A COMPARISON OF HAZE REMOVAL ALGORITHMS AND THEIR IMPACTS ON CLASSIFICATION ACCURACY FOR LANDSAT IMAGERY

The quality of Landsat images in humid areas is considerably degraded by haze in terms of their spectral response pattern, which limits the possibility of their application in using visible and near-infrared bands. A variety of haze removal algorithms have been proposed to correct these unsatisfactory illumination effects caused by the haze contamination. The purpose of this study was to illustrate the difference of two major algorithms (the improved homomorphic filtering (HF) and the virtual cloud point (VCP)) for their effectiveness in solving spatially varying haze contamination, and to evaluate the impacts of haze removal on land cover classification. A case study with exploiting large quantities of Landsat TM images and climates (clear and haze) in the most humid areas in China proved that these haze removal algorithms both perform well in processing Landsat images contaminated by haze. The outcome of the application of VCP appears to be more similar to the reference images compared to HF. Moreover, the Landsat image with VCP haze removal can improve the classification accuracy effectively in comparison to that without haze removal, especially in the cloudy contaminated area

Framework to Create Cloud-Free Remote Sensing Data Using Passenger Aircraft as the Platform

Cloud removal in optical remote sensing imagery is essential for many Earth observation applications.Due to the inherent imaging geometry features in satellite remote sensing, it is impossible to observe the ground under the clouds directly; therefore, cloud removal algorithms are always not perfect owing to the loss of ground truth. Passenger aircraft have the advantages of short visitation frequency and low cost. Additionally, because passenger aircraft fly at lower altitudes compared to satellites, they can observe the ground under the clouds at an oblique viewing angle. In this study, we examine the possibility of creating cloud-free remote sensing data by stacking multi-angle images captured by passenger aircraft. To accomplish this, a processing framework is proposed, which includes four main steps: 1) multi-angle image acquisition from passenger aircraft, 2) cloud detection based on deep learning semantic segmentation models, 3) cloud removal by image stacking, and 4) image quality enhancement via haze removal. This method is intended to remove cloud contamination without the requirements of reference images and pre-determination of cloud types. The proposed method was tested in multiple case studies, wherein the resultant cloud- and haze-free orthophotos were visualized and quantitatively analyzed in various land cover type scenes. The results of the case studies demonstrated that the proposed method could generate high quality, cloud-free orthophotos. Therefore, we conclude that this framework has great potential for creating cloud-free remote sensing images when the cloud removal of satellite imagery is difficult or inaccurate

Multispectral pansharpening with radiative transfer-based detail-injection modeling for preserving changes in vegetation cover

Whenever vegetated areas are monitored over time, phenological changes in land cover should be decoupled from changes in acquisition conditions, like atmospheric components, Sun and satellite heights and imaging instrument. This especially holds when the multispectral (MS) bands are sharpened for spatial resolution enhancement by means of a panchromatic (Pan) image of higher resolution, a process referred to as pansharpening. In this paper, we provide evidence that pansharpening of visible/near-infrared (VNIR) bands takes advantage of a correction of the path radiance term introduced by the atmosphere, during the fusion process. This holds whenever the fusion mechanism emulates the radiative transfer model ruling the acquisition of the Earth's surface from space, that is for methods exploiting a multiplicative, or contrast-based, injection model of spatial details extracted from the panchromatic (Pan) image into the interpolated multispectral (MS) bands. The path radiance should be estimated and subtracted from each band before the product by Pan is accomplished. Both empirical and model-based estimation techniques of MS path radiances are compared within the framework of optimized algorithms. Simulations carried out on two GeoEye-1 observations of the same agricultural landscape on different dates highlight that the de-hazing of MS before fusion is beneficial to an accurate detection of seasonal changes in the scene, as measured by the normalized differential vegetation index (NDVI)

