ANALYTICAL MODELS AND ELECTRICAL CHARACTERISATION OF ADVANCED MOSFETS IN THE QUASI BALLISTIC REGIME

International audienceThe quasi-ballistic nature of transport in end of the roadmap MOSFETs device is expected to lead to significant on state current enhancement. The current understanding of such mechanism of transport is carefully reviewed in this chapter, underlining the derivation and limits of corresponding analytical models. In a second part, different strategies to compare these models to experiments are discussed, trying to estimate the "degree of ballisticity" achieved in advanced technologies

Characterizationof FD-SOI transistor

In this project, measurements have been made on FD-SOI transistors, fabricated by CEA-LETI, to carry out a characterization of these devices, since they are very new and need to be studied. This work has focused on characterizing the aging mechanism of the devices and the observed RTN. To characterize the aging mechanism and variability of the samples based on the applied cycles, the measurements have been made by applying constant stress voltages (CVS) directly to the device with a wafer prove station and a semiconductor parameter analyzer (SPA). To observe TN, different electrical procedures have been studied, controlling the different parameters during the measurements.En aquest projecte s'han realitzat mesures en transistors FD-SOI, fabricats per CEA-LETI, per tal de dur a terme una caracterització d'aquests dispositius, ja que són molt nous i necessiten de ser estudiats. Aquest treball s'ha centrat en caracteritzar l'envelliment dels dispositius i el RTN observat. Per a caracteritzar l'envelliment i la variabilitat de les mostres en funció dels cicles aplicats, les mesures s'han realitzat aplicant tensions d'estrés constant (CVS) directament al dispositiu amb una taula de puntes i un analitzador de paràmetres de semiconductors (SPA). Per tal d'observar RTN s'han estudiat diferents procediments elèctrics, controlant els diferents paràmetres durant les mesures.En este proyecto se han realizado medidas en transistores FD-SOI, fabricados por CEA-LETI, para llevar a cabo una caracterización de estos dispositivos, puesto que son muy nuevos y necesitan de ser estudiados. Este trabajo se ha centrado en caracterizar los mecanismos de envejecimiento de los dispositivos y el RTN observado. Para caracterizar el envejecimiento y la variabilidad de las muestras en función de los ciclos aplicados, las medidas se han realizado aplicando tensiones de estrés constante (CVS) directamente al dispositivo con una tabla de puntas y un analizador de parámetros de semiconductores (SPA). Para observar RTN se han estudiado diferentes procedimientos eléctricos, controlando los diferentes parámetros durante las medidas

Development of a fully-depleted thin-body FinFET process

The goal of this work is to develop the processes needed for the demonstration of a fully-depleted (FD) thin-body fin field effect transistor (FinFET). Recognized by the 2003 International Technology Roadmap for Semiconductors as an emerging non-classical CMOS technology, FinFETs exhibit high drive current, reduced short-channel effects, an extreme scalability to deep submicron regimes. The approach used in this study will build on previous FinFET research, along with new concepts and technologies. The critical aspects of this research are: (1) thin body creation using spacer etchmasks and oxidation/etchback schemes, (2) use of an oxynitride gate dielectric, (3) silicon crystal orientation effect evaluation, and (4) creation of fully-depleted FinFET devices of submicron gate length on Silicon-on-Insulator (SOI) substrates. The developed process yielded functional FinFETs of both thin body and wide body variety. Electrical tests were employed to describe device behaviour, including their subthreshold characteristics, standard operation, effects of gate misalignment on device performance, and impact of crystal orientation on device drive current. The process is shown to have potential for deep submicron regimes of fin width and gate length, and provides a good foundation for further research of FinFETs and similar technologies at RIT

Caractérisation électrique et modélisation du transport dans matériaux et dispositifs SOI avancés

