244 research outputs found
Comparative Study of Power Semiconductor Devices in a Multilevel Cascaded H-Bridge Inverter
This thesis compares the performance of a nine-level transformerless cascaded H-bridge (CHB) inverter with integrated battery energy storage system (BESS) using SiC power MOSFETs and Si IGBTs. Two crucial performance drivers for inverter applications are power loss and efficiency. Both of these are investigated in this thesis. Power devices with similar voltage and current ratings are used in the same inverter topology, and the performance of each device is analyzed with respect to switching frequency and operating temperature. The loss measurements and characteristics within the inverter are discussed. The Saber® simulation software was used for the comparisons. The power MOSFET and IGBT modeling tools in Saber® were extensively utilized to create the models of the power devices used in the simulations. The inverter system is also analyzed using Saber-Simulink cosimulation method to feed control signals from Simulink into Saber. The results in this investigation show better performances using a SiC MOSFET-based grid-connected BESS inverter with a better return of investment
Investigation of FACTS devices to improve power quality in distribution networks
Flexible AC transmission system (FACTS) technologies are power electronic solutions
that improve power transmission through enhanced power transfer volume and stability,
and resolve quality and reliability issues in distribution networks carrying sensitive
equipment and non-linear loads. The use of FACTS in distribution systems is still in
its infancy. Voltages and power ratings in distribution networks are at a level where
realistic FACTS devices can be deployed. Efficient power converters and therefore loss
minimisation are crucial prerequisites for deployment of FACTS devices.
This thesis investigates high power semiconductor device losses in detail. Analytical
closed form equations are developed for conduction loss in power devices as a function
of device ratings and operating conditions. These formulae have been shown to predict
losses very accurately, in line with manufacturer data. The developed formulae enable
circuit designers to quickly estimate circuit losses and determine the sensitivity of those
losses to device voltage and current ratings, and thus select the optimal semiconductor
device for a specific application.
It is shown that in the case of majority carrier devices (such as power MOSFETs), the
conduction power loss (at rated current) increases linearly in relation to the varying rated
current (at constant blocking voltage), but is a square root of the variable blocking voltage
when rated current is fixed. For minority carrier devices (such as a pin diode or IGBT),
a similar relationship is observed for varying current, however where the blocking voltage
is altered, power losses are derived as a square root with an offset (from the origin).
Finally, this thesis conducts a power loss-oriented evaluation of cascade type multilevel
converters suited to reactive power compensation in 11kV and 33kV systems. The cascade
cell converter is constructed from a series arrangement of cell modules. Two prospective
structures of cascade type converters were compared as a case study: the traditional type
which uses equal-sized cells in its chain, and a second with a ternary relationship between
its dc-link voltages. Modelling (at 81 and 27 levels) was carried out under steady state
conditions, with simplified models based on the switching function and using standard
circuit simulators. A detailed survey of non punch through (NPT) and punch through
(PT) IGBTs was completed for the purpose of designing the two cascaded converters.
Results show that conduction losses are dominant in both types of converters in NPT
and PT IGBTs for 11kV and 33kV systems. The equal-sized converter is only likely to
be useful in one case (27-levels in the 33kV system). The ternary-sequence converter
produces lower losses in all other cases, and this is especially noticeable for the 81-level
converter operating in an 11kV network
Computer aided design of 3D of renewable energy platform for Togo's smart grid power system infrastructure
The global requirement for sustainable energy provision will become increasingly important over the next fifty years as the environmental effects of fossil fuel use become apparent. Therefore, the issues surrounding integration of renewable energy supplies need to be considered carefully. The focus of this work was the development of an innovative computer aided design of a 3 Dimensional renewable energy platform for Togo’s smart grid power system infrastructure. It demonstrates its validation for industrial, commercial and domestic applications. The Wind, Hydro, and PV system forming our 3 Dimensional renewable energy power generation systems introduces a new path for hybrid systems which extends the system capacities to include, a stable and constant clean energy supply, a reduced harmonic distortion, and an improved power system efficiency. Issues requiring consideration in high percentage renewable energy systems therefore includes the reliability of the supply when intermittent sources of electricity are being used, and the subsequent necessity for storage and back-up generation The adoption of Genetic algorithms in this case was much suited in minimizing the THD as the adoption of the CHB-MLI was ideal for connecting renewable energy sources with an AC grid. Cascaded inverters have also been proposed for use as the main traction drive in electric vehicles, where several batteries or ultra-capacitors are well suited to serve as separate DC sources. The simulation done in various non-linear load conditions showed the proportionality of an integral control based compensating cascaded passive filter thereby balancing the system even in non-linear load conditions. The measured total harmonic distortion of the source currents was found to be 2.36% thereby in compliance with IEEE 519-1992 and IEC 61000-3 standards for harmonics This work has succeeded in developing a more complete tool for analysing the feasibility of integrated renewable energy systems. This will allow informed decisions to be made about the technical feasibility of supply mix and control strategies, plant type, sizing and storage sizing, for any given area and range of supply options. The developed 3D renewable energy platform was examined and evaluated using CAD software analysis and a laboratory base mini test. The initial results showed improvements compared to other hybrid systems and their existing control systems. There was a notable improvement in the dynamic load demand and response, stability of the system with a reduced harmonic distortion. The derivatives of this research therefore proposes an innovative solution and a path for Togo and its intention of switching to renewable energy especially for its smart grid power system infrastructure. It demonstrates its validation for industrial, commercial and domestic applicationsN/
Emerging Converter Topologies and Control for Grid Connected Photovoltaic Systems
Continuous cost reduction of photovoltaic (PV) systems and the rise of power auctions resulted in the establishment of PV power not only as a green energy source but also as a cost-effective solution to the electricity generation market. Various commercial solutions for grid-connected PV systems are available at any power level, ranging from multi-megawatt utility-scale solar farms to sub-kilowatt residential PV installations. Compared to utility-scale systems, the feasibility of small-scale residential PV installations is still limited by existing technologies that have not yet properly address issues like operation in weak grids, opaque and partial shading, etc. New market drivers such as warranty improvement to match the PV module lifespan, operation voltage range extension for application flexibility, and embedded energy storage for load shifting have again put small-scale PV systems in the spotlight. This Special Issue collects the latest developments in the field of power electronic converter topologies, control, design, and optimization for better energy yield, power conversion efficiency, reliability, and longer lifetime of the small-scale PV systems. This Special Issue will serve as a reference and update for academics, researchers, and practicing engineers to inspire new research and developments that pave the way for next-generation PV systems for residential and small commercial applications
Digital Control of Power Converters and Drives for Hybrid Traction and Wireless Charging
In the last years environmental issues and constant increase of fuel and energy cost have been incentivizing the development of low emission and high efficiency systems, either in traction field or in distributed generation systems from renewable energy sources.
