A First Look at Commercial 5G Performance on Smartphones

We conduct to our knowledge a first measurement study of commercial 5G performance on smartphones by closely examining 5G networks of three carriers (two mmWave carriers, one mid-band carrier) in three U.S. cities. We conduct extensive field tests on 5G performance in diverse urban environments. We systematically analyze the handoff mechanisms in 5G and their impact on network performance. We explore the feasibility of using location and possibly other environmental information to predict the network performance. We also study the app performance (web browsing and HTTP download) over 5G. Our study consumes more than 15 TB of cellular data. Conducted when 5G just made its debut, it provides a "baseline" for studying how 5G performance evolves, and identifies key research directions on improving 5G users' experience in a cross-layer manner. We have released the data collected from our study (referred to as 5Gophers) at https://fivegophers.umn.edu/www20.Comment: Published at The Web Conference 2020 (WWW 2020). Please include WWW in any citation

Measurement-Driven Algorithm and System Design for Wireless and Datacenter Networks

The growing number of mobile devices and data-intensive applications pose unique challenges for wireless access networks as well as datacenter networks that enable modern cloud-based services. With the enormous increase in volume and complexity of traffic from applications such as video streaming and cloud computing, the interconnection networks have become a major performance bottleneck. In this thesis, we study algorithms and architectures spanning several layers of the networking protocol stack that enable and accelerate novel applications and that are easily deployable and scalable. The design of these algorithms and architectures is motivated by measurements and observations in real world or experimental testbeds. In the first part of this thesis, we address the challenge of wireless content delivery in crowded areas. We present the AMuSe system, whose objective is to enable scalable and adaptive WiFi multicast. AMuSe is based on accurate receiver feedback and incurs a small control overhead. This feedback information can be used by the multicast sender to optimize multicast service quality, e.g., by dynamically adjusting transmission bitrate. Specifically, we develop an algorithm for dynamic selection of a subset of the multicast receivers as feedback nodes which periodically send information about the channel quality to the multicast sender. Further, we describe the Multicast Dynamic Rate Adaptation (MuDRA) algorithm that utilizes AMuSe's feedback to optimally tune the physical layer multicast rate. MuDRA balances fast adaptation to channel conditions and stability, which is essential for multimedia applications. We implemented the AMuSe system on the ORBIT testbed and evaluated its performance in large groups with approximately 200 WiFi nodes. Our extensive experiments demonstrate that AMuSe can provide accurate feedback in a dense multicast environment. It outperforms several alternatives even in the case of external interference and changing network conditions. Further, our experimental evaluation of MuDRA on the ORBIT testbed shows that MuDRA outperforms other schemes and supports high throughput multicast flows to hundreds of nodes while meeting quality requirements. As an example application, MuDRA can support multiple high quality video streams, where 90% of the nodes report excellent or very good video quality. Next, we specifically focus on ensuring high Quality of Experience (QoE) for video streaming over WiFi multicast. We formulate the problem of joint adaptation of multicast transmission rate and video rate for ensuring high video QoE as a utility maximization problem and propose an online control algorithm called DYVR which is based on Lyapunov optimization techniques. We evaluated the performance of DYVR through analysis, simulations, and experiments using a testbed composed of Android devices and o the shelf APs. Our evaluation shows that DYVR can ensure high video rates while guaranteeing a low but acceptable number of segment losses, buffer underflows, and video rate switches. We leverage the lessons learnt from AMuSe for WiFi to address the performance issues with LTE evolved Multimedia Broadcast/Multicast Service (eMBMS). We present the Dynamic Monitoring (DyMo) system which provides low-overhead and real-time feedback about eMBMS performance. DyMo employs eMBMS for broadcasting instructions which indicate the reporting rates as a function of the observed Quality of Service (QoS) for each UE. This simple feedback mechanism collects very limited QoS reports which can be used for network optimization. We evaluated the performance of DyMo analytically and via simulations. DyMo infers the optimal eMBMS settings with extremely low overhead, while meeting strict QoS requirements under different UE mobility patterns and presence of network component failures. In the second part of the thesis, we study datacenter networks which are key enablers of the end-user applications such as video streaming and storage. Datacenter applications such as distributed file systems, one-to-many virtual machine migrations, and large-scale data processing involve bulk multicast flows. We propose a hardware and software system for enabling physical layer optical multicast in datacenter networks using passive optical splitters. We built a prototype and developed a simulation environment to evaluate the performance of the system for bulk multicasting. Our evaluation shows that the optical multicast architecture can achieve higher throughput and lower latency than IP multicast and peer-to-peer multicast schemes with lower switching energy consumption. Finally, we study the problem of congestion control in datacenter networks. Quantized Congestion Control (QCN), a switch-supported standard, utilizes direct multi-bit feedback from the network for hardware rate limiting. Although QCN has been shown to be fast-reacting and effective, being a Layer-2 technology limits its adoption in IP-routed Layer 3 datacenters. We address several design challenges to overcome QCN feedback's Layer- 2 limitation and use it to design window-based congestion control (QCN-CC) and load balancing (QCN-LB) schemes. Our extensive simulations, based on real world workloads, demonstrate the advantages of explicit, multi-bit congestion feedback, especially in a typical environment where intra-datacenter traffic with short Round Trip Times (RTT: tens of s) run in conjunction with web-facing traffic with long RTTs (tens of milliseconds)

