Putting energy back in control

A control system design technique using the principle of energy balancing was analyzed. Passivity-based control (PBC) techniques were used to analyze complex systems by decomposing them into simpler sub systems, which upon interconnection and total energy addition were helpful in determining the overall system behavior. An attempt to identify physical obstacles that hampered the use of PBC in applications other than mechanical systems was carried out. The technique was applicable to systems which were stabilized with passive controllers

Modeling, Identification, Validation and Control of a Hybrid Maglev Ball System

In this thesis, the electrodynamics of a single axis hybrid electromagnetic suspension Maglev system was modeled and validated by applying it to a single axis hybrid maglev ball experiment. By exploring its linearized model, it was shown that the single axis hybrid Maglev ball has inherently unstable dynamics. Three control scenarios were explored based on the linearized model; (1) Proportional, Deferential (PD) control, (2) Proportional, Deferential, Integral (PID) and (3) PID controller with pre-filtering. This thesis has shown that a PID controller with a pre-filtering technique can stabilize such a system and provide a well-controlled response. A parametric system identification technique was applied to fit the theoretically derived model to a single axis hybrid maglev ball experiment. It is known that the identified model has different model parameters than the theoretically derived parameters. This thesis has examined and discussed the deviation from the theoretical model. Importantly, it was shown that such a system can be identified by estimating the values of two parameters instead of five to increase the accuracy. A Numerical nonlinear simulation was developed for the experiment based on the theoretically derived and experimentally identified model. This simulation was validated by real-time experiment outputs

Design and semantics of form and movement (DeSForM 2006)

Design and Semantics of Form and Movement (DeSForM) grew from applied research exploring emerging design methods and practices to support new generation product and interface design. The products and interfaces are concerned with: the context of ubiquitous computing and ambient technologies and the need for greater empathy in the pre-programmed behaviour of the ‘machines’ that populate our lives. Such explorative research in the CfDR has been led by Young, supported by Kyffin, Visiting Professor from Philips Design and sponsored by Philips Design over a period of four years (research funding £87k). DeSForM1 was the first of a series of three conferences that enable the presentation and debate of international work within this field: • 1st European conference on Design and Semantics of Form and Movement (DeSForM1), Baltic, Gateshead, 2005, Feijs L., Kyffin S. & Young R.A. eds. • 2nd European conference on Design and Semantics of Form and Movement (DeSForM2), Evoluon, Eindhoven, 2006, Feijs L., Kyffin S. & Young R.A. eds. • 3rd European conference on Design and Semantics of Form and Movement (DeSForM3), New Design School Building, Newcastle, 2007, Feijs L., Kyffin S. & Young R.A. eds. Philips sponsorship of practice-based enquiry led to research by three teams of research students over three years and on-going sponsorship of research through the Northumbria University Design and Innovation Laboratory (nuDIL). Young has been invited on the steering panel of the UK Thinking Digital Conference concerning the latest developments in digital and media technologies. Informed by this research is the work of PhD student Yukie Nakano who examines new technologies in relation to eco-design textiles

Development of PVDF tactile dynamic sensing in a behaviour-based assembly robot

The research presented in this thesis focuses on the development of tactile event sig¬ nature sensors and their application, especially in reactive behaviour-based robotic assembly systems.In pursuit of practical and economic sensors for detecting part contact, the application ofPVDF (polyvinylidene fluoride) film, a mechanical vibration sensitive piezo material, is investigated. A Clunk Sensor is developed which remotely detects impact vibrations, and a Push Sensor is developed which senses small changes in the deformation of a compliant finger surface. The Push Sensor is further developed to provide some force direction and force pattern sensing capability.By being able to detect changes of state in an assembly, such as a change of contact force, an assembly robot can be well informed of current conditions. The complex structure of assembly tasks provides a rich context within which to interpret changes of state, so simple binary sensors can conveniently supply a lot more information than in the domain of mobile robots. Guarded motions, for example, which require sensing a change of state, have long been recognised as very useful in part mating tasks. Guarded motions are particularly well suited to be components of assembly behavioural modules.In behaviour-based robotic assembly systems, the high level planner is endowed with as little complexity as possible while the low level planning execution agent deals with actual sensing and action. Highly reactive execution agents can provide advantages by encapsulating low level sensing and action, hiding the details of sensori-motor complexity from the higher levels.Because behaviour-based assembly systems emphasise the utility of this kind of quali¬ tative state-change sensor (as opposed to sensors which measure physical quantities), the robustness and utility of the Push Sensor was tested in an experimental behaviourbased system. An experimental task of pushing a ring along a convoluted stiff wire is chosen, in which the tactile sensors developed here are aided by vision. Three differ¬ ent methods of combining these different sensors within the general behaviour-based paradigm are implemented and compared. This exercise confirms the robustness and utility of the PVDF-based tactile sensors. We argue that the comparison suggests that for behaviour-based assembly systems using multiple concurrent sensor systems, bottom-level motor control in terms of force or velocity would be more appropriate than positional control. Behaviour-based systems have traditionally tried to avoid symbolic knowledge. Considering this in the light of the above work, it was found useful to develop a taxonomy of type of knowledge and refine the prohibition

NASA Tech Briefs, March 1988

Topics include: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; and Life Sciences

NASA Tech Briefs, February 1988

Topics covered include: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Systems; and Life Sciences

Research and Regions. a KWIC Indexed Bibliography

Computerized techniques applied to economics to produce bibliography of related materia