NASA Tech Briefs, January 2009

Tech Briefs are short announcements of innovations originating from research and development activities of the National Aeronautics and Space Administration. They emphasize information considered likely to be transferable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. Topics covered include: The Radio Frequency Health Node Wireless Sensor System; Effects of Temperature on Polymer/Carbon Chemical Sensors; Small CO2 Sensors Operate at Lower Temperature; Tele-Supervised Adaptive Ocean Sensor Fleet; Synthesis of Submillimeter Radiation for Spectroscopy; 100-GHz Phase Switch/Mixer Containing a Slot-Line Transition; Generating Ka-Band Signals Using an X-Band Vector Modulator; SiC Optically Modulated Field-Effect Transistor; Submillimeter-Wave Amplifier Module with Integrated Waveguide Transitions; Metrology System for a Large, Somewhat Flexible Telescope; Economical Implementation of a Filter Engine in an FPGA; Improved Joining of Metal Components to Composite Structures; Machined Titanium Heat-Pipe Wick Structure; Gadolinia-Doped Ceria Cathodes for Electrolysis of CO2; Utilizing Ocean Thermal Energy in a Submarine Robot; Fuel-Cell Power Systems Incorporating Mg-Based H2 Generators; Alternative OTEC Scheme for a Submarine Robot; Sensitive, Rapid Detection of Bacterial Spores; Adenosine Monophosphate-Based Detection of Bacterial Spores; Silicon Microleaks for Inlets of Mass Spectrometers; CGH Figure Testing of Aspherical Mirrors in Cold Vacuums; Series-Coupled Pairs of Silica Microresonators; Precise Stabilization of the Optical Frequency of WGMRs; Formation Flying of Components of a Large Space Telescope; Laser Metrology Heterodyne Phase-Locked Loop; Spatial Modulation Improves Performance in CTIS; High-Performance Algorithm for Solving the Diagnosis Problem; Truncation Depth Rule-of-Thumb for Convolutional Codes; Efficient Method for Optimizing Placement of Sensors

2020 NASA Technology Taxonomy

This document is an update (new photos used) of the PDF version of the 2020 NASA Technology Taxonomy that will be available to download on the OCT Public Website. The updated 2020 NASA Technology Taxonomy, or "technology dictionary", uses a technology discipline based approach that realigns like-technologies independent of their application within the NASA mission portfolio. This tool is meant to serve as a common technology discipline-based communication tool across the agency and with its partners in other government agencies, academia, industry, and across the world

The NASA SBIR product catalog

The purpose of this catalog is to assist small business firms in making the community aware of products emerging from their efforts in the Small Business Innovation Research (SBIR) program. It contains descriptions of some products that have advanced into Phase 3 and others that are identified as prospective products. Both lists of products in this catalog are based on information supplied by NASA SBIR contractors in responding to an invitation to be represented in this document. Generally, all products suggested by the small firms were included in order to meet the goals of information exchange for SBIR results. Of the 444 SBIR contractors NASA queried, 137 provided information on 219 products. The catalog presents the product information in the technology areas listed in the table of contents. Within each area, the products are listed in alphabetical order by product name and are given identifying numbers. Also included is an alphabetical listing of the companies that have products described. This listing cross-references the product list and provides information on the business activity of each firm. In addition, there are three indexes: one a list of firms by states, one that lists the products according to NASA Centers that managed the SBIR projects, and one that lists the products by the relevant Technical Topics utilized in NASA's annual program solicitation under which each SBIR project was selected

MEMS Technology for Biomedical Imaging Applications

Biomedical imaging is the key technique and process to create informative images of the human body or other organic structures for clinical purposes or medical science. Micro-electro-mechanical systems (MEMS) technology has demonstrated enormous potential in biomedical imaging applications due to its outstanding advantages of, for instance, miniaturization, high speed, higher resolution, and convenience of batch fabrication. There are many advancements and breakthroughs developing in the academic community, and there are a few challenges raised accordingly upon the designs, structures, fabrication, integration, and applications of MEMS for all kinds of biomedical imaging. This Special Issue aims to collate and showcase research papers, short commutations, perspectives, and insightful review articles from esteemed colleagues that demonstrate: (1) original works on the topic of MEMS components or devices based on various kinds of mechanisms for biomedical imaging; and (2) new developments and potentials of applying MEMS technology of any kind in biomedical imaging. The objective of this special session is to provide insightful information regarding the technological advancements for the researchers in the community

PIC CONTROLLED ROBOTIC DEVICE DRIVE SYSTEM

The Final Year Project course is designed for students to perform research; design and development work in each discipline, to produce practical solutions. It provides opportunity for students to use the tools and techniques of problem-solving by engagement of the project. Under proper guidance of supervisor, the students will shape the direction in the field of interest as a preparation for approaching their desired career path in the near future, as well as gain better understanding of the responsibilities they have to shoulder when they undertake future projects. The objective ofthis project is to produce a storage/delivery autonomous robot which will operate ina production plant. The Scope of Study will cover areas of research done to fulfill design requirements ofproject with objective and its functionality. The areas of design requirements will include movement mechanism, electronic circuits, and programming. These subareas are developed and integrated for implementation ofthe workable robot. The project is divided into two phases; 1) intensive design research and 2) implementation and construction. Methodology and Project Work of this project is done by implementing a lot of research not only on the Internet but also literature review on scholars that have completed similar robotic design. The weekly Log Book and Progress Report is also compiled and summarized to present the author's progress so far. Consultation with supervisor and other FYP students had also aid in objective of completing the author's FYP. The author has also included flow chart ofactivities planned throughout the semester to ensure maximum progress ofher FYP. The research taken with the methodology mentioned allows the author to fulfill progress of design requirements planned in completion of the robot with reference to the scope of study for the project. Progress and modification made throughout project are discussed in detail, to reflect objective of project. Future improvisation and recommendations are also suggested atthe end for further research

