Concepts for on-board satellite image registration. Volume 3: Impact of VLSI/VHSIC on satellite on-board signal processing

Anticipated major advances in integrated circuit technology in the near future are described as well as their impact on satellite onboard signal processing systems. Dramatic improvements in chip density, speed, power consumption, and system reliability are expected from very large scale integration. Improvements are expected from very large scale integration enable more intelligence to be placed on remote sensing platforms in space, meeting the goals of NASA's information adaptive system concept, a major component of the NASA End-to-End Data System program. A forecast of VLSI technological advances is presented, including a description of the Defense Department's very high speed integrated circuit program, a seven-year research and development effort

Design study of a low cost civil aviation GPS receiver system

A low cost Navstar receiver system for civil aviation applications was defined. User objectives and constraints were established. Alternative navigation processing design trades were evaluated. Receiver hardware was synthesized by comparing technology projections with various candidate system designs. A control display unit design was recommended as the result of field test experience with Phase I GPS sets and a review of special human factors for general aviation users. Areas requiring technology development to ensure a low cost Navstar Set in the 1985 timeframe were identified

A Multiproject Chip Approach to the Teaching of Analog MOS LSI and VLSI

Multiproject chip implementation has been used in teaching analog MOS circuit design. After having worked with computer simulation and layout aids in homework problems, students designed novel circuits including several high performance op amps, an A/D converter, a switched capacitor filter, a 1 K dynamic RAM, and a variety of less conventional MOS circuits such as a VII converter, an AC/DC converter, an AM radio receiver, a digitally-controlled analog signal processor, and on-chip circuitry for measuring transistor capacitances. These circuits were laid out as part of an NMOS multiproject chip. Several of the designs exhibit a considerable degree of innovation; fabrication pending, computer simulation shows that some may be pushing the state of the art. Several designs are of interest to digital designers; in fact, the course has provided knowledge and technique needed for detailed digital circuit design at the gate level

Multi-port Memory Design for Advanced Computer Architectures

In this thesis, we describe and evaluate novel memory designs for multi-port on-chip and off-chip use in advanced computer architectures. We focus on combining multi-porting and evaluating the performance over a range of design parameters. Multi-porting is essential for caches and shared-data systems, especially multi-core System-on-chips (SOC). It can significantly increase the memory access throughput. We evaluate FinFET voltage-mode multi-port SRAM cells using different metrics including leakage current, static noise margin and read/write performance. Simulation results show that single-ended multi-port FinFET SRAMs with isolated read ports offer improved read stability and flexibility over classical double-ended structures at the expense of write performance. By increasing the size of the access transistors, we show that the single-ended multi-port structures can achieve equivalent write performance to the classical double-ended multi-port structure for 9% area overhead. Moreover, compared with CMOS SRAM, FinFET SRAM has better stability and standby power. We also describe new methods for the design of FinFET current-mode multi-port SRAM cells. Current-mode SRAMs avoid the full-swing of the bitline, reducing dynamic power and access time. However, that comes at the cost of voltage drop, which compromises stability. The design proposed in this thesis utilizes the feature of Independent Gate (IG) mode FinFET, which can leverage threshold voltage by controlling the back gate voltage, to merge two transistors into one through high-Vt and low-Vt transistors. This design not only reduces the voltage drop, but it also reduces the area in multi-port current-mode SRAM design. For off-chip memory, we propose a novel two-port 1-read, 1-write (1R1W) phasechange memory (PCM) cell, which significantly reduces the probability of blocking at the bank levels. Different from the traditional PCM cell, the access transistors are at the top and connected to the bitline. We use Verilog-A to model the behavior of Ge2Sb2Te5 (GST: the storage component). We evaluate the performance of the two-port cell by transistor sizing and voltage pumping. Simulation results show that pMOS transistor is more practical than nMOS transistor as the access device when both area and power are considered. The estimated area overhead is 1.7�, compared to single-port PCM cell. In brief, the contribution we make in this thesis is that we propose and evaluate three different kinds of multi-port memories that are favorable for advanced computer architectures

