Differential Difference Current Conveyor (DDCC) Based Schmitt Trigger Circuit & Its Application

A new voltage mode Schmitt trigger and its application using Differential Difference Current Conveyor (DDCC) is presented in this paper. The proposed circuit has a single DDCC block & two passive components. This circuit does not have any matching conditions. Here two passive components are used and one of them is grounded .The proposed circuit is simulated on SPICE platfor

Design of Signal Generators Using Active Elements Developed in I3T25 CMOS Technology Single IC Package for Illuminance to Frequency Conversion

This paper presents a compact and simple design of adjustable triangular and square wave functional generators employing fundamental cells fabricated on a single integrated circuit (IC) package. Two solutions have electronically tunable repeating frequency. The linear adjustability of repeating frequency was verified in the range between 17 and 264 kHz. The main benefits of the proposed generator are the follows: A simple adjustment of the repeating frequency by DC bias current, Schmitt trigger (threshold voltages) setting by DC driving voltage, and output levels in hundreds of mV when the complementary metal-oxide semiconductor (CMOS) process with limited supply voltage levels is used. These generators are suitable to provide a simple conversion of illuminance to frequency of oscillation that can be employed for illuminance measurement and sensing in the agriculture applications. Experimental measurements proved that the proposed concept is usable for sensing of illuminance in the range from 1 up to 500 lx. The change of illuminance within this range causes driving of bias current between 21 and 52 mu A that adjusts repeating frequency between 70 and 154 kHz with an error up to 10% between the expected and real cases

A sub-threshold differential cmos schmitt trigger with adjustable hysteresis based on body bias technique

This paper presents a sub-threshold differential CMOS Schmitt trigger with tunable hysteresis, which can be used to enhance the noise immunity of low-power electronic systems. By exploiting the body bias technique to the positive feedback transistors, the hysteresis of the proposed Schmitt trigger is generated, and it can be adjusted by the applied bias voltage to the bulk terminal of the utilized PMOS transistors. The principle of operation and the main formulas of the proposed circuit are discussed. The circuit is designed in a 0.18-μm standard CMOS process with a 0.6 V power supply. Post-layout simulation results show that the hysteresis width of the Schmitt trigger can be adjusted from 45.5 mV to 162 mV where the ratio of the hysteresis width variation to supply voltage is 19.4%. This circuit consumes 10.52 × 7.91 μm2 of silicon area, and its power consumption is only 1.38 μW, which makes it a suitable candidate for low-power applications such as portable electronic, biomedical, and bio-implantable systems

A Novel Current-Mode Full-Wave Rectifier Based on One CDTA and Two Diodes

Precision rectifiers are important building blocks for analog signal processing. The traditional approach based on diodes and operational amplifiers (OpAmps) exhibits undesirable effects caused by limited OpAmp slew rate and diode commutations. In the paper, a full-wave rectifier based on one CDTA and two Schottky diodes is presented. The PSpice simulation results are included

Realization of DVCCTA Based Versatile Modulator

A Differential Voltage Current Conveyor Transconductance Amplifier (DVCCTA) based versatile modulator is proposed which can work as an amplitude modulator, frequency modulator, delta modulator, and sigma delta modulator. The modulator operational scheme uses pulse generator as a core and its output is used as carrier signal. A DVCCTA based pulse generator is proposed first and subsequently configured as different modulators. Compact realization is the key feature of the proposed circuit as it uses two DVCCTA; a grounded resistor and a grounded capacitor hence are appropriate for IC realization. The functionality of the proposed circuit is verified through SPICE simulations using TSMC 0.25 μm CMOS process model parameters. The performance parameters such as power dissipation and noise for various modulator schemes are also obtained

CMOS Current Feedback Operational Amplifier-Based Relaxation Generator for Capacity to Voltage Sensor Interface

This paper presents a simple relaxation generator, suitable for a sensor interface, operating as a transducer of capacitance to frequency/period. The proposed circuit employs a current feedback operational amplifier, fabricated in I3T25 0.35 m ON Semiconductor CMOS process, and four passive elements including a grounded capacitor (the sensed parameter). It offers a low-impedance voltage output of the generated square wave. Additional frequency to DC voltage converter offers output information in the form of voltage. The experimental capacitance variation from 6.8 nF to 100 nF yields voltage change in the range from 21 mV to 106 mV with error below 5% and sensitivity 0.912 mV/nF evaluated over the full range of change. These values are in good agreement with simulation results obtained from the Mathcad model of frequency to DC voltage transducer passive circuit

Étude des mécanismes des voies mitochondriale et lysosomiale dans l'apoptose p53-indépendante induite par les agents chimiothérapeutiques

Thèse numérisée par la Direction des bibliothèques de l'Université de Montréal

A 256-input micro-electrode array with integrated cmos amplifiers for neural signal recording

Thesis (Ph.D.)--Boston UniversityThe nervous system communicates and processes information through its basic structural units -- individual neurons (nerve cells). Neurons convey neural information via electrical and chemical signals, which makes electrophysiological recording techniques very important in the study of neurophysiology. Specifically, active microelectrode arrays (MEAs) with amplifiers integrated on the same substrate are used because they provide a very powerful neural electrical recording technique that can be directly interfaced to acute slices and cell cultures. 2D planer electrodes are typically used for recording from neural cultures in vitro, while in vivo recording in live animals invariably requires the use of 3D electrodes. I have designed an active MEA with neural amplifiers and 3D electrodes, all integrated on a single chip. The electrodes are commercially available 3D C4 (Controlled Collapse Chip Connect) flip-chip bonding solder balls that have a diameter of 100 µm and a pitch of 200 µm. An active MEA neural recording chip -- the Multiple-Input Neural Sensor (MINS) chip -- was designed and fabricated using the IBM BiCMOS 8HP 0.13 µm technology. The MINS IC has 256 input channels that are time-division multiplexed into two output pads. Each channel was designed to work at a 20 kHz frame rate with a total voltage gain of 60 dB per channel with an input-referred noise voltage of 5.3 µVrms over 10 Hz to 10 kHz. The entire MINS chip has an area of 4 x 4 mm^2 with 256 input C4s plus 20 wire-bond pads on two adjacent edges of the chip for power, control, and outputs. The fabricated MINS chips are wire-bonded to standard pin grid array (PGA), open-top PGA, and custom-designed printed circuit board (PCB) packages for electrical, in vitro, and in vivo testing, respectively. After process variation correction, the voltage gain of the 256 neural amplifiers, measured in vitro across several chips, has a mean value of 58.7 dB and a standard deviation of 0.37 dB. Measurements done with the electrical testing package demonstrate that the MINS IC has a flat frequency response from 0.05 Hz to 1.4 MHz, an input-referred noise voltage of 4.6 µVrms over 10 Hz to 10 kHz, an output voltage swing as large as 1.5 V peak-to-peak, and a total power consumption of 11.25 mW, or 43.9 µW per input channel

Daily Eastern News: April 01, 2004

https://thekeep.eiu.edu/den_2004_apr/1000/thumbnail.jp