This thesis is dedicated to the electrical characterization and transport modeling in advanced SOImaterials and devices for ultimate micro-nano-electronics. SOI technology is an efficient solution tothe technical challenges facing further downscaling and integration. Our goal was to developappropriate characterization methods and determine the key parameters. Firstly, the conventionalpseudo-MOSFET characterization was extended to heavily-doped SOI wafers and an adapted modelfor parameters extraction was proposed. We developed a nondestructive electrical method to estimatethe quality of bonding interface in metal-bonded wafers for 3D integration. In ultra-thin fully-depletedSOI MOSFETs, we evidenced the parasitic bipolar effect induced by band-to-band tunneling, andproposed new methods to extract the bipolar gain. We investigated multiple-gate transistors byfocusing on the coupling effect in inversion-mode vertical double-gate SOI FinFETs. An analyticalmodel was proposed and subsequently adapted to the full depletion region of junctionless SOI FinFETs.We also proposed a compact model of carrier profile and adequate parameter extraction techniques forjunctionless nanowires.Cette thèse est consacrée à la caractérisation et la modélisation du transport électronique dans des matériaux et dispositifs SOI avancés pour la microélectronique. Tous les matériaux innovants étudiés(ex: SOI fortement dopé, plaques obtenues par collage etc.) et les dispositifs SOI sont des solutions possibles aux défis technologiques liés à la réduction de taille et à l'intégration. Dans ce contexte,l'extraction des paramètres électriques clés, comme la mobilité, la tension de seuil et les courants de fuite est importante. Tout d'abord, la caractérisation classique pseudo-MOSFET a été étendue aux plaques SOI fortement dopées et un modèle adapté pour l'extraction de paramètres a été proposé. Nous avons également développé une méthode électrique pour estimer la qualité de l'interface de collage pour des plaquettes métalliques. Nous avons montré l'effet bipolaire parasite dans des MOSFET SOI totalement désertés. Il est induit par l’effet tunnel bande-à-bande et peut être entièrement supprimé par une polarisation arrière. Sur cette base, une nouvelle méthode a été développée pour extraire le gain bipolaire. Enfin, nous avons étudié l'effet de couplage dans le FinFET SOI double grille, en mode d’inversion. Un modèle analytique a été proposé et a été ensuite adapté aux FinFETs sans jonction(junctionless). Nous avons mis au point un modèle compact pour le profil des porteurs et des techniques d’extraction de paramètres

DESIGN, COMPACT MODELING AND CHARACTERIZATION OF NANOSCALE DEVICES

Electronic device modeling is a crucial step in the advancement of modern nanotechnology and is gaining more and more interest. Nanoscale complementary metal oxide semiconductor (CMOS) transistors, being the backbone of the electronic industry, are pushed to below 10 nm dimensions using novel manufacturing techniques including extreme lithography. As their dimensions are pushed into such unprecedented limits, their behavior is still captured using models that are decades old. Among many other proposed nanoscale devices, silicon vacuum electron devices are regaining attention due to their presumed advantages in operating at very high power, high speed and under harsh environment, where CMOS cannot compete. Another type of devices that have the potential to complement CMOS transistors are nano-electromechanical systems (NEMS), with potential applications in filters, stable frequency sources, non-volatile memories and reconfigurable and neuromorphic electronics

Characterisation of thermal and coupling effects in advanced silicon MOSFETs

PhD ThesisNew approaches to metal-oxide-semiconductor field effect transistor (MOSFET) engineering emerge in order to keep up with the electronics market demands. Two main candidates for the next few generations of Moore’s law are planar ultra-thin body and buried oxide (UTBB) devices and three-dimensional FinFETs. Due to miniature dimensions and new materials with low thermal conductivity, performance of advanced MOSFETs is affected by self-heating and substrate effects. Self-heating results in an increase of the device temperature which causes mobility reduction, compromised reliability and signal delays. The substrate effect is a parasitic source and drain coupling which leads to frequency-dependent analogue behaviour. Both effects manifest themselves in the output conductance variation with frequency and impact analogue as well as digital performance. In this thesis self-heating and substrate effects in FinFETs and UTBB devices are characterised, discussed and compared. The results are used to identify trade-offs in device performance, geometry and thermal properties. Methods how to optimise the device geometry or biasing conditions in order to minimise the parasitic effects are suggested. To identify the most suitable technique for self-heating characterisation in advanced semiconductor devices, different methods of thermal characterisation (time and frequency domain) were experimentally compared and evaluated alongside an analytical model. RF and two different pulsed I-V techniques were initially applied to partially depleted silicon-on-insulator (PDSOI) devices. The pulsed I-V hot chuck method showed good agreement with the RF technique in the PDSOI devices. However, subsequent analysis demonstrated that for more advanced technologies the time domain methods can underestimate self-heating. This is due to the reduction of the thermal time constants into the nanosecond range and limitations of the pulsed I-V set-up. The reduction is related to the major increase of the surface to volume ratio in advanced MOSFETs. Consequently the work showed that the thermal properties of advanced semiconductor devices must be characterised within the frequency domain. For UTBB devices with 7-8 nm Si body and 10 nm ultra-thin buried oxide (BOX) the analogue performance degradation caused by the substrate effects can be stronger than the analogue performance degradation caused by self-heating. However, the substrate effects can be effectively reduced if the substrate doping beneath the buried ii oxide is adjusted using a ground plane. In the MHz – GHz frequency range the intrinsic voltage gain variation is reduced ~6 times when a device is biased in saturation if a ground plane is implemented compared with a device without a ground plane. UTBB devices with 25 nm BOX were compared with UTBB devices with 10 nm BOX. It was found that the buried oxide thinning from 25 nm to 10 nm is not critical from the thermal point of view as other heat evacuation paths (e.g. source and drain) start to play a role. Thermal and substrate effects in FinFETs were also analysed. It was experimentally shown that FinFET thermal properties depend on the device geometry. The thermal resistance of FinFETs strongly varies with the fin width and number of parallel fins, whereas the fin spacing is less critical. The results suggest that there are trade-offs between thermal properties and integration density, electrostatic control and design complexity, since these aspects depend on device geometry. The high frequency substrate effects were found to be effectively reduced in devices with sub-100 nm wide fins.Engineering and Physical Sciences Research Council (EPSRC) and EU fundin

