AirSync: Enabling Distributed Multiuser MIMO with Full Spatial Multiplexing

The enormous success of advanced wireless devices is pushing the demand for higher wireless data rates. Denser spectrum reuse through the deployment of more access points per square mile has the potential to successfully meet the increasing demand for more bandwidth. In theory, the best approach to density increase is via distributed multiuser MIMO, where several access points are connected to a central server and operate as a large distributed multi-antenna access point, ensuring that all transmitted signal power serves the purpose of data transmission, rather than creating "interference." In practice, while enterprise networks offer a natural setup in which distributed MIMO might be possible, there are serious implementation difficulties, the primary one being the need to eliminate phase and timing offsets between the jointly coordinated access points. In this paper we propose AirSync, a novel scheme which provides not only time but also phase synchronization, thus enabling distributed MIMO with full spatial multiplexing gains. AirSync locks the phase of all access points using a common reference broadcasted over the air in conjunction with a Kalman filter which closely tracks the phase drift. We have implemented AirSync as a digital circuit in the FPGA of the WARP radio platform. Our experimental testbed, comprised of two access points and two clients, shows that AirSync is able to achieve phase synchronization within a few degrees, and allows the system to nearly achieve the theoretical optimal multiplexing gain. We also discuss MAC and higher layer aspects of a practical deployment. To the best of our knowledge, AirSync offers the first ever realization of the full multiuser MIMO gain, namely the ability to increase the number of wireless clients linearly with the number of jointly coordinated access points, without reducing the per client rate.Comment: Submitted to Transactions on Networkin

Development of a synthetic aperture radar design approach for wide-swath implementation

The first phase of a study program to develop an advanced synthetic aperture radar design concept is presented. Attributes of particular importance for the system design include wide swath coverage, reduced power requirements, and versatility in the selection of frequency, polarization and incident angle. The multiple beam configuration provides imaging at a nearly constant angle of incidence and offers the potential of realizing a wide range of the attributes desired for an orbital imaging radar for Earth resources applications

The Deep Space Network: A Radio Communications Instrument for Deep Space Exploration

The primary purpose of the Deep Space Network (DSN) is to serve as a communications instrument for deep space exploration, providing communications between the spacecraft and the ground facilities. The uplink communications channel provides instructions or commands to the spacecraft. The downlink communications channel provides command verification and spacecraft engineering and science instrument payload data

Physical waveform research for beyond 52.6 GHz in 5G NR networks

Historically, in order to fulfil all the requirements for the new generations, the frequency bands have been expanded from generation to generation. In particular for the fifth generation new radio (5G NR), where the use of millimetre wave (mmWave) frequencies can offer higher bandwidths, communications in frequencies beyond 52.6 GHz seem really promising and are now under discussion in the 3rd Generation Partnership Project (3GPP) standardisation for the 5G NR future releases. More concretely, both academia and industry are doing research for the frequency range between 52.6 GHz and 114.25 GHz. The reasons why communications beyond 52.6 GHz are interesting is because in those frequencies, high data rate and low latency can be provided due to the large and contiguous channel bandwidth that is available. Also, new use cases can be explored in this frequency range since high accuracy positioning is possible at higher carrier frequencies, such as Orthogonal Frequency Division Multiplexing (OFDM) radar sensing, that allows new kinds of services. New challenges appear at higher frequencies, or other implementation issues that were not critical in lower frequencies start to become dominant and have to be taken into consideration while defining the new modulations and comparing the possible candidates. The main problems that have to be faced at higher frequencies are the poor propagation conditions (propagation losses are higher than in frequencies below 52.6 GHz), and the radio frequency (RF) impairments that electronic components may have, especially the lower power amplifier (PA) efficiency. Therefore, in order to have a good signal quality, if the peak to average power ratio (PAPR) of the original signal is high, the back-off should be high to make the PA work in the linear region. Thus, the waveform design has to be focused on generating signals with “nearly constant” envelope in order to be able to work closer to the saturation zone of the amplifier without distorting the signal. Also, another problem that has to be taken into account is the large phase noise (PN) present at these frequencies. The main goal of this work is the comparison between different modulations for discrete Fourier transform (DFT) Spread OFDM (DFTs-OFDM) in order to find a suitable candidate that can be part of the 5G NR communications for carrier frequencies beyond 52.6 GHz, and targeting specially low spectral efficiency (between 1 and 2 bps/Hz). Therefore, the main modulation references are pulse shaped π/2- binary phase shift keying (BPSK) and quadrature phase shift keying (QPSK) supported in 5G NR Release 15 up link (UL). In this Thesis, several modulation candidates have been tested under realistic conditions by using a 3GPP 5G NR compliant radio link simulator in Matlab. In order to find the best candidate, the waveforms should be able to present good characteristics that can overcome the problems present in mmWave communications. The main contribution of this thesis is to propose a new "constrained" phase shift keying (PSK) modulation, called CPSK, which applies a constraint to the symbols that are transmitted in order to reduce the PAPR of the signal. The results have shown that under the mmWave communications conditions (such as low PA efficiency and high PN), the new CPSK modulations can provide significant improvement with the evaluated PA model when compared to QPSK modulation, and together with extensive link level performance evaluations, a clear link budget gain can also be shown for specific CPSK modulation candidates and pulse shaped π/2-BPSK

