Real-time Aerial Vehicle Detection and Tracking using a Multi-modal Optical Sensor

Vehicle tracking from an aerial platform poses a number of unique challenges including the small number of pixels representing a vehicle, large camera motion, and parallax error. For these reasons, it is accepted to be a more challenging task than traditional object tracking and it is generally tackled through a number of different sensor modalities. Recently, the Wide Area Motion Imagery sensor platform has received reasonable attention as it can provide higher resolution single band imagery in addition to its large area coverage. However, still, richer sensory information is required to persistently track vehicles or more research on the application of WAMI for tracking is required. With the advancements in sensor technology, hyperspectral data acquisition at video frame rates become possible as it can be cruical in identifying objects even in low resolution scenes. For this reason, in this thesis, a multi-modal optical sensor concept is considered to improve tracking in adverse scenes. The Rochester Institute of Technology Multi-object Spectrometer is capable of collecting limited hyperspectral data at desired locations in addition to full-frame single band imagery. By acquiring hyperspectral data quickly, tracking can be achieved at reasonableframe rates which turns out to be crucial in tracking. On the other hand, the relatively high cost of hyperspectral data acquisition and transmission need to be taken into account to design a realistic tracking. By inserting extended data of the pixels of interest we can address or avoid the unique challenges posed by aerial tracking. In this direction, we integrate limited hyperspectral data to improve measurement-to-track association. Also, a hyperspectral data based target detection method is presented to avoid the parallax effect and reduce the clutter density. Finally, the proposed system is evaluated on realistic, synthetic scenarios generated by the Digital Image and Remote Sensing software

The University Defence Research Collaboration In Signal Processing

This chapter describes the development of algorithms for automatic detection of anomalies from multi-dimensional, undersampled and incomplete datasets. The challenge in this work is to identify and classify behaviours as normal or abnormal, safe or threatening, from an irregular and often heterogeneous sensor network. Many defence and civilian applications can be modelled as complex networks of interconnected nodes with unknown or uncertain spatio-temporal relations. The behavior of such heterogeneous networks can exhibit dynamic properties, reflecting evolution in both network structure (new nodes appearing and existing nodes disappearing), as well as inter-node relations. The UDRC work has addressed not only the detection of anomalies, but also the identification of their nature and their statistical characteristics. Normal patterns and changes in behavior have been incorporated to provide an acceptable balance between true positive rate, false positive rate, performance and computational cost. Data quality measures have been used to ensure the models of normality are not corrupted by unreliable and ambiguous data. The context for the activity of each node in complex networks offers an even more efficient anomaly detection mechanism. This has allowed the development of efficient approaches which not only detect anomalies but which also go on to classify their behaviour

The University Defence Research Collaboration In Signal Processing: 2013-2018

Signal processing is an enabling technology crucial to all areas of defence and security. It is called for whenever humans and autonomous systems are required to interpret data (i.e. the signal) output from sensors. This leads to the production of the intelligence on which military outcomes depend. Signal processing should be timely, accurate and suited to the decisions to be made. When performed well it is critical, battle-winning and probably the most important weapon which you’ve never heard of. With the plethora of sensors and data sources that are emerging in the future network-enabled battlespace, sensing is becoming ubiquitous. This makes signal processing more complicated but also brings great opportunities. The second phase of the University Defence Research Collaboration in Signal Processing was set up to meet these complex problems head-on while taking advantage of the opportunities. Its unique structure combines two multi-disciplinary academic consortia, in which many researchers can approach different aspects of a problem, with baked-in industrial collaboration enabling early commercial exploitation. This phase of the UDRC will have been running for 5 years by the time it completes in March 2018, with remarkable results. This book aims to present those accomplishments and advances in a style accessible to stakeholders, collaborators and exploiters