HAZE REMOVAL IN THE VISIBLE BANDS OF LANDSAT 8 OLI OVER SHALLOW WATER AREA

Haze is one of radiometric quality parameters in remote sensing imagery. With certain atmospheric correction, haze is possible to be removed. Nevertheless, an efficient method for haze removal is still a challenge. Many methods have been developed to remove or to minimize the haze disruption. While most of the developed methods deal with removing haze over land areas, this paper tried to focus to remove haze from shallow water areas. The method presented in this paper is a simple subtraction algorithm between a band that reflected by water and a band that absorbed by water. This paper used data from Landsat 8 with visible bands as a band that reflected by water while the band that absorbed by water represented by NIR, SWIR-1, and SWIR-2 bands. To validate the method, a reference data which relatively clear of cloud and haze contamination is selected. The pixel numbers from certain points are selected and collected from data scene, results scene and reference scene. Those pixel numbers, then being compared each other to get a correlation number between data scene to reference scene and between result scene and reference scene. The comparison shows that the method using NIR, SWIR-1, and SWIR-2 all significantly improved correlations numbers between result scene with reference scene to higher than 0.9. The comparison also indicates that haze removal result using NIR band had the highest correlation with reference data.

Development of cloud removal and land cover Change extraction algorithms for remotely-sensed Landsat imagery

Land cover change monitoring requires the analysis of remotely-sensed data. In the tropics this is difficult because of persistent cloud cover, and data availability. This research focuses on the elimination of cloud cover as an important step towards addressing the issue of change detection. The result produced clearer images, whereas some persistent cloud remains. This persistent cloud and the cloud adjacency effects diminish the quality of image product and affect the change detection quality

Multi-feature combined cloud and cloud shadow detection in GaoFen-1 wide field of view imagery

The wide field of view (WFV) imaging system onboard the Chinese GaoFen-1 (GF-1) optical satellite has a 16-m resolution and four-day revisit cycle for large-scale Earth observation. The advantages of the high temporal-spatial resolution and the wide field of view make the GF-1 WFV imagery very popular. However, cloud cover is an inevitable problem in GF-1 WFV imagery, which influences its precise application. Accurate cloud and cloud shadow detection in GF-1 WFV imagery is quite difficult due to the fact that there are only three visible bands and one near-infrared band. In this paper, an automatic multi-feature combined (MFC) method is proposed for cloud and cloud shadow detection in GF-1 WFV imagery. The MFC algorithm first implements threshold segmentation based on the spectral features and mask refinement based on guided filtering to generate a preliminary cloud mask. The geometric features are then used in combination with the texture features to improve the cloud detection results and produce the final cloud mask. Finally, the cloud shadow mask can be acquired by means of the cloud and shadow matching and follow-up correction process. The method was validated using 108 globally distributed scenes. The results indicate that MFC performs well under most conditions, and the average overall accuracy of MFC cloud detection is as high as 96.8%. In the contrastive analysis with the official provided cloud fractions, MFC shows a significant improvement in cloud fraction estimation, and achieves a high accuracy for the cloud and cloud shadow detection in the GF-1 WFV imagery with fewer spectral bands. The proposed method could be used as a preprocessing step in the future to monitor land-cover change, and it could also be easily extended to other optical satellite imagery which has a similar spectral setting.Comment: This manuscript has been accepted for publication in Remote Sensing of Environment, vol. 191, pp.342-358, 2017. (http://www.sciencedirect.com/science/article/pii/S003442571730038X

Convolutional Deblurring for Natural Imaging

In this paper, we propose a novel design of image deblurring in the form of one-shot convolution filtering that can directly convolve with naturally blurred images for restoration. The problem of optical blurring is a common disadvantage to many imaging applications that suffer from optical imperfections. Despite numerous deconvolution methods that blindly estimate blurring in either inclusive or exclusive forms, they are practically challenging due to high computational cost and low image reconstruction quality. Both conditions of high accuracy and high speed are prerequisites for high-throughput imaging platforms in digital archiving. In such platforms, deblurring is required after image acquisition before being stored, previewed, or processed for high-level interpretation. Therefore, on-the-fly correction of such images is important to avoid possible time delays, mitigate computational expenses, and increase image perception quality. We bridge this gap by synthesizing a deconvolution kernel as a linear combination of Finite Impulse Response (FIR) even-derivative filters that can be directly convolved with blurry input images to boost the frequency fall-off of the Point Spread Function (PSF) associated with the optical blur. We employ a Gaussian low-pass filter to decouple the image denoising problem for image edge deblurring. Furthermore, we propose a blind approach to estimate the PSF statistics for two Gaussian and Laplacian models that are common in many imaging pipelines. Thorough experiments are designed to test and validate the efficiency of the proposed method using 2054 naturally blurred images across six imaging applications and seven state-of-the-art deconvolution methods.Comment: 15 pages, for publication in IEEE Transaction Image Processin