Miniaturization Trends in Substrate Integrated Waveguide (SIW) Filters: A Review

This review provides an overview of the technological advancements and miniaturization trends in Substrate Integrated Waveguide (SIW) filters. SIW is an emerging planar waveguide structure for the transmission of electromagnetic (EM) waves. SIW structure consists of two parallel copper plates which are connected by a series of vias or continuous perfect electric conductor (PEC) channels. SIW is a suitable choice for designing and developing the microwave and millimetre-wave (mm-Wave) radio frequency (RF) components: because it has compact dimensions, low insertion loss, high-quality factor (QF), and can easily integrate with planar RF components. SIW technology enjoys the advantages of the classical bulky waveguides in a planar structure; thus is a promising choice for microwave and mm-Wave RF components

Versatile silicon-waveguide supercontinuum for coherent mid-infrared spectroscopy

Infrared spectroscopy is a powerful tool for basic and applied science. The molecular spectral fingerprints in the 3 um to 20 um region provide a means to uniquely identify molecular structure for fundamental spectroscopy, atmospheric chemistry, trace and hazardous gas detection, and biological microscopy. Driven by such applications, the development of low-noise, coherent laser sources with broad, tunable coverage is a topic of great interest. Laser frequency combs possess a unique combination of precisely defined spectral lines and broad bandwidth that can enable the above-mentioned applications. Here, we leverage robust fabrication and geometrical dispersion engineering of silicon nanophotonic waveguides for coherent frequency comb generation spanning 70 THz in the mid-infrared (2.5 um to 6.2 um). Precise waveguide fabrication provides significant spectral broadening and engineered spectra targeted at specific mid-infrared bands. We use this coherent light source for dual-comb spectroscopy at 5 um.Comment: 26 pages, 5 figure

Recent Trends on Dual- and Triple-Band Microwave Filters for Wireless Communications

In the past few years, several designs of dual- and triple-band microwave filters satisfying various objectives have been proposed for wireless communication. Several designs are new concepts, whereas others are inspired from previous works. The development trends of these designs can be reviewed from this compilation of studies. This paper begins with an explanation of dual- and triple-band microwave filters, followed by a discussion on several designs in terms of size, measurement, performance, and technology use. Among various designs, microstrip band-pass filters are extensively used because of their simple design procedures and because they can be integrated into circuits easily. Furthermore, most researchers use low frequencies in their designs because of the demands of current wireless applications. Finally, designs are proposed to produce compact microwave filters with good performance

An Overview of Recent Development of the Gap-Waveguide Technology for mmWave and Sub-THz Applications

The millimeter-wave (mmWave) and sub-terahertz (sub-THz) bands have received much attention in recent years for wireless communication and high-resolution imaging radar applications. The objective of this paper is to provide an overview of recent developments in the design and technical implementation of GW-based antenna systems and components. This paper begins by comparing the GW-transmission line to other widely used transmission lines for the mmWave and sub-THz bands. Furthermore, the basic operating principle and possible implementation technique of the GW-technology are briefly discussed. In addition, various antennas and passive components have been developed based on the GW-technology. Despite its advantages in controlling electromagnetic wave propagation, it is also widely used for the packaging of electronic components such as transceivers and power amplifiers. This article also provided an overview of the current manufacturing technologies that are commonly used for the fabrication of GW-components. Finally, the practical applications and industry interest in GW technology developments for mmWave and sub-THz applications have been scrutinized.Funding Agencies|European Union - Marie Sklodowska-Curie [766231WAVECOMBEH2020-MSCA-ITN-2017]</p

Far-field scattering microscopy applied to analysis of slow light, power enhancement, and delay times in uniform Bragg waveguide gratings

A novel method is presented for determining the group index, intensity enhancement and delay times for waveguide gratings, based on (Rayleigh) scattering observations. This far-field scattering microscopy (FScM) method is compared with the phase shift method and a method that uses the transmission spectrum to quantify the slow wave properties. We find a minimum group velocity of 0.04c and a maximum intensity enhancement of ~14.5 for a 1000-period grating and a maximum group delay of ~80 ps for a 2000-period grating. Furthermore, we show that the FScM method can be used for both displaying the intensity distribution of the Bloch resonances and for investigating out of plane losses. Finally, an application is discussed for the slow-wave grating as index sensor able to detect a minimum cladding index change of $10^{-8}$, assuming a transmission detection limit of $10^{-4}$

