Map-enhanced visual taxiway extraction for autonomous taxiing of UAVs

In this paper, a map-enhanced method is proposed for vision-based taxiway centreline extraction, which is a prerequisite of autonomous visual navigation systems for unmanned aerial vehicles. Comparing with other sensors, cameras are able to provide richer information. Consequently, vision based navigations have been intensively studied in the recent two decades and computer vision techniques are shown to be capable of dealing with various problems in applications. However, there are signi cant drawbacks associated with these computer vision techniques that the accuracy and robustness may not meet the required standard in some application scenarios. In this paper, a taxiway map is incorporated into the analysis as prior knowledge to improve on the vehicle localisation and vision based centreline extraction. We develop a map updating algorithm so that the traditional map is able to adapt to the dynamic environment via Bayesian learning. The developed method is illustrated using a simulation study

Fast, Autonomous Flight in GPS-Denied and Cluttered Environments

One of the most challenging tasks for a flying robot is to autonomously navigate between target locations quickly and reliably while avoiding obstacles in its path, and with little to no a-priori knowledge of the operating environment. This challenge is addressed in the present paper. We describe the system design and software architecture of our proposed solution, and showcase how all the distinct components can be integrated to enable smooth robot operation. We provide critical insight on hardware and software component selection and development, and present results from extensive experimental testing in real-world warehouse environments. Experimental testing reveals that our proposed solution can deliver fast and robust aerial robot autonomous navigation in cluttered, GPS-denied environments.Comment: Pre-peer reviewed version of the article accepted in Journal of Field Robotic

Navigation of Unmanned Aerial Vehicles in GPS-denied Environments

Ph.DDOCTOR OF PHILOSOPH

Enabling Multi-LiDAR Sensing in GNSS-Denied Environments: SLAM Dataset, Benchmark, and UAV Tracking with LiDAR-as-a-camera

The rise of Light Detection and Ranging (LiDAR) sensors has profoundly impacted industries ranging from automotive to urban planning. As these sensors become increasingly affordable and compact, their applications are diversifying, driving precision, and innovation. This thesis delves into LiDAR's advancements in autonomous robotic systems, with a focus on its role in simultaneous localization and mapping (SLAM) methodologies and LiDAR as a camera-based tracking for Unmanned Aerial Vehicles (UAV). Our contributions span two primary domains: the Multi-Modal LiDAR SLAM Benchmark, and the LiDAR-as-a-camera UAV Tracking. In the former, we have expanded our previous multi-modal LiDAR dataset by adding more data sequences from various scenarios. In contrast to the previous dataset, we employ different ground truth-generating approaches. We propose a new multi-modal multi-lidar SLAM-assisted and ICP-based sensor fusion method for generating ground truth maps. Additionally, we also supplement our data with new open road sequences with GNSS-RTK. This enriched dataset, supported by high-resolution LiDAR, provides detailed insights through an evaluation of ten configurations, pairing diverse LiDAR sensors with state-of-the-art SLAM algorithms. In the latter contribution, we leverage a custom YOLOv5 model trained on panoramic low-resolution images from LiDAR reflectivity (LiDAR-as-a-camera) to detect UAVs, demonstrating the superiority of this approach over point cloud or image-only methods. Additionally, we evaluated the real-time performance of our approach on the Nvidia Jetson Nano, a popular mobile computing platform. Overall, our research underscores the transformative potential of integrating advanced LiDAR sensors with autonomous robotics. By bridging the gaps between different technological approaches, we pave the way for more versatile and efficient applications in the future

Autonomous aerial robot for high-speed search and intercept applications

In recent years, high-speed navigation and environment interaction in the context of aerial robotics has become a field of interest for several academic and industrial research studies. In particular, Search and Intercept (SaI) applications for aerial robots pose a compelling research area due to their potential usability in several environments. Nevertheless, SaI tasks involve a challenging development regarding sensory weight, onboard computation resources, actuation design, and algorithms for perception and control, among others. In this work, a fully autonomous aerial robot for high-speed object grasping has been proposed. As an additional subtask, our system is able to autonomously pierce balloons located in poles close to the surface. Our first contribution is the design of the aerial robot at an actuation and sensory level consisting of a novel gripper design with additional sensors enabling the robot to grasp objects at high speeds. The second contribution is a complete software framework consisting of perception, state estimation, motion planning, motion control, and mission control in order to rapidly and robustly perform the autonomous grasping mission. Our approach has been validated in a challenging international competition and has shown outstanding results, being able to autonomously search, follow, and grasp a moving object at 6 m/s in an outdoor environment.Agencia Estatal de InvestigaciónKhalifa Universit

