Enhancements to the Open Access Spectral Band Adjustment Factor Online Calculation Tool for Visible Channels

With close to 40 years of satellite observations, from which, cloud, land-use, and aerosol parameters can be measured, inter-consistent calibrations are needed to normalize retrievals across satellite records. Various visible-sensor inter-calibration techniques have been developed that utilize radiometrically stable Earth targets, e.g., deep convective clouds and desert/polar ice pseudo-invariant calibration sites. Other equally effective, direct techniques for intercalibration between satellite imagers are simultaneous nadir overpass comparisons and ray-matched radiance pairs. Combining independent calibration results from such varied techniques yields robust calibration coefficients, and is a form of self-validation. One potential source of significant error when cross-calibrating satellite sensors, however, are the often small but substantial spectral discrepancies between comparable bands, which must be accounted for. As such, visible calibration methods rely on a Spectral Band Adjustment Factor (SBAF) to account for the spectral-response function- induced radiance differences between analogous imagers. The SBAF is unique to each calibration method as it is a function of the Earth-reflected spectra. In recent years, NASA Langley pioneered the use of SCIAMACHY-, GOME-2-, and Hyperion-retrieved Earth spectra to compute SBAFs. By carefully selecting hyperspectral footprints that best represent the conditions inherent to an inter-calibration technique, the uncertainty in the SBAF is greatly reduced. NASA Langley initially provided the Global Space-based Inter-calibration System processing and research centers with online SBAF tools, with which users select conditions to best match their calibration criteria. This article highlights expanded SBAF tool capabilities for visible wavelengths, with emphasis on the use of the spectral range filtering for the purpose of separating scene conditions for the channel that the SBAF is needed based on the reflectance values of other bands. In other words, spectral filtering will enable better scene-type selection for bands where scene determination is difficult without information from other channels, which should prove valuable to users in the calibration community

Characterization of NPP Visible/Infrared Imager Radiometer Suite (VIIRS) Reflective Solar Bands Dual Gain Anomaly

The Visible/Infrared Imager Radiometer Suite (VIIRS) contains six dual gain bands in the reflective solar spectrum. The dual gain bands are designed to switch gain mode at pre-defined thresholds to achieve high resolution at low radiances while maintaining the required dynamic range for science. During pre-launch testing, an anomaly in the electronic response before transitioning from high to low gain was discovered and characterized. On-orbit, the anomaly was confirmed using MODIS data collected during Simultaneous Nadir Overpasses (SNOs). The analysis of the Earth scene data shows that dual gain anomaly can be determined at the orbital basis. To characterize the dual gain anomaly, the anomaly region and electronic offsets were tracked per week during the first 8 month of VIIRS operation. The temporal analysis shows the anomaly region can drift ~20 DN and is impacted by detectors DC Restore. The estimated anomaly flagging regions cover ~2.5 % of the high gain dynamic range and are consistent with prelaunch and on-orbit LUT. The prelaunch results had a smaller anomaly range (30-50 DN) and are likely the results of more stable electronics from the shorter data collection time. Finally, this study suggests future calibration efforts to focus on the anomaly's impact on science products and possible correction method to reduce uncertainties

Retrieving Near-Global Aerosol Loading over Land and Ocean from AVHRR

The spaceborne AVHRR sensors have provided a data record approaching 40 years, which is a crucial asset for studying the long-term trends of aerosol properties on both a global and regional basis. However, due to the limitations on its channels and information content, aerosol optical depth (AOD) data from AVHRR over land are still largely lacking. In this paper, we describe a new physics-based algorithm to retrieve global aerosol properties over both land and ocean from AVHRR for the first time. The over-land algorithm is an extension of our SeaWiFSMODIS Deep Blue algorithm, while a simplified version of the Satellite Ocean Aerosol Retrieval (SOAR) algorithm is used over ocean. We compare the retrieved AVHRR AOD values with those from MODIS collection 6 aerosol products on a daily and seasonal basis, and find in general good agreement between the two. For the satellites with equatorial crossing times within two hours of solar noon, the spatial coverage of the AVHRR aerosol product is comparable to that of MODIS, except over very bright arid regions (such as the Sahara and deserts in the Arabian Peninsula), where the underlying surface reflectance at 630 nm reaches the critical surface reflectance. Based upon comparisons of the AVHRR AOD against the AERONET data, the preliminary results indicate that the expected error is around +/-(0.03+15%) over ocean and +/-(0.05+25%) over land for this first version of the AVHRR aerosol products. Consequently, these new AVHRR aerosol products can contribute important building blocks for constructing a consistent long-term data record for climate studies