Opportunistic communications in large uncoordinated networks

(English) The increase of wireless devices offering high data rate services limits the coexistence of wireless systems sharing the same resources in a given geographical area because of inter-system interference. Therefore, interference management plays a key role in permitting the coexistence of several heterogeneous communication services. However, classical interference management strategies require lateral information giving rise to the need for inter-system coordination and cooperation, which is not always practical. Opportunistic communications offer a potential solution to the problem of inter-system interference management. The basic principle of opportunistic communications is to efficiently and robustly exploit the resources available in a wireless network and adapt the transmitted signals to the state of the network to avoid inter-system interference. Therefore, opportunistic communications depend on inferring the available network resources that can be safely exploited without inducing interference in coexisting communication nodes. Once the available network resources are identified, the most prominent opportunistic communication techniques consist in designing scenario-adapted precoding/decoding strategies to exploit the so-called null space. Despite this, classical solutions in the literature suffer from two main drawbacks: the lack of robustness to detection errors and the need for intra-system cooperation. This thesis focuses on the design of a null space-based opportunistic communication scheme that addresses the drawbacks exhibited by existing methodologies under the assumption that opportunistic nodes do not cooperate. For this purpose, a generalized detection error model independent of the null-space identification mechanism is introduced that allows the design of solutions that exhibit minimal inter-system interference in the worst case. These solutions respond to a maximum signal-to-interference ratio (SIR) criterion, which is optimal under non-cooperative conditions. The proposed methodology allows the design of a family of orthonormal waveforms that perform a spreading of the modulated symbols within the detected null space, which is key to minimizing the induced interference density. The proposed solutions are invariant within the inferred null space, allowing the removal of the feedback link without giving up coherent waveform detection. In the absence of coordination, the waveform design relies solely on locally sensed network state information, inducing a mismatch between the null spaces identified by the transmitter and receiver that may worsen system performance. Although the proposed solution is robust to this mismatch, the design of enhanced receivers using active subspace detection schemes is also studied. When the total number of network resources increases arbitrarily, the proposed solutions tend to be linear combinations of complex exponentials, providing an interpretation in the frequency domain. This asymptotic behavior allows us to adapt the proposed solution to frequency-selective channels by means of a cyclic prefix and to study an efficient modulation similar to the time division multiplexing scheme but using circulant waveforms. Finally, the impact of the use of multiple antennas in opportunistic null space-based communications is studied. The performed analysis reveals that, in any case, the structure of the antenna clusters affects the opportunistic communication, since the proposed waveform mimics the behavior of a single-antenna transmitter. On the other hand, the number of sensors employed translates into an improvement in terms of SIR.(Català) El creixement incremental dels dispositius sense fils que requereixen serveis d'alta velocitat de dades limita la coexistència de sistemes sense fils que comparteixen els mateixos recursos en una àrea geogràfica donada a causa de la interferència entre sistemes. Conseqüentment, la gestió d'interferència juga un paper fonamental per a facilitar la coexistència de diversos serveis de comunicació heterogenis. No obstant això, les estratègies clàssiques de gestió d'interferència requereixen informació lateral originant la necessitat de coordinació i cooperació entre sistemes, que no sempre és pràctica. Les comunicacions oportunistes ofereixen una solució potencial al problema de la gestió de les interferències entre sistemes. El principi bàsic de les comunicacions oportunistes és explotar de manera eficient i robusta els recursos disponibles en una xarxa sense fils i adaptar els senyals transmesos a l'estat de la xarxa per evitar interferències entre sistemes. Per tant, les comunicacions oportunistes depenen de la inferència dels recursos de xarxa disponibles que poden ser explotats de manera segura sense induir interferència en els nodes de comunicació coexistents. Una vegada que s'han identificat els recursos de xarxa disponibles, les tècniques de comunicació oportunistes més prominents consisteixen en el disseny d'estratègies de precodificació/descodificació adaptades a l'escenari per explotar l'anomenat espai nul. Malgrat això, les solucions clàssiques en la literatura sofreixen dos inconvenients principals: la falta de robustesa als errors de detecció i la necessitat de cooperació intra-sistema. Aquesta tesi tracta el disseny d'un esquema de comunicació oportunista basat en l'espai nul que afronta els inconvenients exposats per les metodologies existents assumint que els nodes oportunistes no cooperen. Per a aquest propòsit, s'introdueix un model generalitzat d'error de detecció independent del mecanisme d'identificació de l'espai nul que permet el disseny de solucions que exhibeixen interferències mínimes entre sistemes en el cas pitjor. Aquestes solucions responen a un criteri de