Map-Based Localization for Unmanned Aerial Vehicle Navigation

Unmanned Aerial Vehicles (UAVs) require precise pose estimation when navigating in indoor and GNSS-denied / GNSS-degraded outdoor environments. The possibility of crashing in these environments is high, as spaces are confined, with many moving obstacles. There are many solutions for localization in GNSS-denied environments, and many different technologies are used. Common solutions involve setting up or using existing infrastructure, such as beacons, Wi-Fi, or surveyed targets. These solutions were avoided because the cost should be proportional to the number of users, not the coverage area. Heavy and expensive sensors, for example a high-end IMU, were also avoided. Given these requirements, a camera-based localization solution was selected for the sensor pose estimation. Several camera-based localization approaches were investigated. Map-based localization methods were shown to be the most efficient because they close loops using a pre-existing map, thus the amount of data and the amount of time spent collecting data are reduced as there is no need to re-observe the same areas multiple times. This dissertation proposes a solution to address the task of fully localizing a monocular camera onboard a UAV with respect to a known environment (i.e., it is assumed that a 3D model of the environment is available) for the purpose of navigation for UAVs in structured environments. Incremental map-based localization involves tracking a map through an image sequence. When the map is a 3D model, this task is referred to as model-based tracking. A by-product of the tracker is the relative 3D pose (position and orientation) between the camera and the object being tracked. State-of-the-art solutions advocate that tracking geometry is more robust than tracking image texture because edges are more invariant to changes in object appearance and lighting. However, model-based trackers have been limited to tracking small simple objects in small environments. An assessment was performed in tracking larger, more complex building models, in larger environments. A state-of-the art model-based tracker called ViSP (Visual Servoing Platform) was applied in tracking outdoor and indoor buildings using a UAVs low-cost camera. The assessment revealed weaknesses at large scales. Specifically, ViSP failed when tracking was lost, and needed to be manually re-initialized. Failure occurred when there was a lack of model features in the cameras field of view, and because of rapid camera motion. Experiments revealed that ViSP achieved positional accuracies similar to single point positioning solutions obtained from single-frequency (L1) GPS observations standard deviations around 10 metres. These errors were considered to be large, considering the geometric accuracy of the 3D model used in the experiments was 10 to 40 cm. The first contribution of this dissertation proposes to increase the performance of the localization system by combining ViSP with map-building incremental localization, also referred to as simultaneous localization and mapping (SLAM). Experimental results in both indoor and outdoor environments show sub-metre positional accuracies were achieved, while reducing the number of tracking losses throughout the image sequence. It is shown that by integrating model-based tracking with SLAM, not only does SLAM improve model tracking performance, but the model-based tracker alleviates the computational expense of SLAMs loop closing procedure to improve runtime performance. Experiments also revealed that ViSP was unable to handle occlusions when a complete 3D building model was used, resulting in large errors in its pose estimates. The second contribution of this dissertation is a novel map-based incremental localization algorithm that improves tracking performance, and increases pose estimation accuracies from ViSP. The novelty of this algorithm is the implementation of an efficient matching process that identifies corresponding linear features from the UAVs RGB image data and a large, complex, and untextured 3D model. The proposed model-based tracker improved positional accuracies from 10 m (obtained with ViSP) to 46 cm in outdoor environments, and improved from an unattainable result using VISP to 2 cm positional accuracies in large indoor environments. The main disadvantage of any incremental algorithm is that it requires the camera pose of the first frame. Initialization is often a manual process. The third contribution of this dissertation is a map-based absolute localization algorithm that automatically estimates the camera pose when no prior pose information is available. The method benefits from vertical line matching to accomplish a registration procedure of the reference model views with a set of initial input images via geometric hashing. Results demonstrate that sub-metre positional accuracies were achieved and a proposed enhancement of conventional geometric hashing produced more correct matches - 75% of the correct matches were identified, compared to 11%. Further the number of incorrect matches was reduced by 80%