Cloud Detection And Trace Gas Retrieval From The Next Generation Satellite Remote Sensing Instruments

Thesis (Ph.D.) University of Alaska Fairbanks, 2005The objective of this thesis is to develop a cloud detection algorithm suitable for the National Polar Orbiting Environmental Satellite System (NPOESS) Visible Infrared Imaging Radiometer Suite (VIIRS) and methods for atmospheric trace gas retrieval for future satellite remote sensing instruments. The development of this VIIRS cloud mask required a flowdown process of different sensor models in which a variety of sensor effects were simulated and evaluated. This included cloud simulations and cloud test development to investigate possible sensor effects, and a comprehensive flowdown analysis of the algorithm was conducted. In addition, a technique for total column water vapor retrieval using shadows was developed with the goal of enhancing water vapor retrievals under hazy atmospheric conditions. This is a new technique that relies on radiance differences between clear and shadowed surfaces, combined with ratios between water vapor absorbing and window regions. A novel method for retrieving methane amounts over water bodies, including lakes, rivers, and oceans, under conditions of sun glint has also been developed. The theoretical basis for the water vapor as well as the methane retrieval techniques is derived and simulated using a radiative transfer model

CIRA annual report FY 2016/2017

Reporting period April 1, 2016-March 31, 2017

Toward an assessment of the fitness-for-purpose of Copernicus ocean colour data

The Copernicus Program has been established through the Regulation EU No377/2014 with the objective to ensure long-term and sustained provision of accurate and reliable data on environment and security through dedicated services. Among these, the Copernicus Marine Environment Monitoring Service and the marine component of the Climate Change Service, both rely on satellite ocean colour observations delivering data on water quality and climate relevant quantities such as chlorophyll-a concentration used as a proxy for phytoplankton biomass. This Report, building on the long-standing experience of the JRC on ocean colour, summarizes a number of recent investigations essential to assess the fitness-for-purpose of Copernicus ocean colour data products. These investigations embrace: i. The accuracy of radiometry data from the Ocean and Land Colour Instrument (OLCI) on board Sentinel-3a. The assessment is performed relying on geographically distributed in situ reference measurements from autonomous systems and dedicated oceanographic campaigns. ii. Uncertainty analysis of ocean colours radiometry data from a number of international missions. The analysis aims at assessing the potentials for the construction of Climate Data Records (CDRs) from independent missions. iii. The impact of adjacency effects in coastal data limiting the accuracy of ocean colour radiometry products. The study relies on state-of-the-art radiative transfer simulations and aims at quantifying adjacency effects in space data from sensors exhibiting different signal-to-noise ratios. iv. Uncertainties affecting in situ radiometry data as a result of the lack of comprehensive characterizations of field instruments. This is an attempt to illustrate the fundamental importance of comprehensive radiometric calibrations and characterizations for in situ instruments supporting validation activities. v. Reproducibility of the experimental determination of pigments concentrations for the validation of satellite data products. The analysis documents the differences affecting the quantification of pigments concentrations through the applicationJRC.D.2-Water and Marine Resource

CIRA annual report FY 2015/2016

Reporting period April 1, 2015-March 31, 2016

Development of a Mid-Infrared Sea and Lake Ice Index (MISI) Using the GOES Imager

An automated ice-mapping algorithm has been developed and evaluated using data from the GOES-13 imager. The approach includes cloud-free image compositing as well as image classification using spectral criteria. The algorithm uses an alternative snow index to the Normalized Difference Snow Index (NDSI). The GOES-13 imager does not have a 1.6 µm band, a requirement for NDSI; however, the newly proposed Mid-Infrared Sea and Lake Ice Index (MISI) incorporates the reflective component of the 3.9 µm or mid-infrared (MIR) band, which the GOES-13 imager does operate. Incorporating MISI into a sea or lake ice mapping algorithm allows for mapping of thin or broken ice with no snow cover (nilas, frazil ice) and thicker ice with snow cover to a degree of confidence that is comparable to other ice mapping products. The proposed index has been applied over the Great Lakes region and qualitatively compared to the Interactive Multi-sensor Snow and Ice Mapping System (IMS), the National Ice Center ice concentration maps and MODIS snow cover products. The application of MISI may open additional possibilities in climate research using historical GOES imagery. Furthermore, MISI may be used in addition to the current NDSI in ice identification to build more robust ice-mapping algorithms for the next generation GOES satellites