Learning for Network Applications and Control

The emergence of new Internet applications and technologies have resulted in an increased complexity as well as a need for lower latency, higher bandwidth, and increased reliability. This ultimately results in an increased complexity of network operation and management. Manual management is not sufficient to meet these new requirements. There is a need for data driven techniques to advance from manual management to autonomous management of network systems. One such technique, Machine Learning (ML), can use data to create models from hidden patterns in the data and make autonomous modifications. This approach has shown significant improvements in other domains (e.g., image recognition and natural language processing). The use of ML, along with advances in programmable control of Software- Defined Networks (SDNs), will alleviate manual network intervention and ultimately aid in autonomous network operations. However, realizing a data driven system that can not only understand what is happening in the network but also operate autonomously requires advances in the networking domain, as well as in ML algorithms. In this thesis, we focus on developing ML-based network architectures and data driven net- working algorithms whose objective is to improve the performance and management of future networks and network applications. We focus on problems spanning across the network protocol stack from the application layer to the physical layer. We design algorithms and architectures that are motivated by measurements and observations in real world or experimental testbeds. In Part I we focus on the challenge of monitoring and estimating user video quality of experience (QoE) of encrypted video traffic for network operators. We develop a system for REal-time QUality of experience metric detection for Encrypted Traffic, Requet. Requet uses a detection algorithm to identify video and audio chunks from the IP headers of encrypted traffic. Features extracted from the chunk statistics are used as input to a random forest ML model to predict QoE metrics. We evaluate Requet on a YouTube dataset we collected, consisting of diverse video assets delivered over various WiFi and LTE network conditions. We then extend Requet, and present a study on YouTube TV live streaming traffic behavior over WiFi and cellular networks covering a 9-month period. We observed pipelined chunk requests, a reduced buffer capacity, and a more stable chunk duration across various video resolutions compared to prior studies of on-demand streaming services. We develop a YouTube TV analysis tool using chunks statistics detected from the extracted data as input to a ML model to infer user QoE metrics. In Part II we consider allocating end-to-end resources in cellular networks. Future cellular networks will utilize SDN and Network Function Virtualization (NFV) to offer increased flexibility for network infrastructure operators to utilize network resources. Combining these technologies with real-time network load prediction will enable efficient use of network resources. Specifically, we leverage a type of recurrent neural network, Long Short-Term Memory (LSTM) neural networks, for (i) service specific traffic load prediction for network slicing, and (ii) Baseband Unit (BBU) pool traffic load prediction in a 5G cloud Radio Access Network (RAN). We show that leveraging a system with better accuracy to predict service requirements results in a reduction of operation costs. We focus on addressing the optical physical layer in Part III. Greater network flexibility through SDN and the growth of high bandwidth services are motivating faster service provisioning and capacity management in the optical layer. These functionalities require increased capacity along with rapid reconfiguration of network resources. Recent advances in optical hardware can enable a dramatic reduction in wavelength provisioning times in optical circuit switched networks. To support such operations, it is imperative to reconfigure the network without causing a drop in service quality to existing users. Therefore, we present a ML system that uses feedforward neural networks to predict the dynamic response of an optically circuit-switched 90-channel multi-hop Reconfigurable Optical Add-Drop Multiplexer (ROADM) network. We show that the trained deep neural network can recommend wavelength assignments for wavelength switching with minimal power excursions. We extend the performance of the ML system by implementing and testing a Hybrid Machine Learning (HML) model, which combines an analytical model with a neural network machine learning model to achieve higher prediction accuracy. In Part IV, we use a data-driven approach to address the challenge of wireless content delivery in crowded areas. We present the Adaptive Multicast Services (AMuSe) system, whose objective is to enable scalable and adaptive WiFi multicast. Specifically, we develop an algorithm for dynamic selection of a subset of the multicast receivers as feedback nodes. Further, we describe the Multicast Dynamic Rate Adaptation (MuDRA) algorithm that utilizes AMuSe’s feedback to optimally tune the physical layer multicast rate. Our experimental evaluation of MuDRA on the ORBIT testbed shows that MuDRA outperforms other schemes and supports high throughput multicast flows to hundreds of nodes while meeting quality requirements. We leverage the lessons learned from AMuSe for WiFi and use order statistics to address the performance issues with LTE evolved Multimedia Broadcast/Multicast Service (eMBMS). We present the Dynamic Monitoring (DyMo) system which provides low-overhead and real-time feedback about eMBMS performance to be used for network optimization. We focus on the Quality of Service (QoS) Evaluation module and develop a Two-step estimation algorithm which can efficiently identify the SNR Threshold as a one time estimation. DyMo significantly outperforms alternative schemes based on the Order-Statistics estimation method which relies on random or periodic sampling