Design of compact stop-band extended microstrip low-pass filters by employing mutual-coupled square-shaped defected ground structures

A new technique to reduce the size, improve the rejection in the stop-band of a low-pass filter using modified defected ground structure (DGS) is proposed. An equivalent circuit model is used to study the DGS characteristics. The parameters are extracted by using a simple circuit analysis method. Several comparisons between the EM-simulations and the circuit simulations of the new structure are demonstrated to show the validity of the proposed equivalent circuit model. We demonstrated that the filter can provide a sharp transition domain and a wide rejection in stop-band. To further verify the new technique, a filter employing the new deformed DGS is fabricated and measured. The agreement between the simulation and the measured results confirms the effectiveness of the proposed concept. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 1107–1111, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23273Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/58033/1/23273_ftp.pd

Epsilon-Near-Zero Al-Doped ZnO for Ultrafast Switching at Telecom Wavelengths: Outpacing the Traditional Amplitude-Bandwidth Trade-Off

Transparent conducting oxides have recently gained great attention as CMOS-compatible materials for applications in nanophotonics due to their low optical loss, metal-like behavior, versatile/tailorable optical properties, and established fabrication procedures. In particular, aluminum doped zinc oxide (AZO) is very attractive because its dielectric permittivity can be engineered over a broad range in the near infrared and infrared. However, despite all these beneficial features, the slow (> 100 ps) electron-hole recombination time typical of these compounds still represents a fundamental limitation impeding ultrafast optical modulation. Here we report the first epsilon-near-zero AZO thin films which simultaneously exhibit ultra-fast carrier dynamics (excitation and recombination time below 1 ps) and an outstanding reflectance modulation up to 40% for very low pump fluence levels (< 4 mJ/cm2) at the telecom wavelength of 1.3 {\mu}m. The unique properties of the demonstrated AZO thin films are the result of a low temperature fabrication procedure promoting oxygen vacancies and an ultra-high carrier concentration. As a proof-of-concept, an all-optical AZO-based plasmonic modulator achieving 3 dB modulation in 7.5 {\mu}m and operating at THz frequencies is numerically demonstrated. Our results overcome the traditional "modulation depth vs. speed" trade-off by at least an order of magnitude, placing AZO among the most promising compounds for tunable/switchable nanophotonics.Comment: 14 pages, 9 figures, 1 tabl

E-plane parallel coupled resonators for waveguide bandpass filter applications

High skirt selectivity and extended out-of-band rejection is a major challenge for the successful progress of in-line microwave filters. This thesis presents novel filter realizations with improved performance, compatible with the standard single thin all-metal insert in a split-block housing and therefore maintaining the low-cost fabrication characteristics. In addition, significant filter performance improvement is achieved. The synthesis procedure implemented for the filter concept consists of a few steps. Some preliminary steps are a rigorous characterization of a double-ridge coaxial waveguide, and the modelling of an equivalent circuit model for the parallel coupled ridge waveguide devised in the filter concept. From these elements, a full wave electromagnetic analysis shows that parallel-coupled asymmetric ridge waveguides produce strongly dispersive coupling which introduces a transmission zero. Later on this property is extended to parallel-coupled asymmetric ridge waveguide resonators, where it is demonstrated that it is possible to independently control the coupling coefficient and the frequency of the transmission zero. This allows the realization of pseudo-elliptic narrowband in-line bandpass filters in E-plane technology. A general synthesis procedure for high order filters is outlined and numerical and experimental results are presented for validation. The elements employed for the synthesis procedure of the bandpass prototypes are also applied to investigate structures suitable for different applications. In particular, stopband and dual stopband filters are presented with numerical and experimental results. Finally, the study of a microwave chemical/biochemical sensing device for the characterization and detection of cells in chemical substances and cells in solution in micro-litre volumes is also reported.Engineering and Physical Sciences Research Council(EPSRC