Reliability Investigations of MOSFETs using RF Small Signal Characterization

Modern technology needs and advancements have introduced various new concepts such as Internet-of-Things, electric automotive, and Artificial intelligence. This implies an increased activity in the electronics domain of analog and high frequency. Silicon devices have emerged as a cost-effective solution for such diverse applications. As these silicon devices are pushed towards higher performance, there is a continuous need to improve fabrication, power efficiency, variability, and reliability. Often, a direct trade-off of higher performance is observed in the reliability of semiconductor devices. The acceleration-based methodologies used for reliability assessment are the adequate time-saving solution for the lifetime's extrapolation but come with uncertainty in accuracy. Thus, the efforts to improve the accuracy of reliability characterization methodologies run in parallel. This study highlights two goals that can be achieved by incorporating high-frequency characterization into the reliability characteristics. The first one is assessing high-frequency performance throughout the device's lifetime to facilitate an accurate description of device/circuit functionality for high-frequency applications. Secondly, to explore the potential of high-frequency characterization as the means of scanning reliability effects within devices. S-parameters served as the high-frequency device's response and mapped onto a small-signal model to analyze different components of a fully depleted silicon-on-insulator MOSFET. The studied devices are subjected to two important DC stress patterns, i.e., Bias temperature instability stress and hot carrier stress. The hot carrier stress, which inherently suffers from the self-heating effect, resulted in the transistor's geometry-dependent magnitudes of hot carrier degradation. It is shown that the incorporation of the thermal resistance model is mandatory for the investigation of hot carrier degradation. The property of direct translation of small-signal parameter degradation to DC parameter degradation is used to develop a new S-parameter based bias temperature instability characterization methodology. The changes in gate-related small-signal capacitances after hot carrier stress reveals a distinct signature due to local change of flat-band voltage. The measured effects of gate-related small-signal capacitances post-stress are validated through transient physics-based simulations in Sentaurus TCAD.:Abstract Symbols Acronyms 1 Introduction 2 Fundamentals 2.1 MOSFETs Scaling Trends and Challenges 2.1.1 Silicon on Insulator Technology 2.1.2 FDSOI Technology 2.2 Reliability of Semiconductor Devices 2.3 RF Reliability 2.4 MOSFET Degradation Mechanisms 2.4.1 Hot Carrier Degradation 2.4.2 Bias Temperature Instability 2.5 Self-heating 3 RF Characterization of fully-depleted Silicon on Insulator devices 3.1 Scattering Parameters 3.2 S-parameters Measurement Flow 3.2.1 Calibration 3.2.2 De-embedding 3.3 Small-Signal Model 3.3.1 Model Parameters Extraction 3.3.2 Transistor Figures of Merit 3.4 Characterization Results 4 Self-heating assessment in Multi-finger Devices 4.1 Self-heating Characterization Methodology 4.1.1 Output Conductance Frequency dependence 4.1.2 Temperature dependence of Drain Current 4.2 Thermal Resistance Behavior 4.2.1 Thermal Resistance Scaling with number of fingers 4.2.2 Thermal Resistance Scaling with finger spacing 4.2.3 Thermal Resistance Scaling with GateWidth 4.2.4 Thermal Resistance Scaling with Gate length 4.3 Thermal Resistance Model 4.4 Design for Thermal Resistance Optimization 5 Bias Temperature Instability Investigation 5.1 Impact of Bias Temperature Instability stress on Device Metrics 5.1.1 Experimental Details 5.1.2 DC Parameters Drift 5.1.3 RF Small-Signal Parameters Drift 5.2 S-parameter based on-the-fly Bias Temperature Instability Characterization Method 5.2.1 Measurement Methodology 5.2.2 Results and Discussion 6 Investigation of Hot-carrier Degradation 6.1 Impact of Hot-carrier stress on Device performance 6.1.1 DC Metrics Degradation 6.1.2 Impact on small-signal Parameters 6.2 Implications of Self-heating on Hot-carrier Degradation in n-MOSFETs 6.2.1 Inclusion of Thermal resistance in Hot-carrier Degradation modeling 6.2.2 Convolution of Bias Temperature Instability component in Hot-carrier Degradation 6.2.3 Effect of Source and Drain Placement in Multi-finger Layout 6.3 Vth turn-around effect in p-MOSFET 7 Deconvolution of Hot-carrier Degradation and Bias Temperature Instability using Scattering parameters 7.1 Small-Signal Parameter Signatures for Hot-carrier Degradation and Bias Temperature Instability 7.2 TCAD Dynamic Simulation of Defects 7.2.1 Fixed Charges 7.2.2 Interface Traps near Gate 7.2.3 Interface Traps near Spacer Region 7.2.4 Combination of Traps 7.2.5 Drain Series Resistance effect 7.2.6 DVth Correction 7.3 Empirical Modeling based deconvolution of Hot-carrier Degradation 8 Conclusion and Recommendations 8.1 General Conclusions 8.2 Recommendations for Future Work A Directly measured S-parameters and extracted Y-parameters B Device Dimensions for Thermal Resistance Modeling C Frequency response of hot-carrier degradation (HCD) D Localization Effect of Interface Traps Bibliograph