In the automotive industry, alternative solutions to the standard internal combustion engine (ICE) adopted in the conventional vehicles have been developed, i.e. fuel cell electric vehicles (FCEVs), hybrid electric vehicles (HEVs), plug-in hybrid electric vehicles (PHEV) or pure electric vehicles (EVs), also referred as battery powered electric vehicles (BEV).
Both academic and industry researchers all over the world are still facing several technical development areas concerning HEV components, system topologies, power converters and control strategies. Efficiency, lifetime, stability and volume issues have moved the attention on a number of bidirectional conversion solutions, both for the energy transfer to/from the storage element and to/from the electric machine side.
Moreover, along with the fast growing interest in EVs and PHEVs, wireless charging, as a new way of charging batteries, has drawn the attention of researchers, car manufacturers, and customers recently. Compared to conductive power transfer (usually plug-in), wireless power transfer (WPT) is more convenient, weather proof, and electric shock protected. However, there is still more research work needs to be done to optimize efficiency, cost, increase misalignment tolerance, and reduce size of the WPT chargers.
The proposed dissertation describes the work from 2012 to 2014, during the PhD course at the Electric Drives Laboratory of the University of Udine and during my six months visiting scholarship at the University of Michigan in Dearborn. The topics studied are related to power conversion and digital control of converters and drives suitable for hybrid/electric traction, generation from renewable energy sources and wireless charging applications. From the theoretical point of view, multilevel and multiphase DC/AC and DC/DC converters are discussed here, focusing on design issues, optimization (especially from the efficiency point-of-view) and advantages. Some novel modulation algorithms for the neutral-point clamped three-level inverter are presented here as well as a new multiphase proposal for a three-level buck converter. In addition, a new active torque damping technique in order to reduce torque oscillations in internal combustion engines is proposed here.
Mainly, two practical implementations are considered in this dissertation, i.e. an original two-stage bi-directional converter for mild hybrid traction and a wireless charger for electric vehicles fast charge
Power Electronics and Energy Management for Battery Storage Systems
The deployment of distributed renewable generation and e-mobility systems is creating a demand for improved dynamic performance, flexibility, and resilience in electrical grids. Various energy storages, such as stationary and electric vehicle batteries, together with power electronic interfaces, will play a key role in addressing these requests thanks to their enhanced functionality, fast response times, and configuration flexibility. For the large-scale implementation of this technology, the associated enabling developments are becoming of paramount importance. These include energy management algorithms; optimal sizing and coordinated control strategies of different storage technologies, including e-mobility storage; power electronic converters for interfacing renewables and battery systems, which allow for advanced interactions with the grid; and increase in round-trip efficiencies by means of advanced materials, components, and algorithms. This Special Issue contains the developments that have been published b researchers in the areas of power electronics, energy management and battery storage. A range of potential solutions to the existing barriers is presented, aiming to make the most out of these emerging technologies
Application of Modular Multilevel Converter technology to HV power supplies of Neutral Beam injector
Evaluation of the possible application of Modular Multilevel Converter at the AGPS of NBI
High Granularity approaches for effective energy delivery from Photovoltaic Sources
Silicon solar cell technology is a fully mature technology but the need to compete with traditional and other renewable energy sources urges to improve the overall efficiency of a photovoltaic (PV) system by a significant amount. Regardless of the solar panel efficiency, the difference between the nominal performance of a PV system and the energy actually produced is quite high, and it can be quantified in the order of 20%. A loss term, often underestimated, depends on possible failure of the Maximum Power Point Tracking (MPPT) algorithms in the presence of multiple maximum power points in power-voltage characteristic, arising in mismatch conditions. This work proposes High Granularity (HG) approaches in order to improve the PV energy yield: a monitoring strategy, a modeling and a power flux control of the whole PV system, all performed at level of single elementary source (i.e., PV cell or PV panel). An innovative HG sensor infrastructure was developed, and the measurements were exploited to perform an automatic PV system reconfiguration, and to design an information based MPPT. Moreover, the data validated a circuit HG model describing the PV system at single cell level, which also accounts for the electrothermal effect. The model was exploited in an automatic tool which translates an AutoCAD project of a PV plant in an equivalent circuit netlist. Finally, the results were employed to investigate the effectiveness of distributed power conversion – in particular the efficiency of the multilevel cascaded H bridge converter controlled by means of an innovative strategy, which overcomes some issues related to the need of performing a distributed MPPT, was assessed
- …