New Approach for Temporal Stability Evaluation of Pseudo-Invariant Calibration Sites (PICS)

Pseudo-Invariant Calibration Sites (PICS) are one of the most popular methods for in-flight vicarious radiometric calibration of Earth remote sensing satellites. The fundamental question of PICS temporal stability has not been adequately addressed. However, the main purpose of this work is to evaluate the temporal stability of a few PICS using a new approach. The analysis was performed over six PICS (Libya 1, Libya 4, Niger 1, Niger 2, Egypt 1 and Sudan 1). The concept of a Virtual Constellation was developed to provide greater temporal coverage and also to overcome the dependence limitation of any specific characteristic derived from one particular sensor. TOA reflectance data from four sensors consistently demonstrating stable calibration to within 5%the Landsat 7 ETM+ (Enhanced Thematic Mapper Plus), Landsat 8 OLI (Operational Land Imager), Terra MODIS (Moderate Resolution Imaging Spectroradiometer) and Sentinel-2A MSI (Multispectral Instrument)were merged into a seamless dataset. Instead of using the traditional method of trend analysis (Students T test), a nonparametric Seasonal Mann-Kendall test was used for determining the PICS stability. The analysis results indicate that Libya 4 and Egypt 1 do not exhibit any monotonic trend in six reflective solar bands common to all of the studied sensors, indicating temporal stability. A decreasing monotonic trend was statistically detected in all bands, except SWIR 2, for Sudan 1 and the Green and Red bands for Niger 1. An increasing trend was detected in the Blue band for Niger 2 and the NIR band for Libya 1. These results do not suggest abandoning PICS as a viable calibration source. Rather, they indicate that PICS temporal stability cannot be assumed and should be regularly monitored as part of the sensor calibration process

Satellite based methane emission estimation for flaring activities in oil and gas industry: A data-driven approach(SMEEF-OGI)