Caractérisation, mécanismes et applications mémoire des transistors avancés sur SOI

Ce travail présente les principaux résultats obtenus avec une large gamme de dispositifs SOI avancés, candidats très prometteurs pour les futurs générations de transistors MOSFETs. Leurs propriétés électriques ont été analysées par des mesures systématiques, agrémentées par des modèles analytiques et/ou des simulations numériques. Nous avons également proposé une utilisation originale de dispositifs FinFETs fabriqués sur ONO enterré en fonctionnalisant le ONO à des fins d'application mémoire non volatile, volatile et unifiées. Après une introduction sur l'état de l'art des dispositifs avancés en technologie SOI, le deuxième chapitre a été consacré à la caractérisation détaillée des propriétés de dispositifs SOI planaires ultra- mince (épaisseur en dessous de 7 nm) et multi-grille. Nous avons montré l excellent contrôle électrostatique par la grille dans les transistors très courts ainsi que des effets intéressants de transport et de couplage. Une approche similaire a été utilisée pour étudier et comparer des dispositifs FinFETs à double grille et triple grille. Nous avons démontré que la configuration FinFET double grille améliore le couplage avec la grille arrière, phénomène important pour des applications à tension de seuil multiple. Nous avons proposé des modèles originaux expliquant l'effet de couplage 3D et le comportement de la mobilité dans des TFTs nanocristallin ZnO. Nos résultats ont souligné les similitudes et les différences entre les transistors SOI et à base de ZnO. Des mesures à basse température et de nouvelles méthodes d'extraction ont permis d'établir que la mobilité dans le ZnO et la qualité de l'interface ZnO/SiO2 sont remarquables. Cet état de fait ouvre des perspectives intéressantes pour l'utilisation de ce type de matériaux aux applications innovantes de l'électronique flexible. Dans le troisième chapitre, nous nous sommes concentrés sur le comportement de la mobilité dans les dispositifs SOI planaires et FinFET en effectuant des mesures de magnétorésistance à basse température. Nous avons mis en évidence expérimentalement un comportement de mobilité inhabituel (multi-branche) obtenu lorsque deux ou plusieurs canaux coexistent et interagissent. Un autre résultat original concerne l existence et l interprétation de la magnétorésistance géométrique dans les FinFETs.L'utilisation de FinFETs fabriqués sur ONO enterré en tant que mémoire non volatile flash a été proposée dans le quatrième chapitre. Deux mécanismes d'injection de charge ont été étudiés systématiquement. En plus de la démonstration de la pertinence de ce type mémoire en termes de performances (rétention, marge de détection), nous avons mis en évidence un comportement inattendu : l amélioration de la marge de détection pour des dispositifs à canaux courts. Notre concept innovant de FinFlash sur ONO enterré présente plusieurs avantages: (i) opération double-bit et (ii) séparation de la grille de stockage et de l'interface de lecture augmentant la fiabilité et autorisant une miniaturisation plus poussée que des Finflash conventionnels avec grille ONO.Dans le dernier chapitre, nous avons exploré le concept de mémoire unifiée, en combinant les opérations non volatiles et 1T-DRAM par le biais des FinFETs sur ONO enterré. Comme escompté pour les mémoires dites unifiées, le courant transitoire en mode 1T-DRAM dépend des charges non volatiles stockées dans le ONO. D'autre part, nous avons montré que les charges piégées dans le nitrure ne sont pas perturbées par les opérations de programmation et lecture de la 1T-DRAM. Les performances de cette mémoire unifiée multi-bits sont prometteuses et pourront être considérablement améliorées par optimisation