audio waves, radar, sonar, and image objects. These structures allow us to model, identify, and classify the processes, enabling parameter estimation for, e.g., identification, localisation, and tracking.In this work, such structures are exploited, with the goal to achieve efficient localisation and tracking of a structured source signal. Specifically, two scenarios are considered. In papers A and B, the aim is to find a sparse subset of a structured signal such that the signal parameters and source locations maybe estimated in an optimal way. For the sparse subset selection, a combinatorial optimization problem is approximately solved by means of convex relaxation, with the results of allowing for different types of a priori information to be incorporated in the optimization. In paper C, a sparse subset of data is provided, and a generative model is used to find the location of an unknown number of jammers in a wireless network, with the jammers’ movement in the network being tracked as additional observations become available
An overview on structural health monitoring: From the current state-of-the-art to new bio-inspired sensing paradigms
In the last decades, the field of structural health monitoring (SHM) has grown exponentially. Yet, several technical constraints persist, which are preventing full realization of its potential. To upgrade current state-of-the-art technologies, researchers have started to look at nature’s creations giving rise to a new field called ‘biomimetics’, which operates across the border between living and non-living systems. The highly optimised and time-tested performance of biological assemblies keeps on inspiring the development of bio-inspired artificial counterparts that can potentially outperform conventional systems. After a critical appraisal on the current status of SHM, this paper presents a review of selected works related to neural, cochlea and immune-inspired algorithms implemented in the field of SHM, including a brief survey of the advancements of bio-inspired sensor technology for the purpose of SHM. In parallel to this engineering progress, a more in-depth understanding of the most suitable biological patterns to be transferred into multimodal SHM systems is fundamental to foster new scientific breakthroughs. Hence, grounded in the dissection of three selected human biological systems, a framework for new bio-inspired sensing paradigms aimed at guiding the identification of tailored attributes to transplant from nature to SHM is outlined.info:eu-repo/semantics/acceptedVersio
Topology control and data handling in wireless sensor networks
Our work in this thesis have provided two distinctive contributions to WSNs in the
areas of data handling and topology control.
In the area of data handling, we have demonstrated a solution to improve the
power efficiency whilst preserving the important data features by data compression
and the use of an adaptive sampling strategy, which are applicable to the specific
application for oceanography monitoring required by the SECOAS project. Our work
on oceanographic data analysis is important for the understanding of the data we are
dealing with, such that suitable strategies can be deployed and system performance
can be analysed. The Basic Adaptive Sampling Scheduler (BASS) algorithm uses
the statistics of the data to adjust the sampling behaviour in a sensor node according
to the environment in order to conserve energy and minimise detection delay.
The motivation of topology control (TC) is to maintain the connectivity of the
network, to reduce node degree to ease congestion in a collision-based medium access
scheme; and to reduce power consumption in the sensor nodes. We have developed
an algorithm Subgraph Topology Control (STC) that is distributed and does not
require additional equipment to be implemented on the SECOAS nodes. STC uses
a metric called subgraph number, which measures the 2-hops connectivity in the
neighbourhood of a node. It is found that STC consistently forms topologies that
have lower node degrees and higher probabilities of connectivity, as compared to k-Neighbours, an alternative algorithm that does not rely on special hardware on sensor
node. Moreover, STC also gives better results in terms of the minimum degree in the
network, which implies that the network structure is more robust to a single point
of failure. As STC is an iterative algorithm, it is very scalable and adaptive and is
well suited for the SECOAS applications
- …