Klimaendringer, delvis utløst av klimagassutslipp, utgjør en kritisk global utfordring. Metan, en svært potent drivhusgass med et globalt oppvarmings potensial på 80 ganger karbondioksid, er en betydelig bidragsyter til denne krisen. Kilder til metanutslipp inkluderer olje- og gassindustrien, landbruket og avfallshåndteringen, med fakling i olje- og gassindustrien som en betydelig utslippskilde. Fakling, en standard prosess i olje- og gassindustrien, antas ofte å være 98 % effektiv ved omdannelse av metan til mindre skadelig karbondioksid. Nyere forskning fra University of Michigan, Stanford, Environmental Defense Fund og Scientific Aviation indikerer imidlertid at den allment aksepterte effektiviteten på 98 % av fakling ved konvertering av metan til karbondioksid, en mindre skadelig klimagass, kan være unøyaktig. Denne undersøkelsen revurderer fakkelprosessens effektivitet og dens rolle i metankonvertering. Dette arbeidet fokuserer på å lage en metode for uavhengig å beregne metanutslipp fra olje- og gassvirksomhet for å løse dette problemet. Satellittdata, som er et nyttig verktøy for å beregne klimagassutslipp fra ulike kilder, er inkludert i den foreslåtte metodikken. I tillegg til standard overvåkingsteknikker, tilbyr satellittdata en uavhengig, ikke-påtrengende, rimelig og kontinuerlig overvåkingstilnærming. På bakgrunn av dette er problemstillingen for dette arbeidet følgende "Hvordan kan en datadrevet tilnærming utvikles for å forbedre nøyaktigheten og kvaliteten på estimering av metanutslipp fra faklingsaktiviteter i olje- og gassindustrien, ved å bruke satellittdata fra utvalgte plattformer for å oppdage og kvantifisere fremtidige utslipp basert på maskinlæring mer effektivt?" For å oppnå dette ble følgende mål og aktiviteter utført. * Teoretisk rammeverk og sentrale begreper * Teknisk gjennomgang av dagens toppmoderne satellittplattformer og eksisterende litteratur. * Utvikling av et Proof of Concept * Foreslå en evaluering av metoden * Anbefalinger og videre arbeid Dette arbeidet har tatt i bruk en systematisk tilnærming, som starter med et omfattende teoretisk rammeverk for å forstå bruken av fakling, de miljømessige implikasjonene av metan, den nåværende «state-of-the-art» av forskning, og «state-of-the-art» i felt for fjernmåling via satellitter. Basert på rammeverket utviklet i de innledende fasene av dette arbeidet, ble det formulert en datadrevet metodikk, som benytter VIIRS-datasettet for å få geografiske områder av interesse. Hyperspektrale data og metandata ble samlet fra Sentinel-2 og Sentinel-5P satellittdatasettet. Denne informasjonen ble behandlet via en foreslått rørledning, med innledende justering og forbedring. I dette arbeidet ble bildene forbedret ved å beregne den normaliserte brennindeksen. Resultatet var et datasett som inneholdt plasseringen av kjente fakkelsteder, med data fra både Sentinel-2 og Sentinel-5P-satellitten. Resultatene understreker forskjellene i dekningen mellom Sentinel-2- og Sentinel-5P-data, en faktor som potensielt kan påvirke nøyaktigheten av metanutslippsestimater. De anvendte forbehandlingsteknikkene forbedret dataklarheten og brukervennligheten markant, men deres effektivitet kan avhenge av fakkelstedenes spesifikke egenskaper og rådatakvaliteten. Dessuten, til tross for visse begrensninger, ga kombinasjonen av Sentinel-2 og Sentinel-5P-data effektivt et omfattende datasett egnet for videre analyse. Avslutningsvis introduserer dette prosjektet en oppmuntrende metodikk for å estimere metanutslipp fra fakling i olje- og gassindustrien. Den legger et grunnleggende springbrett for fremtidig forskning, og forbedrer kontinuerlig presisjonen og kvaliteten på data for å bekjempe klimaendringer. Denne metodikken kan sees i flytskjemaet nedenfor. Basert på arbeidet som er gjort i dette prosjektet, kan fremtidig arbeid fokusere på å innlemme alternative kilder til metan data, utvide interesseområdene gjennom industrisamarbeid og forsøke å trekke ut ytterligere detaljer gjennom bildesegmenteringsmetoder. Dette prosjektet legger et grunnlag, og baner vei for påfølgende utforskninger å bygge videre på.Climate change, precipitated in part by greenhouse gas emissions, presents a critical global challenge. Methane, a highly potent greenhouse gas with a global warming potential of 80 times that of carbon dioxide, is a significant contributor to this crisis. Sources of methane emissions include the oil and gas industry, agriculture, and waste management, with flaring in the oil and gas industry constituting a significant emission source. Flaring, a standard process in the Oil and gas industry is often assumed to be 98% efficient when converting methane to less harmful carbon dioxide. However, recent research from the University of Michigan, Stanford, the Environmental Defense Fund, and Scientific Aviation indicates that the widely accepted 98% efficiency of flaring in converting methane to carbon dioxide, a less harmful greenhouse gas, may be inaccurate. This investigation reevaluates the flaring process's efficiency and its role in methane conversion. This work focuses on creating a method to independently calculate methane emissions from oil and gas activities to solve this issue. Satellite data, which is a helpful tool for calculating greenhouse gas emissions from various sources, is included in the suggested methodology. In addition to standard monitoring techniques, satellite data offers an independent, non-intrusive, affordable, and continuous monitoring approach. Based on this, the problem statement for this work is the following “How can a data-driven approach be developed to enhance the accuracy and quality of methane emission estimation from flaring activities in the Oil and Gas industry, using satellite data from selected platforms to detect and quantify future emissions based on Machine learning more effectively?" To achieve this, the following objectives and activities were performed. * Theoretical Framework and key concepts * Technical review of the current state-of-the-art satellite platforms and existing literature. * Development of a Proof of Concept * Proposing an evaluation of the method * Recommendations and further work This work has adopted a systematic approach, starting with a comprehensive