technologique de ce dispositif.The evolution of electronic systems and portable devices requires innovation in both circuit design and transistor architecture. During last fifty years, the main issue in MOS transistor has been the gate length scaling down. The reduction of power consumption together with the co-integration of different functions is a more recent avenue. In bulk-Si planar technology, device shrinking seems to arrive at the end due to the multiplication of parasitic effects. The relay has been taken by novel SOI-like device architectures. In this perspective, this manuscript presents the main achievements of our work obtained with a variety of advanced fully depleted SOI MOSFETs, which are very promising candidates for next generation MOSFETs. Their electrical properties have been analyzed by systematic measurements and clarified by analytical models and/or simulations. Ultimately, appropriate applications have been proposed based on their beneficial features.In the first chapter, we briefly addressed the short-channel effects and the diverse technologies to improve device performance. The second chapter was dedicated to the detailed characterization and interesting properties of SOI devices. We have demonstrated excellent gate control and high performance in ultra-thin FD SOI MOSFET. The SCEs are efficiently suppressed by decreasing the body thickness below 7 nm. We have investigated the transport and electrostatic properties as well as the coupling mechanisms. The strong impact of body thickness and temperature range has been outlined. A similar approach was used to investigate and compare vertical double-gate and triple-gate FinFETs. DG FinFETs show enhanced coupling to back-gate bias which is applicable and suitable for dynamic threshold voltage tuning. We have proposed original models explaining the 3D coupling effect in FinFETs and the mobility behavior in ZnO TFTs. Our results pointed on the similarities and differences in SOI and ZnO transistors. According to our low-temperature measurements and new promoted extraction methods, the mobility in ZnO and the quality of ZnO/SiO2 interface are respectable, enabling innovating applications in flexible, transparent and power electronics. In the third chapter, we focused on the mobility behavior in planar SOI and FinFET devices by performing low-temperature magnetoresistance measurements. Unusual mobility curve with multi-branch aspect were obtained when two or more channels coexist and interplay. Another original result in the existence of the geometrical magnetoresistance in triple-gate and even double-gate FinFETs.The operation of a flash memory in FinFETs with ONO buried layer was explored in the forth chapter. Two charge injection mechanisms were proposed and systematically investigated. We have discussed the role of device geometry and temperature. Our novel ONO FinFlash concept has several distinct advantages: double-bit operation, separation of storage medium and reading interface, reliability and scalability. In the final chapter, we explored the avenue of unified memory, by combining nonvolatile and 1T-DRAM operations in a single transistor. The key result is that the transient current, relevant for 1T-DRAM operation, depends on the nonvolatile charges stored in the nitride buried layer. On the other hand, the trapped charges are not disturbed by the 1T-DRAM operation. Our experimental data offers the proof-of-concept for such advanced memory. The performance of the unified/multi-bit memory is already decent but will greatly improve in the coming years by processing dedicated devices.SAVOIE-SCD - Bib.électronique (730659901) / SudocGRENOBLE1/INP-Bib.électronique (384210012) / SudocGRENOBLE2/3-Bib.électronique (384219901) / SudocSudocFranceF

