Performance analysis of a full order sensorless control adaptive observer for doubly-fed induction generator in grid connected operation

This paper focuses on the performance analysis of a sensorless control for a Doubly Fed Induction Generator (DFIG) in grid-connected operation for turbine-based wind generation systems. With reference to a conventional stator flux based Field Oriented Control (FOC), a full-order adaptive observer is implemented and a criterion to calculate the observer gain matrix is provided. The observer provides the estimated stator flux and an estimation of the rotor position is also obtained through the measurements of stator and rotor phase currents. Due to parameter inaccuracy, the rotor position estimation is affected by an error. As a novelty of the discussed approach, the rotor position estimation error is considered as an additional machine parameter, and an error tracking procedure is envisioned in order to track the DFIG rotor position with better accuracy. In particular, an adaptive law based on the Lyapunov theory is implemented for the tracking of the rotor position estimation error, and a current injection strategy is developed in order to ensure the necessary tracking sensitivity around zero rotor voltages. The roughly evaluated rotor position can be corrected by means of the tracked rotor position estimation error, so that the corrected rotor position is sent to the FOC for the necessary rotating coordinate transformation. An extensive experimental analysis is carried out on an 11 kW, 4 poles, 400 V/50 Hz induction machine testifying the quality of the sensorless control

Unified Direct-Flux Vector Control for AC Motor Drives

The paper introduces a Unified Direct-Flux Vector Control scheme suitable for sinusoidal AC motor drives. The AC drives considered here are Induction Motor, Synchronous Reluctance and synchronous Permanent Magnet motor drives, including Interior and Surface-mounted Permanent Magnet types. The proposed controller operates in stator flux coordinates: the stator flux amplitude is directly controlled by the direct voltage component, while the torque is controlled by regulating the quadrature current component. The unified direct-flux control is particularly convenient when flux-weakening is required, since it easily guarantees maximum torque production under current and voltage limitations. The hardware for control is standard and the control firmware is the same for all the motors under test with the only exception of the magnetic model used for flux estimation at low speed. Experimental results on four different drives are provided, showing the validity of the proposed unified control approac

A comprehensive review on brushless doubly-fed reluctance machine

The Brushless Doubly-Fed Reluctance Machine (BDFRM) has been widely investigated in numerous research studies since it is brushless and cageless and there is no winding on the rotor of this emerging machine. This feature leads to several advantages for this machine in comparison with its induction counterpart, i.e., Brushless Doubly-Fed Induction Machine (BDFIM). Less maintenance, less power losses, and also more reliability are the major advantages of BDFRM compared to BDFIM. The design complexity of its reluctance rotor, as well as flux patterns for indirect connection between the two windings mounted on the stator including power winding and control winding, have restricted the development of this machine technology. In the literature, there is not a comprehensive review of the research studies related to BDFRM. In this paper, the previous research studies are reviewed from different points of view, such as operation, design, control, transient model, dynamic model, power factor, Maximum Power Point Tracking (MPPT), and losses. It is revealed that the BDFRM is still evolving since the theoretical results have shown that this machine operates efficiently if it is well-designed

A comprehensive review on brushless doubly-fed reluctance machine

© 2021 by the authors. Licensee MDPI, Basel, Switzerland. The Brushless Doubly-Fed Reluctance Machine (BDFRM) has been widely investigated in numerous research studies since it is brushless and cageless and there is no winding on the rotor of this emerging machine. This feature leads to several advantages for this machine in comparison with its induction counterpart, i.e., Brushless Doubly-Fed Induction Machine (BDFIM). Less maintenance, less power losses, and also more reliability are the major advantages of BDFRM compared to BDFIM. The design complexity of its reluctance rotor, as well as flux patterns for indirect connection between the two windings mounted on the stator including power winding and control winding, have restricted the development of this machine technology. In the literature, there is not a comprehensive review of the research studies related to BDFRM. In this paper, the previous research studies are reviewed from different points of view, such as operation, design, control, transient model, dynamic model, power factor, Maximum Power Point Tracking (MPPT), and losses. It is revealed that the BDFRM is still evolving since the theoretical results have shown that this machine operates efficiently if it is well-designed

Prädiktive Regelung und Finite-Set-Beobachter für Windgeneratoren mit variabler Drehgeschwindigkeit

This dissertation presents several model predictive control (MPC) techniques and finite-position-set observers (FPSOs) for permanent-magnet synchronous generators and doubly-fed induction generators in variable-speed wind turbines. The proposed FPSOs are novel ones and based on the concept of finite-control-set MPC. Then, the problems of the MPC techniques like sensitivity to variations of the model parameters and others are investigated and solved in this work.Die vorliegende Dissertation stellt mehrere unterschiedliche Verfahren der modellprädiktiven Regelung (MPC) und so genannte Finite-Position-Set-Beobachter (FPSO) sowohl für Synchrongeneratoren mit Permanentmagneterregung als auch für doppelt gespeiste Asynchrongeneratoren in Windkraftanlagen mit variabler Drehzahl vor und untersucht diese. Für die Beobachter (FPSO) wird ein neuartiger Ansatz vorgestellt, der auf dem Konzept der Finite-Control-Set-MPC basiert. Außerdem werden typische Eigenschaften der MPC wie beispielsweise die Anfälligkeit gegenüber Parameterschwankungen untersucht und kompensiert

Field oriented control of single and cascaded doubly-fed induction machines

PhD ThesisA single doubly-fed induction machine (SDFM) is a wound rotor induction machine with the stator connected to a supply network and the rotor fed by a bi-directional converter. A cascaded doubly-fed induction machine (CDFM) is a. connection of two wound rotor induction machines with the rotors connected electrically and mechanically thus avoiding brushes. One stator is connected to the supply network and the other is fed by a bidirectional converter. Both schemes, the SDFM and the CDFM, have in common that the VA-rating of the power converter is reduced compared to a singly-fed system. This thesis presents investigations of the field oriented control for the SDFM and the CDFM. - After reviewing and categorising doubly-fed machines a thorough steady state analysis and stator flux oriented control treatment of the SDFM is presented. Although the steady state analysis and the field oriented control of a SDFM is well established it is necessary that this is included as foundation for the CDFM control behaviour and for the sensorless control investigations. Steady state analysis of the CDFM highlights similarities to the SDFM. Two different field oriented control schemes are applied to the CDFM. A previously developed combined flux oriented scheme is modified to be applicable to a CDFM consisting of any machine combination. Furthermore, the scheme is simplified by removing a mathematical control extension in the q-axis, which has a stabilising effect on the control performance. Justified by steady state analysis the stator flux oriented control structure initially developed for the SDFM is applied to the CDFM. Two variations of a position sensorless scheme taking advantage of the proportionalitics between stator and rotor quantities are applied to the SDFM. Differentiating the estimated position angle allows the schemes to be extended for speed control purposes. The performance of the scnsorless field oriented control methods are also investigated on the CDFM. Harmonic analysis of the SDFM / CDFM systeme stablishes harmonic sources and harmonic current propagation through the system. A theoretical harmonic current prediction process incorporating simulation and steady state modeling delivers good results. All theoretical investigations are confirmed by experimental results. The experimental realtime controlled drive system consists of two 2.25 kW wound rotor induction machines, a bidirectional IGBT converter and the control hardware comprises two 8OC167 microcontrollers.Department of Electrical and Electronic Engineerin