Analysis of adaptive algorithms for an integrated communication network

Techniques were examined that trade communication bandwidth for decreased transmission delays. When the network is lightly used, these schemes attempt to use additional network resources to decrease communication delays. As the network utilization rises, the schemes degrade gracefully, still providing service but with minimal use of the network. Because the schemes use a combination of circuit and packet switching, they should respond to variations in the types and amounts of network traffic. Also, a combination of circuit and packet switching to support the widely varying traffic demands imposed on an integrated network was investigated. The packet switched component is best suited to bursty traffic where some delays in delivery are acceptable. The circuit switched component is reserved for traffic that must meet real time constraints. Selected packet routing algorithms that might be used in an integrated network were simulated. An integrated traffic places widely varying workload demands on a network. Adaptive algorithms were identified, ones that respond to both the transient and evolutionary changes that arise in integrated networks. A new algorithm was developed, hybrid weighted routing, that adapts to workload changes

QoS-based multipath routing for the Internet

The new generation of network services is being developed for incorporation in communication infrastructure. These services, generally called Quality of Services (QoS), should accommodate data file, video, and audio applications. The different performance requirements of these applications necessitate a re-examination of the main architectural components of today\u27s networks, which were designed to support traditional data applications. Routing, which determines the sequence of network nodes a packet traverses between source and destination, is one such component. Here, we examine the potential routing problems in future Internet and discuss the advantages of class-based multi-path routing methods. The result is a new approach to routing in packet-switched networks, which is called Two-level Class-based Multipath routing with Prediction (TCMP). In TCMP, we compute multiple paths between each source and destination based on link propagation delay and bottleneck bandwidth. A leaky bucket is adopted in each router to monitor the bottleneck bandwidth on equal paths during the network\u27s stable period, and to guide its traffic forwarDing The TCMP can avoid frequent flooding of routing information in a dynamic routing method; therefore, it can be applied to large network topologies

HORNET: High-speed Onion Routing at the Network Layer

We present HORNET, a system that enables high-speed end-to-end anonymous channels by leveraging next generation network architectures. HORNET is designed as a low-latency onion routing system that operates at the network layer thus enabling a wide range of applications. Our system uses only symmetric cryptography for data forwarding yet requires no per-flow state on intermediate nodes. This design enables HORNET nodes to process anonymous traffic at over 93 Gb/s. HORNET can also scale as required, adding minimal processing overhead per additional anonymous channel. We discuss design and implementation details, as well as a performance and security evaluation.Comment: 14 pages, 5 figure

Planning and verification of multipath routing protocols

Conventionally the problem of the best path in a network refers to the shortest path problem. However, for the vast majority of networks present nowadays this solution has some limitations which directly affect their proper functioning, as well as an inefficient use of their potentialities. Problems at the level of large networks where graphs of high complexity are commonly present as well as the appearing of new services and their respective requirements, are intrinsically related to the inability of this solution. In order to overcome the needs present in these networks, a new approach to the problem of the best path must be explored. One solution that has aroused more interest in the scientific community considers the use of multiple paths between two network nodes, where they can all now be considered as the best path between those nodes. Therefore, the routing will be discontinued only by minimizing one metric, where only one path between nodes is chosen, and shall be made by the selection of one of many paths, thereby allowing the use of a greater diversity of the present paths (obviously, if the network consents). The establishment of multi-path routing in a given network has several advantages for its operation. Its use may well improve the distribution of network traffic, improve recovery time to failure, or it can still offer a greater control of the network by its administrator. These factors still have greater relevance when networks have large dimensions, as well as when their constitution is of high complexity, such as the Internet, where multiple networks managed by different entities are interconnected. A large part of the growing need to use multipath protocols is associated to the routing made based on policies. Therefore, paths with different characteristics can be considered with equal level of preference, and thus be part of the solution for the best way problem. To perform multi-path routing using protocols based only on the destination address has some limitations but it is possible. Concepts of graph theory of algebraic structures can be used to describe how the routes are calculated and classified, enabling to model the routing problem. This thesis studies and analyzes multi-path routing protocols from the known literature and derives a new algebraic condition which allows the correct operation of these protocols without any network restriction. It also develops a range of software tools that allows the planning and the respective verification/validation of new protocols models according to the study made

Survey of Routing Algorithms for Computer Networks

This thesis gives a general discussion of routing for computer networks, followed by an overview of a number of typical routing algorithms used or reported in the past few years. Attention is mainly focused on distributed adaptive routing algorithms for packet switching (or message switching) networks. Algorithms for major commercial networks (or network architectures) are reviewed as well, for the convenience of comparison

OBGP based QoS analysis for optical virtual private network connection setup

In a computer network, clients work with different applications; hence there are requirement of speed, bandwidth, delay etc. The parameters are called as Quality of Service (QoS) parameters. QoS guarantees the performance in a network. To meet the growing demand of Optical Virtual Private Network (OVPN), the Internet Service Providers (ISP) should use multiple techniques which ensure the Quality of Service. For performing data communication between nodes in a network the path to be followed should be known. In this project, BGP/OBGP protocols have been discussed and using this protocol, paths have been found between routers. Then the optimal path is found out based on the path attributes. Also the paths are examined for QoS parameters and the best path is chosen. An OVPN model has been discussed and modified for performing Routing & Wavelength Assignment (RWA) function based on QoS requirement which is expressed in terms of Q-factor and trying to achieve minimum blocking probability of path. The objective of this project is to assign best connection between nodes as per the request from clients operating with various applications

Simulation and analysis of adaptive routing and flow control in wide area communication networks

This thesis presents the development of new simulation and analytic models for the performance analysis of wide area communication networks. The models are used to analyse adaptive routing and flow control in fully connected circuit switched and sparsely connected packet switched networks. In particular the performance of routing algorithms derived from the L(_R-I) linear learning automata model are assessed for both types of network. A novel architecture using the INMOS Transputer is constructed for simulation of both circuit and packet switched networks in a loosely coupled multi- microprocessor environment. The network topology is mapped onto an identically configured array of processing centres to overcome the processing bottleneck of conventional Von Neumann architecture machines. Previous analytic work in circuit switched work is extended to include both asymmetrical networks and adaptive routing policies. In the analysis of packet switched networks analytic models of adaptive routing and flow control are integrated to produce a powerful, integrated environment for performance analysis The work concludes that routing algorithms based on linear learning automata have significant potential in both fully connected circuit switched networks and sparsely connected packet switched networks