màxima relació de senyal a interferència (SIR), que és òptim en condicions de no cooperació. La metodologia proposada permet dissenyar una família de formes d'ona ortonormals que realitzen un spreading dels símbols modulats dins de l'espai nul detectat, que és clau per minimitzar la densitat d’interferència induïda. Les solucions proposades són invariants dins de l'espai nul inferit, permetent suprimir l'enllaç de retroalimentació i, tot i així, realitzar una detecció coherent de forma d'ona. Sota l’absència de coordinació, el disseny de la forma d'ona es basa únicament en la informació de l'estat de la xarxa detectada localment, induint un desajust entre els espais nuls identificats pel transmissor i receptor que pot empitjorar el rendiment del sistema. Tot i que la solució proposada és robusta a aquest desajust, també s'estudia el disseny de receptors millorats fent ús de tècniques de detecció de subespai actiu. Quan el nombre total de recursos de xarxa augmenta arbitràriament, les solucions proposades tendeixen a ser combinacions lineals d'exponencials complexes, proporcionant una interpretació en el domini freqüencial. Aquest comportament asimptòtic permet adaptar la solució proposada a entorns selectius en freqüència fent ús d'un prefix cíclic i estudiar una modulació eficient derivada de l'esquema de multiplexat per divisió de temps emprant formes d'ona circulant. Finalment, s’estudia l'impacte de l'ús de múltiples antenes en comunicacions oportunistes basades en l'espai nul. L'anàlisi realitzada permet concloure que, en cap cas, l'estructura de les agrupacions d'antenes tenen un impacte sobre la comunicació oportunista, ja que la forma d'ona proposada imita el comportament d'un transmissor mono-antena. D'altra banda, el nombre de sensors emprat es tradueix en una millora en termes de SIR.(Español) El incremento de los dispositivos inalámbricos que ofrecen servicios de alta velocidad de datos limita la coexistencia de sistemas inalámbricos que comparten los mismos recursos en un área geográfica dada a causa de la interferencia inter-sistema. Por tanto, la gestión de interferencia juega un papel fundamental para facilitar la coexistencia de varios servicios de comunicación heterogéneos. Sin embargo, las estrategias clásicas de gestión de interferencia requieren información lateral originando la necesidad de coordinación y cooperación entre sistemas, que no siempre es práctica. Las comunicaciones oportunistas ofrecen una solución potencial al problema de la gestión de las interferencias entre sistemas. El principio básico de las comunicaciones oportunistas es explotar de manera eficiente y robusta los recursos disponibles en una red inalámbricas y adaptar las señales transmitidas al estado de la red para evitar interferencias entre sistemas. Por lo tanto, las comunicaciones oportunistas dependen de la inferencia de los recursos de red disponibles que pueden ser explotados de manera segura sin inducir interferencia en los nodos de comunicación coexistentes. Una vez identificados los recursos disponibles, las técnicas de comunicación oportunistas más prominentes consisten en el diseño de estrategias de precodificación/descodificación adaptadas al escenario para explotar el llamado espacio nulo. A pesar de esto, las soluciones clásicas en la literatura sufren dos inconvenientes principales: la falta de robustez a los errores de detección y la necesidad de cooperación intra-sistema. Esta tesis propone diseñar un esquema de comunicación oportunista basado en el espacio nulo que afronta los inconvenientes expuestos por las metodologías existentes asumiendo que los nodos oportunistas no cooperan. Para este propósito, se introduce un modelo generalizado de error de detección independiente del mecanismo de identificación del espacio nulo que permite el diseño de soluciones que exhiben interferencias mínimas entre sistemas en el caso peor. Estas soluciones responden a un criterio de máxima relación de señal a interferencia (SIR), que es óptimo en condiciones de no cooperación. La metodología propuesta permite diseñar una familia de formas de onda ortonormales que realizan un spreading de los símbolos modulados dentro del espacio nulo detectado, que es clave para minimizar la densidad de interferencia inducida. Las soluciones propuestas son invariantes dentro del espacio nulo inferido, permitiendo suprimir el enlace de retroalimentación sin renunciar a la detección coherente de forma de onda. En ausencia de coordinación, el diseño de la forma de onda se basa únicamente en la información del estado de la red detectada localmente, induciendo un desajuste entre los espacios nulos identificados por el transmisor y receptor que puede empeorar el rendimiento del sistema. A pesar de que la solución propuesta es robusta a este desajuste, también se estudia el diseño de receptores mejorados usando técnicas de detección de subespacio activo. Cuando el número total de recursos de red aumenta arbitrariamente, las soluciones propuestas tienden a ser combinaciones lineales de exponenciales complejas, proporcionando una interpretación en el dominio frecuencial. Este comportamiento asintótico permite adaptar la solución propuesta a canales selectivos en frecuencia mediante un prefijo cíclico y estudiar una modulación eficiente derivada del esquema de multiplexado por división de tiempo empleando formas de onda circulante. Finalmente, se estudia el impacto del uso de múltiples antenas en comunicaciones oportunistas basadas en el espacio nulo. El análisis realizado revela que la estructura de las agrupaciones de antenas no afecta la comunicación oportunista, ya que la forma de onda propuesta imita el comportamiento de un transmisor mono-antena. Por otro lado, el número de sensores empleado se traduce en una mejora en términos de SIR.Postprint (published version