Aerial-Ground collaborative sensing: Third-Person view for teleoperation

Rapid deployment and operation are key requirements in time critical application, such as Search and Rescue (SaR). Efficiently teleoperated ground robots can support first-responders in such situations. However, first-person view teleoperation is sub-optimal in difficult terrains, while a third-person perspective can drastically increase teleoperation performance. Here, we propose a Micro Aerial Vehicle (MAV)-based system that can autonomously provide third-person perspective to ground robots. While our approach is based on local visual servoing, it further leverages the global localization of several ground robots to seamlessly transfer between these ground robots in GPS-denied environments. Therewith one MAV can support multiple ground robots on a demand basis. Furthermore, our system enables different visual detection regimes, and enhanced operability, and return-home functionality. We evaluate our system in real-world SaR scenarios.Comment: Accepted for publication in 2018 IEEE International Symposium on Safety, Security and Rescue Robotics (SSRR

A cooperative navigation system with distributed architecture for multiple unmanned aerial vehicles

Unmanned aerial vehicles (UAVs) have been widely used in many applications due to, among other features, their versatility, reduced operating cost, and small size. These applications increasingly demand that features related to autonomous navigation be employed, such as mapping. However, the reduced capacity of resources such as, for example, battery and hardware (memory and processing units) can hinder the development of these applications in UAVs. Thus, the collaborative use of multiple UAVs for mapping can be used as an alternative to solve this problem, with a cooperative navigation system. This system requires that individual local maps be transmitted and merged into a global map in a distributed manner. In this scenario, there are two main problems to be addressed: the transmission of maps among the UAVs and the merging of the local maps in each UAV. In this context, this work describes the design, development, and evaluation of a cooperative navigation system with distributed architecture to be used by multiple UAVs. This system uses proposed structures to store the 3D occupancy grid maps. Furthermore, maps are compressed and transmitted between UAVs using algorithms specially proposed for these purposes. Then the local 3D maps are merged in each UAV. In this map merging system, maps are processed before and merged in pairs using suitable algorithms to make them compatible with the 3D occupancy grid map data. In addition, keypoints orientation properties are obtained from potential field gradients. Some proposed filters are used to improve the parameters of the transformations among maps. To validate the proposed solution, simulations were performed in six different environments, outdoors and indoors, and with different layout characteristics. The obtained results demonstrate the effectiveness of thesystemin the construction, sharing, and merging of maps. Still, from the obtained results, the extreme complexity of map merging systems is highlighted.Os veículos aéreos não tripulados (VANTs) têm sidoamplamenteutilizados em muitas aplicações devido, entre outrosrecursos,à sua versatilidade, custo de operação e tamanho reduzidos. Essas aplicações exigem cadavez mais que recursos relacionados à navegaçãoautônoma sejam empregados,como o mapeamento. No entanto, acapacidade reduzida de recursos como, por exemplo, bateria e hardware (memória e capacidade de processamento) podem atrapalhar o desenvolvimento dessas aplicações em VANTs.Assim, o uso colaborativo de múltiplosVANTs para mapeamento pode ser utilizado como uma alternativa para resolvereste problema, criando um sistema de navegaçãocooperativo. Estesistema requer que mapas locais individuais sejam transmitidos efundidos em um mapa global de forma distribuída.Nesse cenário, há doisproblemas principais aserem abordados:a transmissão dosmapas entre os VANTs e afusão dos mapas locais em cada VANT. Nestecontexto, estatese apresentao projeto, desenvolvimento e avaliaçãode um sistema de navegação cooperativo com arquitetura distribuída para ser utilizado pormúltiplos VANTs. Este sistemausa estruturas propostas para armazenaros mapasdegradedeocupação 3D. Além disso, os mapas são compactados e transmitidos entre os VANTs usando os algoritmos propostos. Em seguida, os mapas 3D locais são fundidos em cada VANT. Neste sistemade fusão de mapas, os mapas são processados antes e juntados em pares usando algunsalgoritmos adequados para torná-los compatíveiscom os dados dos mapas da grade de ocupação 3D. Além disso, as propriedadesde orientação dos pontoschave são obtidas a partir de gradientes de campos potenciais. Alguns filtros propostos são utilizadospara melhorar as indicações dos parâmetros dastransformações entre mapas. Paravalidar a aplicação proposta, foram realizadas simulações em seis ambientes distintos, externos e internos, e com características construtivas distintas. Os resultados apresentados demonstram a efetividade do sistema na construção, compartilhamento e fusão dos mapas. Ainda, a partir dos resultados obtidos, destaca-se a extrema complexidade dos sistemas de fusão de mapas