1,925 research outputs found
Energy Beamforming with One-Bit Feedback
Wireless energy transfer (WET) has attracted significant attention recently
for providing energy supplies wirelessly to electrical devices without the need
of wires or cables. Among different types of WET techniques, the radio
frequency (RF) signal enabled far-field WET is most practically appealing to
power energy constrained wireless networks in a broadcast manner. To overcome
the significant path loss over wireless channels, multi-antenna or
multiple-input multiple-output (MIMO) techniques have been proposed to enhance
the transmission efficiency and distance for RF-based WET. However, in order to
reap the large energy beamforming gain in MIMO WET, acquiring the channel state
information (CSI) at the energy transmitter (ET) is an essential task. This
task is particularly challenging for WET systems, since existing channel
training and feedback methods used for communication receivers may not be
implementable at the energy receiver (ER) due to its hardware limitation. To
tackle this problem, in this paper we consider a multiuser MIMO system for WET,
where a multiple-antenna ET broadcasts wireless energy to a group of
multiple-antenna ERs concurrently via transmit energy beamforming. By taking
into account the practical energy harvesting circuits at the ER, we propose a
new channel learning method that requires only one feedback bit from each ER to
the ET per feedback interval. The feedback bit indicates the increase or
decrease of the harvested energy by each ER between the present and previous
intervals, which can be measured without changing the existing hardware at the
ER. Based on such feedback information, the ET adjusts transmit beamforming in
different training intervals and at the same time obtains improved estimates of
the MIMO channels to ERs by applying a new approach termed analytic center
cutting plane method (ACCPM).Comment: This is the longer version of a paper to appear in IEEE Transactions
on Signal Processin
Application of adaptive antenna techniques to future commercial satellite communication
The purpose of this contract was to identify the application of adaptive antenna technique in future operational commercial satellite communication systems and to quantify potential benefits. The contract consisted of two major subtasks. Task 1, Assessment of Future Commercial Satellite System Requirements, was generally referred to as the Adaptive section. Task 2 dealt with Pointing Error Compensation Study for a Multiple Scanning/Fixed Spot Beam Reflector Antenna System and was referred to as the reconfigurable system. Each of these tasks was further sub-divided into smaller subtasks. It should also be noted that the reconfigurable system is usually defined as an open-loop system while the adaptive system is a closed-loop system. The differences between the open- and closed-loop systems were defined. Both the adaptive and reconfigurable systems were explained and the potential applications of such systems were presented in the context of commercial communication satellite systems
Limited feedback MIMO techniques for temporally correlated channels and linear receivers
Advanced mobile wireless networks will make extensive use of multiantenna (MIMO) transceivers to comply with high requirements of data rates and reliability. The use of feedback channels is of paramount importance to achieve this goal in systems employing frequency division duplexing (FDD). The design of the feedback mechanism is challenging due to the severe constraints imposed by computational complexity and feedback bandwidth restrictions.
This thesis addresses the design of transmission strategies in both single-user and multi-user MIMO systems, based on compact feedback messages. First, recursive feedback mechanisms for single-user transmission scenarios are proposed, including stochastic gradient techniques, deterministic updates based on Givens rotations and low computational complexity schemes based on partial update filtering concepts. Thereafter, channel feedback algorithms are proposed, and a convergence analysis for static channels is presented. These algorithms can be used to provide channel side information to any multi-user MIMO solution. A limited-feedback decentralized multi-user MIMO solution is proposed, which avoids the need for explicit channel feedback. A feed-forward technique is proposed, which allows our methods to operate in presence of feedback errors.
The performance of all the proposed algorithms is illustrated via link-level simulations, where the effect of different parameter values is assessed. Our results show that the proposed methods outperform existing limited-feedback counterparts over a range of low to medium mobile speeds, for moderate antenna array sizes that are deemed practical for commercial deployment. The computational complexity reduction of some of the proposed algorithms is also shown to be considerable, when compared to existing techniques
Optimisation of Mobile Communication Networks - OMCO NET
The mini conference “Optimisation of Mobile Communication Networks” focuses on advanced methods for search and optimisation applied to wireless communication networks. It is sponsored by Research & Enterprise Fund Southampton Solent University.
The conference strives to widen knowledge on advanced search methods capable of optimisation of wireless communications networks. The aim is to provide a forum for exchange of recent knowledge, new ideas and trends in this progressive and challenging area. The conference will popularise new successful approaches on resolving hard tasks such as minimisation of transmit power, cooperative and optimal routing
Adaptive antenna selection and Tx/Rx beamforming for large-scale MIMO systems in 60 GHz channels
We consider a large-scale MIMO system operating in the 60 GHz band employing beamforming for high-speed data transmission. We assume that the number of RF chains is smaller than the number of antennas, which motivates the use of antenna selection to exploit the beamforming gain afforded by the large-scale antenna array. However, the system constraint that at the receiver, only a linear combination of the receive antenna outputs is available, which together with the large dimension of the MIMO system makes it challenging to devise an efficient antenna selection algorithm. By exploiting the strong line-of-sight property of the 60 GHz channels, we propose an iterative antenna selection algorithm based on discrete stochastic approximation that can quickly lock onto a near-optimal antenna subset. Moreover, given a selected antenna subset, we propose an adaptive transmit and receive beamforming algorithm based on the stochastic gradient method that makes use of a low-rate feedback channel to inform the transmitter about the selected beams. Simulation results show that both the proposed antenna selection and the adaptive beamforming techniques exhibit fast convergence and near-optimal performance
- …