Context Exploitation in Data Fusion

Complex and dynamic environments constitute a challenge for existing tracking algorithms. For this reason, modern solutions are trying to utilize any available information which could help to constrain, improve or explain the measurements. So called Context Information (CI) is understood as information that surrounds an element of interest, whose knowledge may help understanding the (estimated) situation and also in reacting to that situation. However, context discovery and exploitation are still largely unexplored research topics. Until now, the context has been extensively exploited as a parameter in system and measurement models which led to the development of numerous approaches for the linear or non-linear constrained estimation and target tracking. More specifically, the spatial or static context is the most common source of the ambient information, i.e. features, utilized for recursive enhancement of the state variables either in the prediction or the measurement update of the filters. In the case of multiple model estimators, context can not only be related to the state but also to a certain mode of the filter. Common practice for multiple model scenarios is to represent states and context as a joint distribution of Gaussian mixtures. These approaches are commonly referred as the join tracking and classification. Alternatively, the usefulness of context was also demonstrated in aiding the measurement data association. Process of formulating a hypothesis, which assigns a particular measurement to the track, is traditionally governed by the empirical knowledge of the noise characteristics of sensors and operating environment, i.e. probability of detection, false alarm, clutter noise, which can be further enhanced by conditioning on context. We believe that interactions between the environment and the object could be classified into actions, activities and intents, and formed into structured graphs with contextual links translated into arcs. By learning the environment model we will be able to make prediction on the target\u2019s future actions based on its past observation. Probability of target future action could be utilized in the fusion process to adjust tracker confidence on measurements. By incorporating contextual knowledge of the environment, in the form of a likelihood function, in the filter measurement update step, we have been able to reduce uncertainties of the tracking solution and improve the consistency of the track. The promising results demonstrate that the fusion of CI brings a significant performance improvement in comparison to the regular tracking approaches

Review on Active and Passive Remote Sensing Techniques for Road Extraction

Digital maps of road networks are a vital part of digital cities and intelligent transportation. In this paper, we provide a comprehensive review on road extraction based on various remote sensing data sources, including high-resolution images, hyperspectral images, synthetic aperture radar images, and light detection and ranging. This review is divided into three parts. Part 1 provides an overview of the existing data acquisition techniques for road extraction, including data acquisition methods, typical sensors, application status, and prospects. Part 2 underlines the main road extraction methods based on four data sources. In this section, road extraction methods based on different data sources are described and analysed in detail. Part 3 presents the combined application of multisource data for road extraction. Evidently, different data acquisition techniques have unique advantages, and the combination of multiple sources can improve the accuracy of road extraction. The main aim of this review is to provide a comprehensive reference for research on existing road extraction technologies.Peer reviewe

A multiobjective, multidisciplinary design optimization methodology for the conceptual design of distributed satellite systems

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 2002.Includes bibliographical references (p. 427-438).This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.A multiobjective, multidisciplinary design optimization methodology for mathematically modeling the distributed satellite system (DSS) conceptual design problem as an optimization problem has been developed to advance the state-of-the-art in complex distributed satellite network design. An increasing number of space missions are utilizing DSS architectures in which multiple satellites work in a coordinated fashion to improve system performance, cost, and survivability. The trade space for distributed satellite systems can be enormous - too large to enumerate, analyze, and compare all possible architectures. The seven-step methodology enables an efficient search of the trade space for the best families of architectures, and explores architectures that might not otherwise be considered during the conceptual design phase, the phase of a DSS program in which the majority of lifecycle cost gets locked in. Four classes of multidisciplinary design optimization (MDO) techniques are investigated - Taguchi, heuristic, gradient, and univariate methods. The heuristic simulated annealing (SA) algorithm found the best DSS architectures with the greatest consistency due to its ability to escape local optima within a nonconvex trade space. Accordingly, this SA algorithm forms the core single objective MDO algorithm in the methodology. The DSS conceptual design problem scope is then broadened by expanding from single objective to multiobjective optimization problems, and two variant multiobjective SA algorithms are developed.(cont.) The utility in knowing the global Pareto boundary of a DSS trade space is presented, and several methods are explored for approximating the true global Pareto boundary with only a limited knowledge of the full DSS trade space. Finally, methods for improving the performance of the SA algorithm are tested, and it was found that the 2-DOF variant of the SA algorithm is most effective at both single objective and multiobjective searches of a DSS trade space. The versatility of the methodology is demonstrated through its application to the conceptual design of three separate distributed satellite systems - the civil NASA Origins Terrestrial Planet Finder mission, the military TechSat 21 GMTI space-based radar mission, and the commercial broadband satellite communications mission. In each case, the methodology identifies more cost-effective system architectures than those previously considered for the single objective optimization problem, and a Pareto optimal set of architectures for the multiobjective optimization problem. In this manner, the methodology serves as a powerful, versatile systems engineering tool for the conceptual design of distributed satellite systems.by Cyrus D. Jilla.Ph.D

Advances and Applications of Dezert-Smarandache Theory (DSmT) for Information Fusion (Collected Works), Vol. 4

