A ZigBee-based home automation system

In recent years, the home environment has seen a rapid introduction of network enabled digital technology. This technology offers new and exciting opportunities to increase the connectivity of devices within the home for the purpose of home automation. Moreover, with the rapid expansion of the Internet, there is the added potential for the remote control and monitoring of such network enabled devices. However, the adoption of home automation systems has been slow. This paper identifies the reasons for this slow adoption and evaluates the potential of ZigBee for addressing these problems through the design and implementation of a flexible home automation architecture. A ZigBee based home automation system and Wi-Fi network are integrated through a common home gateway. The home gateway provides network interoperability, a simple and flexible user interface, and remote access to the system. A dedicated virtual home is implemented to cater for the system’s security and safety needs. To demonstrate the feasibility and effectiveness of the proposed system, four devices, a light switch, radiator valve, safety sensor and ZigBee remote control have been developed and evaluated with the home automation system

Characteristics of muscle activation patterns at the ankle in stroke patients during walking.

Stroke causes impairment of the sensory and motor systems; this can lead to difficulties in walking and participation in society. For effective rehabilitation it is important to measure the essential characteristics of impairment and associate these with the nature of disability. Efficient gait requires a complex interplay of muscles. Surface electromyography(sEMG) can be used to measure muscle activity and to observe disruption to this interplay after stroke. Yet, classification of this disruption in stroke patients has not been achieved. It is hypothesised that features identified from the sEMG signal can be used to classify underlying impairments. A clinically viable gait analysis system has been developed, integrating an in-house wireless sEMG system synchronised with bilateral video and inertial orientation sensors. Signal processing techniques have been extended and implemented, appropriate for use with sEMG. These techniques have focussed on frequency domain features using wavelet analysis and muscle activation patterns using principal component analysis. The system has been used to measure gait from stroke patients and un-impaired subjects. Characteristic patterns of activity from the ankle musculature were defined using principal component analysis of the linear envelope. Patients with common patterns of tibialis anterior activity did not necessarily share common patterns of gastrocnemius or soleus activity. Patients with similar linear envelope patterns did not always present with the same kinematic profiles. The relationship between observable impairments, kinematics and sEMG is seen to be complex and there is therefore a need for a multidimensional view of gait data in relation to stroke impairment. The analysis of instantaneous mean frequency and time-frequency has revealed additional periods of activity not obvious in the linear or raw signal representation. Furthermore, characteristic calf activity was identified that may relate to abnormal reflex activity. This has provided additional information with which to group characteristic muscle activity. An evaluation of the co-activation of gastrocnemius and tibialis anterior muscles using a sub-band filtering technique revealed three groups; those with distinct co-activation, those with little co-activation and those with continuous activity in the antagonistic pair across the stride. Signal features have been identified in sEMG recordings from stroke patients whilst walking extending current signal processing techniques. Common features of the sEMG and movement have been grouped creating a decision matrix. These results have contributed to the field of clinical measurement and diagnosis because interpretation of this decision matrix is related to underlying impairment. This has provided a framework from which subsequent studies can classify characteristic patterns of impairment within the stroke population; and thus assist in the provision of rehabilitative interventions

Mechanical, thermal, data and power transfer types for robotic space interfaces for orbital and planetary missions - a technical review

A wide variety of scientific aims have been formulated for future explorations of space and planets. In order to achieve these aims, a need for robotic systems and mission set-ups with increasing complexity arises. The H2020 EU-funded project SIROM (Standard Interface for Robotic Manipulation of Payloads in Future Space Missions), aims to realize an integrated interface for mechanical, data, electrical and thermal connectivity that allows a reliable, robust and multi-functional coupling. The present paper reports an overview of classifications of power, data and mechanical interfaces and thermal transfer methods in current robotic and space applications. Eventually, the paper presents ideas for innovation and development of standard multi-functional interface with the most promising developments expected in the next few years

Network simulation for professional audio networks

Audio Engineers are required to design and deploy large multi-channel sound systems which meet a set of requirements and use networking technologies such as Firewire and Ethernet AVB. Bandwidth utilisation and parameter groupings are among the factors which need to be considered in these designs. An implementation of an extensible, generic simulation framework would allow audio engineers to easily compare protocols and networking technologies and get near real time responses with regards to bandwidth utilisation. Our hypothesis is that an application-level capability can be developed which uses a network simulation framework to enable this process and enhances the audio engineer’s experience of designing and configuring a network. This thesis presents a new, extensible simulation framework which can be utilised to simulate professional audio networks. This framework is utilised to develop an application - AudioNetSim - based on the requirements of an audio engineer. The thesis describes the AudioNetSim models and implementations for Ethernet AVB, Firewire and the AES- 64 control protocol. AudioNetSim enables bandwidth usage determination for any network configuration and connection scenario and is used to compare Firewire and Ethernet AVB bandwidth utilisation. It also applies graph theory to the circular join problem and provides a solution to detect circular joins

A critical analysis of research potential, challenges and future directives in industrial wireless sensor networks

In recent years, Industrial Wireless Sensor Networks (IWSNs) have emerged as an important research theme with applications spanning a wide range of industries including automation, monitoring, process control, feedback systems and automotive. Wide scope of IWSNs applications ranging from small production units, large oil and gas industries to nuclear fission control, enables a fast-paced research in this field. Though IWSNs offer advantages of low cost, flexibility, scalability, self-healing, easy deployment and reformation, yet they pose certain limitations on available potential and introduce challenges on multiple fronts due to their susceptibility to highly complex and uncertain industrial environments. In this paper a detailed discussion on design objectives, challenges and solutions, for IWSNs, are presented. A careful evaluation of industrial systems, deadlines and possible hazards in industrial atmosphere are discussed. The paper also presents a thorough review of the existing standards and industrial protocols and gives a critical evaluation of potential of these standards and protocols along with a detailed discussion on available hardware platforms, specific industrial energy harvesting techniques and their capabilities. The paper lists main service providers for IWSNs solutions and gives insight of future trends and research gaps in the field of IWSNs

Proceedings of the 4th field robot event 2006, Stuttgart/Hohenheim, Germany, 23-24th June 2006

Zeer uitgebreid verslag van het 4e Fieldrobotevent, dat gehouden werd op 23 en 24 juni 2006 in Stuttgart/Hohenhei

Quality assessment technique for ubiquitous software and middleware

The new paradigm of computing or information systems is ubiquitous computing systems. The technology-oriented issues of ubiquitous computing systems have made researchers pay much attention to the feasibility study of the technologies rather than building quality assurance indices or guidelines. In this context, measuring quality is the key to developing high-quality ubiquitous computing products. For this reason, various quality models have been defined, adopted and enhanced over the years, for example, the need for one recognised standard quality model (ISO/IEC 9126) is the result of a consensus for a software quality model on three levels: characteristics, sub-characteristics, and metrics. However, it is very much unlikely that this scheme will be directly applicable to ubiquitous computing environments which are considerably different to conventional software, trailing a big concern which is being given to reformulate existing methods, and especially to elaborate new assessment techniques for ubiquitous computing environments. This paper selects appropriate quality characteristics for the ubiquitous computing environment, which can be used as the quality target for both ubiquitous computing product evaluation processes ad development processes. Further, each of the quality characteristics has been expanded with evaluation questions and metrics, in some cases with measures. In addition, this quality model has been applied to the industrial setting of the ubiquitous computing environment. These have revealed that while the approach was sound, there are some parts to be more developed in the future