Caractérisation électrique et modélisation des transistors FDSOI sub-22nm

Silicon on insulator (SOI) transistors are among the best candidates for sub-22nm technology nodes. At this scale, the devices integrate extremely thin buried oxide layers (BOX) and body. They also integrate advanced high-k dielectric / metal gate stacks and strain engineering is used to improve transport properties with, for instance, the use of SiGe alloys in the channel of p-type MOS transistors. The optimization of such a technology requires precise and non-destructive experimental techniques able to provide information about the quality of electron transport and interface quality, as well as about the real values of physical parameters (dimensions and doping level) at the end of the process. Techniques for parameter extraction from electrical characteristics have been developed over time. The aim of this thesis work is to reconsider these methods and to further develop them to account for the extremely small dimensions used for sub-22nm SOI generations. The work is based on extended characterization and modelling in support. Among the original results obtained during this thesis, special notice should be put on the adaptation of the complete split CV method which is now able to extract the characteristic parameters for the entire stack, from the substrate and its doping level to the gate stack, as well as an extremely detailed analysis of electron transport based on low temperature characterization in back-gate electrostatic coupling conditions or the exploitation of channel magnetoresistance from the linear regime of operation to saturation. Finally, a detailed analysis of low-frequency noise closes this study.Parmi les architectures candidates pour les générations sub-22nm figurent les transistors sur silicium sur isolant (SOI). A cette échelle, les composants doivent intégrer des films isolants enterrés (BOX) et des canaux de conduction (Body) ultra-minces. A ceci s'ajoute l'utilisation d'empilements de grille avancés (diélectriques à haute permittivité / métal de grille) et une ingénierie de la contrainte mécanique avec l'utilisation d'alliages SiGe pour le canal des transistors de type P. La mise au point d'une telle technologie demande qu'on soit capable d'extraire de façon non destructive et avec précision la qualité du transport électronique et des interfaces, ainsi que les valeurs des paramètres physiques (dimensions et dopages), qui sont obtenues effectivement en fin de fabrication. Des techniques d'extraction de paramètres ont été développées au cours du temps. L'objectif de cette thèse est de reconsidérer et de faire évoluer ces techniques pour les adapter aux épaisseurs extrêmement réduites des composants étudiés. Elle combine mesures approfondies et modélisation en support. Parmi les résultats originaux obtenus au cours de cette thèse, citons notamment l'adaptation de la méthode split CV complète qui permet désormais d'extraire les paramètres caractérisant l'ensemble de l'empilement SOI, depuis le substrat et son dopage jusqu'à la grille, ainsi qu'une analyse extrêmement détaillée du transport grâce à des mesures en régime de couplage grille arrière à température variable ou l'exploitation de la magnétorésistance de canal depuis le régime linéaire jusqu'en saturation. Le mémoire se termine par une analyse détaillée du bruit basse fréquence

A surface-potential-based compact model for partially-depleted silicon-on-insulator MOSFETs

With the continuous scaling of CMOS technologies, Silicon-on-Insulator (SOI) technologies have become more competitive compared to bulk, due to their lower parasitic capacitances and leakage currents. The shift towards high frequency, low power circuitry, coupled with the increased maturity of SOI process technologies, have made SOI a genuinely costeffective solution for leading edge applications. The original STAG2 model, developed at the University of Southampton, UK, was among the first compact circuit simulation models to specifically model the behaviour of Partially-Depleted (PD) SOI devices. STAG2 was a robust, surface-potential based compact model, employing closed-form equations to minimise simulation times for large circuits. It was able to simulate circuits in DC, small signal, and transient modes, and particular care was taken to ensure that convergence problems were kept to a minimum. In this thesis, the ongoing development of the STAG model, culminating in the release of a new version, STAG3, is described. STAG3 is intended to make the STAG model applicable to process technologies down to 100nm. To this end, a number of major model improvements were undertaken, including: a new core surface potential model, new vertical and lateral field mobility models, quantum mechanical models, the ability to model non-uniform vertical doping profiles, and other miscellaneous effects relevant to deep submicron devices such as polysilicon depletion, velocity overshoot, and the reverse short channel effect.As with the previous versions of STAG, emphasis has been placed on ensuring that model equations are numerically robust, as well as closed-form wherever possible, in order to minimise convergence problems and circuit simulation times. The STAG3 model has been evaluated with devices manufactured in PD-SOI technologies down to 0.25?m, and was found to give good matching to experimental data across a range of device sizes and biases, whilst requiring only a single set of model parameters