Point trajectory planning of flexible redundant robot manipulators using genetic algorithms

The paper focuses on the problem of point-to-point trajectory planning for flexible redundant robot manipulators (FRM) in joint space. Compared with irredundant flexible manipulators, a FRM possesses additional possibilities during point-to-point trajectory planning due to its kinematics redundancy. A trajectory planning method to minimize vibration and/or executing time of a point-to-point motion is presented for FRMs based on Genetic Algorithms (GAs). Kinematics redundancy is integrated into the presented method as planning variables. Quadrinomial and quintic polynomial are used to describe the segments that connect the initial, intermediate, and final points in joint space. The trajectory planning of FRM is formulated as a problem of optimization with constraints. A planar FRM with three flexible links is used in simulation. Case studies show that the method is applicable

Integral Resonant Control for vibration damping and precise tip-positioning of a single-link flexible manipulator

Peer reviewedPostprin

A hyper-redundant manipulator

“Hyper-redundant” manipulators have a very large number of actuatable degrees of freedom. The benefits of hyper-redundant robots include the ability to avoid obstacles, increased robustness with respect to mechanical failure, and the ability to perform new forms of robot locomotion and grasping. The authors examine hyper-redundant manipulator design criteria and the physical implementation of one particular design: a variable geometry truss

The impact of local masses and inertias on the dynamic modelling of flexible manipulators

After a brief review of the recent literature dealing with flexible multi-body modelling for control design purpose, the paper first describes three different techniques used to build up the dynamic model of SECAFLEX, a 2 d.o.f. flexible in-plane manipulator driven by geared DC motors : introduction of local fictitious springs, use of a basis of assumed Euler-Bernouilli cantilever-free modes and of 5th order polynomial modes. This last technique allows to take easily into account local masses and inertias, which appear important in real-life experiments. Transformation of the state space models obtained in a common modal basis allows a quantitative comparison of the results obtained, while Bode plots of the various interesting transfer functions relating input torques to output in-joint and tip mea-surements give rather qualitative results. A parametric study of the effect of angular configuration changes and physical parameter modifications (including the effect of rotor inertia) shows that the three techniques give similar results up to the first flexible modes of each link when concentrated masses and inertias are present. From the control point of view, “pathological” cases are exhibited : uncertainty in the phase of the non-colocated transfer functions, high dependence of the free modes in the rotor inertia value. Robustness of the control to these kinds of uncertainties appears compulsory

Energy-based trajectory tracking and vibration control for multilink highly flexible manipulators

In this paper, a discrete model is adopted, as proposed by Hencky for elastica based on rigid bars and lumped rotational springs, to design the control of a lightweight planar manipulator with multiple highly flexible links. This model is particularly suited to deal with nonlinear equations of motion as those associated with multilink robot arms, because it does not include any simplification due to linearization, as in the assumed modes method. The aim of the control is to track a trajectory of the end effector of the robot arm, without the onset of vibrations. To this end, an energy-based method is proposed. Numerical simulations show the effectiveness of the presented approach

Manipulators with flexible links: A simple model and experiments

A simple dynamic model proposed for flexible links is briefly reviewed and experimental control results are presented for different flexible systems. A simple dynamic model is useful for rapid prototyping of manipulators and their control systems, for possible application to manipulator design decisions, and for real time computation as might be applied in model based or feedforward control. Such a model is proposed, with the further advantage that clear physical arguments and explanations can be associated with its simplifying features and with its resulting analytical properties. The model is mathematically equivalent to Rayleigh's method. Taking the example of planar bending, the approach originates in its choice of two amplitude variables, typically chosen as the link end rotations referenced to the chord (or the tangent) motion of the link. This particular choice is key in establishing the advantageous features of the model, and it was used to support the series of experiments reported