Implicit feed-forward compensated op-amp with split pairs

Disclosed are systems implementing an implicit Feed-Forward Compensated (FFC) op-amp, where the main FFC port is realized by the P-side of the CMOS input structure of the 2nd and 3rd stages of the op-amp, while the main signal path is through the N-side. According to some embodiments, to balance the relative strengths of the main path and feed-forward paths, the 2nd-stage NMOS input pair is split into two pairs, one is used to route the main path while the other is used for auxiliary FFC. The disclosed implicit FCC op-amp is unconditionally stable with adequate phase lead. According to some embodiments, the disclosed op-amp, which may be a wide-band op-amp, can be used in highly linear applications operative at intermediate frequency (IF), such as signal buffers for high-performance data converters or radio-frequency (RF) modulators and demodulators, continuous-time (CT) filters or sigma-delta data converters.Board of Regents, University of Texas Syste

Variation Resilient Adaptive Controller for Subthreshold Circuits

Subthreshold logic is showing good promise as a viable ultra-low-power circuit design technique for power-limited applications. For this design technique to gain widespread adoption, one of the most pressing concerns is how to improve the robustness of subthreshold logic to process and temperature variations. We propose a variation resilient adaptive controller for subthreshold circuits with the following novel features: new sensor based on time-to-digital converter for capturing the variations accurately as digital signatures, and an all-digital DC-DC converter incorporating the sensor capable of generating an operating operating Vdd from 0V to 1.2V with a resolution of 18.75mV, suitable for subthreshold circuit operation. The benefits of the proposed controller is reflected with energy improvement of up to 55% compared to when no controller is employed. The detailed implementation and validation of the proposed controller is discussed

Second year technical report on-board processing for future satellite communications systems

Advanced baseband and microwave switching techniques for large domestic communications satellites operating in the 30/20 GHz frequency bands are discussed. The nominal baseband processor throughput is one million packets per second (1.6 Gb/s) from one thousand T1 carrier rate customer premises terminals. A frequency reuse factor of sixteen is assumed by using 16 spot antenna beams with the same 100 MHz bandwidth per beam and a modulation with a one b/s per Hz bandwidth efficiency. Eight of the beams are fixed on major metropolitan areas and eight are scanning beams which periodically cover the remainder of the U.S. under dynamic control. User signals are regenerated (demodulated/remodulated) and message packages are reformatted on board. Frequency division multiple access and time division multiplex are employed on the uplinks and downlinks, respectively, for terminals within the coverage area and dwell interval of a scanning beam. Link establishment and packet routing protocols are defined. Also described is a detailed design of a separate 100 x 100 microwave switch capable of handling nonregenerated signals occupying the remaining 2.4 GHz bandwidth with 60 dB of isolation, at an estimated weight and power consumption of approximately 400 kg and 100 W, respectively

Dynamic Voltage Scaling Aware Delay Fault Testing

The application of Dynamic Voltage Scaling (DVS) to reduce energy consumption may have a detrimental impact on the quality of manufacturing tests employed to detect permanent faults. This paper analyses the influence of different voltage/frequency settings on fault detection within a DVS application. In particular, the effect of supply voltage on different types of delay faults is considered. This paper presents a study of these problems with simulation results. We have demonstrated that the test application time increases as we reduce the test voltage. We have also shown that for newer technologies we do not have to go to very low voltage levels for delay fault testing. We conclude that it is necessary to test at more than one operating voltage and that the lowest operating voltage does not necessarily give the best fault cover

Content addressable memory project

A parameterized version of the tree processor was designed and tested (by simulation). The leaf processor design is 90 percent complete. We expect to complete and test a combination of tree and leaf cell designs in the next period. Work is proceeding on algorithms for the computer aided manufacturing (CAM), and once the design is complete we will begin simulating algorithms for large problems. The following topics are covered: (1) the practical implementation of content addressable memory; (2) design of a LEAF cell for the Rutgers CAM architecture; (3) a circuit design tool user's manual; and (4) design and analysis of efficient hierarchical interconnection networks