Antenna array calibration in wireless communications

Imperial Users onl

Indoor wireless communications and applications

Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter

Efficient Covariance Matrix Reconstruction with Iterative Spatial Spectrum Sampling

This work presents a cost-effective technique for designing robust adaptive beamforming algorithms based on efficient covariance matrix reconstruction with iterative spatial power spectrum (CMR-ISPS). The proposed CMR-ISPS approach reconstructs the interference-plus-noise covariance (INC) matrix based on a simplified maximum entropy power spectral density function that can be used to shape the directional response of the beamformer. Firstly, we estimate the directions of arrival (DoAs) of the interfering sources with the available snapshots. We then develop an algorithm to reconstruct the INC matrix using a weighted sum of outer products of steering vectors whose coefficients can be estimated in the vicinity of the DoAs of the interferences which lie in a small angular sector. We also devise a cost-effective adaptive algorithm based on conjugate gradient techniques to update the beamforming weights and a method to obtain estimates of the signal of interest (SOI) steering vector from the spatial power spectrum. The proposed CMR-ISPS beamformer can suppress interferers close to the direction of the SOI by producing notches in the directional response of the array with sufficient depths. Simulation results are provided to confirm the validity of the proposed method and make a comparison to existing approachesComment: 14 pages, 8 figure

Eigenvector prediction-based precoding for massive MIMO with mobility

Eigenvector decomposition (EVD) is an inevitable operation to obtain the precoders in practical massive multiple-input multiple-output (MIMO) systems. Due to the large antenna size and at finite computation resources at the base station (BS), the overwhelming computation complexity of EVD is one of the key limiting factors of the system performance. To address this problem, we propose an eigenvector prediction (EGVP) method by interpolating the precoding matrix with predicted eigenvectors. The basic idea is to exploit a few historical precoders to interpolate the rest of them without EVD of the channel state information (CSI). We transform the nonlinear EVD into a linear prediction problem and prove that the prediction of the eigenvectors can be achieved with a complex exponential model. Furthermore, a channel prediction method called fast matrix pencil prediction (FMPP) is proposed to cope with the CSI delay when applying the EGVP method in mobility environments. The asymptotic analysis demonstrates how many samples are needed to achieve asymptotically error-free eigenvector predictions and channel predictions. Finally, the simulation results demonstrate the spectral efficiency improvement of our scheme over the benchmarks and the robustness to different mobility scenarios.Comment: 13pages, 7 figures, 1 table, journa

System capacity enhancement for 5G network and beyond

A thesis submitted to the University of Bedfordshire, in fulfilment of the requirements for the degree of Doctor of PhilosophyThe demand for wireless digital data is dramatically increasing year over year. Wireless communication systems like Laptops, Smart phones, Tablets, Smart watch, Virtual Reality devices and so on are becoming an important part of people’s daily life. The number of mobile devices is increasing at a very fast speed as well as the requirements for mobile devices such as super high-resolution image/video, fast download speed, very short latency and high reliability, which raise challenges to the existing wireless communication networks. Unlike the previous four generation communication networks, the fifth-generation (5G) wireless communication network includes many technologies such as millimetre-wave communication, massive multiple-input multiple-output (MIMO), visual light communication (VLC), heterogeneous network (HetNet) and so forth. Although 5G has not been standardised yet, these above technologies have been studied in both academia and industry and the goal of the research is to enhance and improve the system capacity for 5G networks and beyond by studying some key problems and providing some effective solutions existing in the above technologies from system implementation and hardware impairments’ perspective. The key problems studied in this thesis include interference cancellation in HetNet, impairments calibration for massive MIMO, channel state estimation for VLC, and low latency parallel Turbo decoding technique. Firstly, inter-cell interference in HetNet is studied and a cell specific reference signal (CRS) interference cancellation method is proposed to mitigate the performance degrade in enhanced inter-cell interference coordination (eICIC). This method takes carrier frequency offset (CFO) and timing offset (TO) of the user’s received signal into account. By reconstructing the interfering signal and cancelling it afterwards, the capacity of HetNet is enhanced. Secondly, for massive MIMO systems, the radio frequency (RF) impairments of the hardware will degrade the beamforming performance. When operated in time duplex division (TDD) mode, a massive MIMO system relies on the reciprocity of the channel which can be broken by the transmitter and receiver RF impairments. Impairments calibration has been studied and a closed-loop reciprocity calibration method is proposed in this thesis. A test device (TD) is introduced in this calibration method that can estimate the transmitters’ impairments over-the-air and feed the results back to the base station via the Internet. The uplink pilots sent by the TD can assist the BS receivers’ impairment estimation. With both the uplink and downlink impairments estimates, the reciprocity calibration coefficients can be obtained. By computer simulation and lab experiment, the performance of the proposed method is evaluated. Channel coding is an essential part of a wireless communication system which helps fight with noise and get correct information delivery. Turbo codes is one of the most reliable codes that has been used in many standards such as WiMAX and LTE. However, the decoding process of turbo codes is time-consuming and the decoding latency should be improved to meet the requirement of the future network. A reverse interleave address generator is proposed that can reduce the decoding time and a low latency parallel turbo decoder has been implemented on a FPGA platform. The simulation and experiment results prove the effectiveness of the address generator and show that there is a trade-off between latency and throughput with a limited hardware resource. Apart from the above contributions, this thesis also investigated multi-user precoding for MIMO VLC systems. As a green and secure technology, VLC is achieving more and more attention and could become a part of 5G network especially for indoor communication. For indoor scenario, the MIMO VLC channel could be easily ill-conditioned. Hence, it is important to study the impact of the channel state to the precoding performance. A channel state estimation method is proposed based on the signal to interference noise ratio (SINR) of the users’ received signal. Simulation results show that it can enhance the capacity of the indoor MIMO VLC system