theoretical framework to understand the utilization of flaring, the environmental implications of methane, the current state-of-the-art of research, and the state-of-the-art in the field of remote sensing via satellites. Based upon the framework developed during the initial phases of this work, a data-driven methodology was formulated, utilizing the VIIRS dataset to get geographical areas of interest. Hyperspectral and methane data were aggregated from the Sentinel-2 and Sentinel-5P satellite dataset. This information was processed via a proposed pipeline, with initial alignment and enhancement. In this work, the images were enhanced by calculating the Normalized Burn Index. The result was a dataset containing the location of known flare sites, with data from both the Sentinel-2, and the Sentinel-5P satellite. The results underscore the disparities in coverage between Sentinel-2 and Sentinel-5P data, a factor that could potentially influence the precision of methane emission estimates. The applied preprocessing techniques markedly enhanced data clarity and usability, but their efficacy may hinge on the flaring sites' specific characteristics and the raw data quality. Moreover, despite certain limitations, the combination of Sentinel-2 and Sentinel-5P data effectively yielded a comprehensive dataset suitable for further analysis. In conclusion, this project introduces an encouraging methodology for estimating methane emissions from flaring activities within the oil and gas industry. It lays a foundational steppingstone for future research, continually enhancing the precision and quality of data in combating climate change. This methodology can be seen in the flow chart below. Based on the work done in this project, future work could focus on incorporating alternative sources of methane data, broadening the areas of interest through industry collaboration, and attempting to extract further features through image segmentation methods. This project signifies a start, paving the way for subsequent explorations to build upon. Climate change, precipitated in part by greenhouse gas emissions, presents a critical global challenge. Methane, a highly potent greenhouse gas with a global warming potential of 80 times that of carbon dioxide, is a significant contributor to this crisis. Sources of methane emissions include the oil and gas industry, agriculture, and waste management, with flaring in the oil and gas industry constituting a significant emission source. Flaring, a standard process in the Oil and gas industry is often assumed to be 98% efficient when converting methane to less harmful carbon dioxide. However, recent research from the University of Michigan, Stanford, the Environmental Defense Fund, and Scientific Aviation indicates that the widely accepted 98% efficiency of flaring in converting methane to carbon dioxide, a less harmful greenhouse gas, may be inaccurate. This investigation reevaluates the flaring process's efficiency and its role in methane conversion. This work focuses on creating a method to independently calculate methane emissions from oil and gas activities to solve this issue. Satellite data, which is a helpful tool for calculating greenhouse gas emissions from various sources, is included in the suggested methodology. In addition to standard monitoring techniques, satellite data offers an independent, non-intrusive, affordable, and continuous monitoring approach. Based on this, the problem statement for this work is the following “How can a data-driven approach be developed to enhance the accuracy and quality of methane emission estimation from flaring activities in the Oil and Gas industry, using satellite data from selected platforms to detect and quantify future emissions based on Machine learning more effectively?" To achieve this, the following objectives and activities were performed. * Theoretical Framework and key concepts * Technical review of the current state-of-the-art satellite platforms and existing literature. * Development of a Proof of Concept * Proposing an evaluation of the method * Recommendations and further work This work has adopted a systematic approach, starting with a comprehensive theoretical framework to understand the utilization of flaring, the environmental implications of methane, the current state-of-the-art of research, and the state-of-the-art in the field of remote sensing via satellites. Based upon the framework developed during the initial phases of this work, a data-driven methodology was formulated, utilizing the VIIRS dataset to get geographical areas of interest. Hyperspectral and methane data were aggregated from the Sentinel-2 and Sentinel-5P satellite dataset. This information was processed via a proposed pipeline, with initial alignment and enhancement. In this work, the images were enhanced by calculating the Normalized Burn Index. The result was a dataset containing the location of known flare sites, with data from both the Sentinel-2, and the Sentinel-5P satellite. The results underscore the disparities in coverage between Sentinel-2 and Sentinel-5P data, a factor that could potentially influence the precision of methane emission estimates. The applied preprocessing techniques markedly enhanced data clarity and usability, but their efficacy may hinge on the flaring sites' specific characteristics and the raw data quality. Moreover, despite certain limitations, the combination of Sentinel-2 and Sentinel-5P data effectively yielded a comprehensive dataset suitable for further analysis. In conclusion, this project introduces an encouraging methodology for estimating methane emissions from flaring activities within the oil and gas industry. It lays a foundational steppingstone for future research, continually enhancing the precision and quality of data in combating climate change. This methodology can be seen in the flow chart below. Based on the work done in this project, future work could focus on incorporating alternative sources of methane data, broadening the areas of interest through industry collaboration, and attempting to extract further features through image segmentation methods. This project signifies a start, paving the way for subsequent explorations to build upon