NASA Tech Briefs, November 2002

Topics include: a technology focus on engineering materials, electronic components and systems, software, mechanics, machinery/automation, manufacturing, bio-medical, physical sciences, information sciences book and reports, and a special section of Photonics Tech Briefs

Towards Highly-Integrated Stereovideoscopy for \u3ci\u3ein vivo\u3c/i\u3e Surgical Robots

When compared to traditional surgery, laparoscopic procedures result in better patient outcomes: shorter recovery, reduced post-operative pain, and less trauma to incisioned tissue. Unfortunately, laparoscopic procedures require specialized training for surgeons, as these minimally-invasive procedures provide an operating environment that has limited dexterity and limited vision. Advanced surgical robotics platforms can make minimally-invasive techniques safer and easier for the surgeon to complete successfully. The most common type of surgical robotics platforms -- the laparoscopic robots -- accomplish this with multi-degree-of-freedom manipulators that are capable of a diversified set of movements when compared to traditional laparoscopic instruments. Also, these laparoscopic robots allow for advanced kinematic translation techniques that allow the surgeon to focus on the surgical site, while the robot calculates the best possible joint positions to complete any surgical motion. An important component of these systems is the endoscopic system used to transmit a live view of the surgical environment to the surgeon. Coupled with 3D high-definition endoscopic cameras, the entirety of the platform, in effect, eliminates the peculiarities associated with laparoscopic procedures, which allows less-skilled surgeons to complete minimally-invasive surgical procedures quickly and accurately. A much newer approach to performing minimally-invasive surgery is the idea of using in-vivo surgical robots -- small robots that are inserted directly into the patient through a single, small incision; once inside, an in-vivo robot can perform surgery at arbitrary positions, with a much wider range of motion. While laparoscopic robots can harness traditional endoscopic video solutions, these in-vivo robots require a fundamentally different video solution that is as flexible as possible and free of bulky cables or fiber optics. This requires a miniaturized videoscopy system that incorporates an image sensor with a transceiver; because of severe size constraints, this system should be deeply embedded into the robotics platform. Here, early results are presented from the integration of a miniature stereoscopic camera into an in-vivo surgical robotics platform. A 26mm X 24mm stereo camera was designed and manufactured. The proposed device features USB connectivity and 1280 X 720 resolution at 30 fps. Resolution testing indicates the device performs much better than similarly-priced analog cameras. Suitability of the platform for 3D computer vision tasks -- including stereo reconstruction -- is examined. The platform was also tested in a living porcine model at the University of Nebraska Medical Center. Results from this experiment suggest that while the platform performs well in controlled, static environments, further work is required to obtain usable results in true surgeries. Concluding, several ideas for improvement are presented, along with a discussion of core challenges associated with the platform. Adviser: Lance C. Pérez [Document = 28 Mb

NASA SBIR abstracts of 1990 phase 1 projects

The research objectives of the 280 projects placed under contract in the National Aeronautics and Space Administration (NASA) 1990 Small Business Innovation Research (SBIR) Phase 1 program are described. The basic document consists of edited, non-proprietary abstracts of the winning proposals submitted by small businesses in response to NASA's 1990 SBIR Phase 1 Program Solicitation. The abstracts are presented under the 15 technical topics within which Phase 1 proposals were solicited. Each project was assigned a sequential identifying number from 001 to 280, in order of its appearance in the body of the report. The document also includes Appendixes to provide additional information about the SBIR program and permit cross-reference in the 1990 Phase 1 projects by company name, location by state, principal investigator, NASA field center responsible for management of each project, and NASA contract number

A comparison of processing techniques for producing prototype injection moulding inserts.

This project involves the investigation of processing techniques for producing low-cost moulding inserts used in the particulate injection moulding (PIM) process. Prototype moulds were made from both additive and subtractive processes as well as a combination of the two. The general motivation for this was to reduce the entry cost of users when considering PIM. PIM cavity inserts were first made by conventional machining from a polymer block using the pocket NC desktop mill. PIM cavity inserts were also made by fused filament deposition modelling using the Tiertime UP plus 3D printer. The injection moulding trials manifested in surface finish and part removal defects. The feedstock was a titanium metal blend which is brittle in comparison to commodity polymers. That in combination with the mesoscale features, small cross-sections and complex geometries were considered the main problems. For both processing methods, fixes were identified and made to test the theory. These consisted of a blended approach that saw a combination of both the additive and subtractive processes being used. The parts produced from the three processing methods are investigated and their respective merits and issues are discussed

An intelligent multi-floor mobile robot transportation system in life science laboratories

In this dissertation, a new intelligent multi-floor transportation system based on mobile robot is presented to connect the distributed laboratories in multi-floor environment. In the system, new indoor mapping and localization are presented, hybrid path planning is proposed, and an automated doors management system is presented. In addition, a hybrid strategy with innovative floor estimation to handle the elevator operations is implemented. Finally the presented system controls the working processes of the related sub-system. The experiments prove the efficiency of the presented system