The fourth volume on Advances and Applications of Dezert-Smarandache Theory (DSmT) for information fusion collects theoretical and applied contributions of researchers working in different fields of applications and in mathematics. The contributions (see List of Articles published in this book, at the end of the volume) have been published or presented after disseminating the third volume (2009, http://fs.unm.edu/DSmT-book3.pdf) in international conferences, seminars, workshops and journals. First Part of this book presents the theoretical advancement of DSmT, dealing with Belief functions, conditioning and deconditioning, Analytic Hierarchy Process, Decision Making, Multi-Criteria, evidence theory, combination rule, evidence distance, conflicting belief, sources of evidences with different importance and reliabilities, importance of sources, pignistic probability transformation, Qualitative reasoning under uncertainty, Imprecise belief structures, 2-Tuple linguistic label, Electre Tri Method, hierarchical proportional redistribution, basic belief assignment, subjective probability measure, Smarandache codification, neutrosophic logic, Evidence theory, outranking methods, Dempster-Shafer Theory, Bayes fusion rule, frequentist probability, mean square error, controlling factor, optimal assignment solution, data association, Transferable Belief Model, and others. More applications of DSmT have emerged in the past years since the apparition of the third book of DSmT 2009. Subsequently, the second part of this volume is about applications of DSmT in correlation with Electronic Support Measures, belief function, sensor networks, Ground Moving Target and Multiple target tracking, Vehicle-Born Improvised Explosive Device, Belief Interacting Multiple Model filter, seismic and acoustic sensor, Support Vector Machines, Alarm classification, ability of human visual system, Uncertainty Representation and Reasoning Evaluation Framework, Threat Assessment, Handwritten Signature Verification, Automatic Aircraft Recognition, Dynamic Data-Driven Application System, adjustment of secure communication trust analysis, and so on. Finally, the third part presents a List of References related with DSmT published or presented along the years since its inception in 2004, chronologically ordered

Multiple-Target Tracking in Complex Scenarios

In this dissertation, we develop computationally efficient algorithms for multiple-target tracking: MTT) in complex scenarios. For each of these scenarios, we develop measurement and state-space models, and then exploit the structure in these models to propose efficient tracking algorithms. In addition, we address design issues such as sensor selection and resource allocation. First, we consider MTT when the targets themselves are moving in a time-varying multipath environment. We develop a sparse-measurement model that allows us to exploit the inherent joint delay-Doppler diversity offered by the environment. We then reformulate the problem of MTT as a block-support recovery problem using the sparse measurement model. We exploit the structure of the dictionary matrix to develop a computationally efficient block support recovery algorithm: and thereby a multiple-target tracking algorithm) under the assumption that the channel state describing the time-varying multipath environment is known. Further, we also derive an upper bound on the overall error probability of wrongly identifying the support of the sparse signal. We then relax the assumption that the channel state is known. We develop a new particle filter called the Multiple Rao-Blackwellized Particle Filter: MRBPF) to jointly estimate both the target and the channel states. We also compute the posterior Cramér-Rao bound: PCRB) on the estimates of the target and the channel states and use the PCRB to find a suitable subset of antennas to be used for transmission in each tracking interval, as well as the power transmitted by these antennas. Second, we consider the problem of tracking an unknown number and types of targets using a multi-modal sensor network. In a multi-modal sensor network, different quantities associated with the same state are measured using sensors of different kinds. Hence, an efficient method that can suitably combine the diverse information measured by each sensor is required. We first develop a Hierarchical Particle Filter: HPF) to estimate the unknown state from the multi-modal measurements for a special class of problems which can be modeled hierarchically. We then model our problem of tracking using a hierarchical model and then use the proposed HPF for joint initiation, termination and tracking of multiple targets. The multi-modal data consists of the measurements collected from a radar, an infrared camera and a human scout. We also propose a unified framework for multi-modal sensor management that comprises sensor selection: SS), resource allocation: RA) and data fusion: DF). Our approach is inspired by the trading behavior of economic agents in commercial markets. We model the sensors and the sensor manager as economic agents, and the interaction among them as a double sided market with both consumers and producers. We propose an iterative double auction mechanism for computing the equilibrium of such a market. We relate the equilibrium point to the solutions of SS, RA and DF. Third, we address MTT problem in the presence of data association ambiguity that arises due to clutter. Data association corresponds to the problem of assigning a measurement to each target. We treat the data association and state estimation as separate subproblems. We develop a game-theoretic framework to solve the data association, in which we model each tracker as a player and the set of measurements as strategies. We develop utility functions for each player, and then use a regret-based learning algorithm to find the correlated equilibrium of this game. The game-theoretic approach allows us to associate measurements to all the targets simultaneously. We then use particle filtering on the reduced dimensional state of each target, independently