Complex railway systems: capacity and utilisation of interconnected networks

Introduction Worldwide the transport sector faces several issues related to the rising of traffic demand such as congestion, energy consumption, noise, pollution, safety, etc. Trying to stem the problem, the European Commission is encouraging a modal shift towards railway, considered as one of the key factors for the development of a more sustainable European transport system. The coveted increase in railway share of transport demand for the next decades and the attempt to open up the rail market (for freight, international and recently also local services) strengthen the attention to capacity usage of the system. This contribution proposes a synthetic methodology for the capacity and utilisation analysis of complex interconnected rail networks; the procedure has a dual scope since it allows both a theoretically robust examination of suburban rail systems and a solid approach to be applied, with few additional and consistent assumptions, for feasibility or strategic analysis of wide networks (by efficiently exploiting the use of Big Data and/or available Open Databases). Method In particular the approach proposes a schematization of typical elements of a rail network (stations and line segments) to be applied in case of lack of more detailed data; in the authors’ opinion the strength points of the presented procedure stem from the flexibility of the applied synthetic methods and from the joint analysis of nodes and lines. The article, after building a quasiautomatic model to carry out several analyses by changing the border conditions or assumptions, even presents some general abacuses showing the variability of capacity/utilization of the network’s elements in function of basic parameters. Results This has helped in both the presented case studies: one focuses on a detailed analysis of the Naples’ suburban node, while the other tries to broaden the horizon by examining the whole European rail network with a more specific zoom on the Belgium area. The first application shows how the procedure can be applied in case of availability of fine-grained data and for metropolitan/regional analysis, allowing a precise detection of possible bottlenecks in the system and the individuation of possible interventions to relieve the high usage rate of these elements. The second application represents an on-going attempt to provide a broad analysis of capacity and related parameters for the entire European railway system. It explores the potentiality of the approach and the possible exploitation of different ‘Open and Big Data’ sources, but the outcomes underline the necessity to rely on proper and adequate information; the accuracy of the results significantly depend on the design and precision of the input database. Conclusion In conclusion, the proposed methodology aims to evaluate capacity and utilisation rates of rail systems at different geographical scales and according to data availability; the outcomes might provide valuable information to allow efficient exploitation and deployment of railway infrastructure, better supporting policy (e.g. investment prioritization, rail infrastructure access charges) and helping to minimize costs for users.The presented case studies show that the method allows indicative evaluations on the use of the system and comparative analysis between different elementary components, providing a first identification of ‘weak’ links or nodes for which, then, specific and detailed analyses should be carried out, taking into account more in depth their actual configuration, the technical characteristics and the real composition of the traffic (i.e. other elements influencing the rail capacity, such as: the adopted operating systems, the station traffic/route control & safety system, the elastic release of routes, the overlap of block sections, etc.)

Research and innovation in smart mobility and services in Europe: An assessment based on the Transport Research and Innovation Monitoring and Information System (TRIMIS)

For smart mobility to be cost-efficient and ready for future needs, adequate research and innovation (R&I) in this field is necessary. This report provides a comprehensive analysis of R&I in smart mobility and services in Europe. The assessment follows the methodology developed by the European Commission’s Transport Research and Innovation Monitoring and Information System (TRIMIS). The report critically assesses research by thematic area and technologies, highlighting recent developments and future needs.JRC.C.4-Sustainable Transpor

Performance assessment of urban precinct design: a scoping study

Executive Summary: Significant advances have been made over the past decade in the development of scientifically and industry accepted tools for the performance assessment of buildings in terms of energy, carbon, water, indoor environment quality etc. For resilient, sustainable low carbon urban development to be realised in the 21st century, however, will require several radical transitions in design performance beyond the scale of individual buildings. One of these involves the creation and application of leading edge tools (not widely available to built environment professions and practitioners) capable of being applied to an assessment of performance across all stages of development at a precinct scale (neighbourhood, community and district) in either greenfield, brownfield or greyfield settings. A core aspect here is the development of a new way of modelling precincts, referred to as Precinct Information Modelling (PIM) that provides for transparent sharing and linking of precinct object information across the development life cycle together with consistent, accurate and reliable access to reference data, including that associated with the urban context of the precinct. Neighbourhoods are the ‘building blocks’ of our cities and represent the scale at which urban design needs to make its contribution to city performance: as productive, liveable, environmentally sustainable and socially inclusive places (COAG 2009). Neighbourhood design constitutes a major area for innovation as part of an urban design protocol established by the federal government (Department of Infrastructure and Transport 2011, see Figure 1). The ability to efficiently and effectively assess urban design performance at a neighbourhood level is in its infancy. This study was undertaken by Swinburne University of Technology, University of New South Wales, CSIRO and buildingSMART Australasia on behalf of the CRC for Low Carbon Living

Assessment of the Conditions for a European Union Location Framework Report EUR

The European Union Location Framework (EULF) is a set of good practices and actions to promote more effective and efficient use of location information in e-government services. The EULF is part of the Interoperability Solutions for Public Administrations (ISA) Programme, which supports interoperability solutions, sharing and re-use among European Public Administrations. This report assesses the conditions for an EULF, based on a survey of Member States and an examination of EU policies and work programmes. Five focus areas are being considered initially: policy and strategy alignment, e government integration, standardisation and interoperbility, costs and benefits and committed partnerships. The assessment confirmed their importance in realising and maximising the benefits of location-related information and services. There are various good practices demonstrating that these issues can be addressed and that benefits for governments, citizens and businesses can be delivered. However these good pratices are not universally deployed and there are some significant gaps. The assessment also identified other important issues, including the need for effective leadership and governance, a user-driven approach, an open and balanced data policy, training and awareness raising and appropriately targeted funding. There is, therefore, a need for an EULF, to build on the good practices and interest from Member States and to develop a framework of guidance and actions that will foster interoperable cross-sector and cross-border sharing and use of location information.JRC.H.6-Digital Earth and Reference Dat