3,687 research outputs found
A Sliding Mode Force and Position Controller Synthesis for Series Elastic Actuators
This paper deals with the robust force and position control problems of
Series Elastic Actuators. It is shown that a Series Elastic Actuator's force
control problem can be described by a second-order dynamic model which suffers
from only matched disturbances. However, the position control dynamics of a
Series Elastic Actuator is of fourth-order and includes matched and mismatched
disturbances. In other words, a Series Elastic Actuator's position control is
more complicated than its force control, particularly when disturbances are
considered. A novel robust motion controller is proposed for Series Elastic
Actuators by using Disturbance Observer and Sliding Mode Control. When the
proposed robust motion controller is implemented, a Series Elastic Actuator can
precisely track desired trajectories and safely contact with an unknown and
dynamic environment. The proposed motion controller does not require precise
dynamic models of the actuator and environment. Therefore, it can be applied to
many different advanced robotic systems such as compliant humanoids and
exoskeletons. The validity of the motion controller is experimentally verified.Comment: Accepted by Robotica in 201
A Novel Adaptive Sliding Mode Controller for a 2-DOF Elastic Robotic Arm
Collaborative robots (or cobots) are robots that are capable of safely operating in a shared environment or interacting with humans. In recent years, cobots have become increasingly common. Compliant actuators are critical in the design of cobots. In real applications, this type of actuation system may be able to reduce the amount of damage caused by an unanticipated collision. As a result, elastic joints are expected to outperform stiff joints in complex situations. In this work, the control of a 2-DOF robot arm with elastic actuators is addressed by proposing a two-loop adaptive controller. For the outer control loop, an adaptive sliding mode controller (ASMC) is adopted to deal with uncertainties and disturbance on the load side of the robot arm. For the inner loops, model reference adaptive controllers (MRAC) are utilised to handle the uncertainties on the motor side of the robot arm. To show the effectiveness of the proposed controller, extensive simulation experiments and a comparison with the conventional sliding mode controller (SMC) are carried out. As a result, the ASMC has a 50.35% lower average RMS error than the SMC controller, and a shorter settling time (5% criterion) (0.44 s compared to 2.11 s).publishedVersio
Second-order SM approach to SISO time-delay system output tracking
A fully linearizable single-input-single-output relative-degree n system with an output time delay is considered in this paper. Using the approach of Pade approximation, system center approach, and second-order sliding-mode (SM) control, we have obtained good output tracking results. The Smith predictor is used to compensate the difference between the actual delayed output and its approximation. A second-order supertwisting SM observer observes the disturbance in the plant. A nonlinear example is studied to show the effect of this methodology
Nonlinear disturbance attenuation control of hydraulic robotics
This paper presents a novel nonlinear disturbance rejection control for
hydraulic robots. This method requires two third-order filters as well as
inverse dynamics in order to estimate the disturbances. All the parameters for
the third-order filters are pre-defined. The proposed method is nonlinear,
which does not require the linearization of the rigid body dynamics. The
estimated disturbances are used by the nonlinear controller in order to achieve
disturbance attenuation. The performance of the proposed approach is compared
with existing approaches. Finally, the tracking performance and robustness of
the proposed approach is validated extensively on real hardware by performing
different tasks under either internal or both internal and external
disturbances. The experimental results demonstrate the robustness and superior
tracking performance of the proposed approach
Hybrid fuzzy sliding mode control for motorised space tether spin-up when coupled with axial and torsional oscillation
A specialised hybrid controller is applied to the control of a motorised space tether spin-up space coupled with an axial and a torsional oscillation phenomenon. A seven-degree-of-freedom (7-DOF) dynamic model of a motorised momentum exchange tether is used as the basis for interplanetary payload exchange in the context of control. The tether comprises a symmetrical double payload configuration, with an outrigger counter inertia and massive central facility. It is shown that including axial and torsional elasticity permits an enhanced level of performance prediction accuracy and a useful departure from the usual rigid body representations, particularly for accurate payload positioning at strategic points. A simulation with given initial condition data has been devised in a connecting programme between control code written in MATLAB and dynamics simulation code constructed within MATHEMATICA. It is shown that there is an enhanced level of spin-up control for the 7-DOF motorised momentum exchange tether system using the specialised hybrid controller.
hybrid controller
Variable stiffness robotic hand for stable grasp and flexible handling
Robotic grasping is a challenging area in the field of robotics. When interacting with an object, the dynamic properties of the object will play an important role where a gripper (as a system), which has been shown to be stable as per appropriate stability criteria, can become unstable when coupled to an object. However, including a sufficiently compliant element within the actuation system of the robotic hand can increase the stability of the grasp in the presence of uncertainties. This paper deals with an innovative robotic variable stiffness hand design, VSH1, for industrial applications. The main objective of this work is to realise an affordable, as well as durable, adaptable, and compliant gripper for industrial environments with a larger interval of stiffness variability than similar existing systems. The driving system for the proposed hand consists of two servo motors and one linear spring arranged in a relatively simple fashion. Having just a single spring in the actuation system helps us to achieve a very small hysteresis band and represents a means by which to rapidly control the stiffness. We prove, both mathematically and experimentally, that the proposed model is characterised by a broad range of stiffness. To control the grasp, a first-order sliding mode controller (SMC) is designed and presented. The experimental results provided will show how, despite the relatively simple implementation of our first prototype, the hand performs extremely well in terms of both stiffness variability and force controllability
Performance of modified jatropha oil in combination with hexagonal boron nitride particles as a bio-based lubricant for green machining
This study evaluates the machining performance of newly developed modified jatropha oils (MJO1, MJO3 and MJO5), both with and without hexagonal boron nitride (hBN) particles (ranging between 0.05 and 0.5 wt%) during turning of AISI 1045 using minimum quantity lubrication (MQL). The experimental results indicated that, viscosity improved with the increase in MJOs molar ratio and hBN concentration. Excellent tribological behaviours is found to correlated with a better machining performance were achieved by MJO5a with 0.05 wt%. The MJO5a sample showed the lowest values of cutting force, cutting temperature and surface roughness, with a prolonged tool life and less tool wear, qualifying itself to be a potential alternative to the synthetic ester, with regard to the environmental concern
- …