A Vector Channel Based Approach to MIMO Radar Waveform Design for Extended Targets

Radar systems have been used for many years for estimating, detecting, classifying, and imaging objects of interest (targets). Stealthier targets and more cluttered environments have created a need for more sophisticated radar systems to gain more precise information about the radar environment. Because modern radar systems are largely defined in software, adaptive radar systems have emerged that tailor system parameters such as the transmitted waveform and receiver filter to the target and environment in order to address this need. The basic structure of a radar system exhibits many similarities to the structure of a communication system. Recognizing the parallel composition of radar systems and information transmission systems, initial works have begun to explore the application of information theory to radar system design, but a great deal of work still remains to make a full and clear connection between the problems addressed by radar systems and communication systems. Forming a comprehensive definition of this connection between radar systems and information transmission systems and associated problem descriptions could facilitate the cross-discipline transfer of ideas and accelerate the development and improvement of new system design solutions in both fields. In particular, adaptive radar system design is a relatively new field which stands to benefit from the maturity of information theory developed for information transmission if a parallel can be drawn to clearly relate similar radar and communication problems. No known previous work has yet drawn a clear parallel between the general multiple-input multiple-output (MIMO) radar system model considering both the detection and estimation of multiple extended targets and a similar multiuser vector channel information transmission system model. The goal of this dissertation is to develop a novel vector channel framework to describe a MIMO radar system and to study information theoretic adaptive radar waveform design for detection and estimation of multiple radar targets within this framework. Specifically, this dissertation first provides a new compact vector channel model for representing a MIMO radar system which illustrates the parallel composition of radar systems and information transmission systems. Second, using the proposed framework this dissertation contributes a compressed sensing based information theoretic approach to waveform design for the detection of multiple extended targets in noiseless and noisy scenarios. Third, this dissertation defines the multiple extended target estimation problem within the framework and proposes a greedy signal to interference-plus-noise ratio (SINR) maximizing procedure based on a similar approach developed for a collaborative multibase wireless communication system to optimally design wave forms in this scenario

Adaptive OFDM Radar for Target Detection and Tracking

We develop algorithms to detect and track targets by employing a wideband orthogonal frequency division multiplexing: OFDM) radar signal. The frequency diversity of the OFDM signal improves the sensing performance since the scattering centers of a target resonate variably at different frequencies. In addition, being a wideband signal, OFDM improves the range resolution and provides spectral efficiency. We first design the spectrum of the OFDM signal to improve the radar\u27s wideband ambiguity function. Our designed waveform enhances the range resolution and motivates us to use adaptive OFDM waveform in specific problems, such as the detection and tracking of targets. We develop methods for detecting a moving target in the presence of multipath, which exist, for example, in urban environments. We exploit the multipath reflections by utilizing different Doppler shifts. We analytically evaluate the asymptotic performance of the detector and adaptively design the OFDM waveform, by maximizing the noncentrality-parameter expression, to further improve the detection performance. Next, we transform the detection problem into the task of a sparse-signal estimation by making use of the sparsity of multiple paths. We propose an efficient sparse-recovery algorithm by employing a collection of multiple small Dantzig selectors, and analytically compute the reconstruction performance in terms of the $ell_1$-constrained minimal singular value. We solve a constrained multi-objective optimization algorithm to design the OFDM waveform and infer that the resultant signal-energy distribution is in proportion to the distribution of the target energy across different subcarriers. Then, we develop tracking methods for both a single and multiple targets. We propose an tracking method for a low-grazing angle target by realistically modeling different physical and statistical effects, such as the meteorological conditions in the troposphere, curved surface of the earth, and roughness of the sea-surface. To further enhance the tracking performance, we integrate a maximum mutual information based waveform design technique into the tracker. To track multiple targets, we exploit the inherent sparsity on the delay-Doppler plane to develop an computationally efficient procedure. For computational efficiency, we use more prior information to dynamically partition a small portion of the delay-Doppler plane. We utilize the block-sparsity property to propose a block version of the CoSaMP algorithm in the tracking filter