Programming MPSoC platforms: Road works ahead

This paper summarizes a special session on multicore/multi-processor system-on-chip (MPSoC) programming challenges. The current trend towards MPSoC platforms in most computing domains does not only mean a radical change in computer architecture. Even more important from a SW developer´s viewpoint, at the same time the classical sequential von Neumann programming model needs to be overcome. Efficient utilization of the MPSoC HW resources demands for radically new models and corresponding SW development tools, capable of exploiting the available parallelism and guaranteeing bug-free parallel SW. While several standards are established in the high-performance computing domain (e.g. OpenMP), it is clear that more innovations are required for successful\ud deployment of heterogeneous embedded MPSoC. On the other hand, at least for coming years, the freedom for disruptive programming technologies is limited by the huge amount of certified sequential code that demands for a more pragmatic, gradual tool and code replacement strategy

Simulation Native des Systèmes Multiprocesseurs sur Puce à l'aide de la Virtualisation Assistée par le Matériel

L'intégration de plusieurs processeurs hétérogènes en un seul système sur puce (SoC) est une tendance claire dans les systèmes embarqués. La conception et la vérification de ces systèmes nécessitent des plateformes rapides de simulation, et faciles à construire. Parmi les approches de simulation de logiciels, la simulation native est un bon candidat grâce à l'exécution native de logiciel embarqué sur la machine hôte, ce qui permet des simulations à haute vitesse, sans nécessiter le développement de simulateurs d'instructions. Toutefois, les techniques de simulation natives existantes exécutent le logiciel de simulation dans l'espace de mémoire partagée entre le matériel modélisé et le système d'exploitation hôte. Il en résulte de nombreux problèmes, par exemple les conflits l'espace d'adressage et les chevauchements de mémoire ainsi que l'utilisation des adresses de la machine hôte plutôt des celles des plates-formes matérielles cibles. Cela rend pratiquement impossible la simulation native du code existant fonctionnant sur la plate-forme cible. Pour surmonter ces problèmes, nous proposons l'ajout d'une couche transparente de traduction de l'espace adressage pour séparer l'espace d'adresse cible de celui du simulateur de hôte. Nous exploitons la technologie de virtualisation assistée par matériel (HAV pour Hardware-Assisted Virtualization) à cet effet. Cette technologie est maintenant disponibles sur plupart de processeurs grande public à usage général. Les expériences montrent que cette solution ne dégrade pas la vitesse de simulation native, tout en gardant la possibilité de réaliser l'évaluation des performances du logiciel simulé. La solution proposée est évolutive et flexible et nous fournit les preuves nécessaires pour appuyer nos revendications avec des solutions de simulation multiprocesseurs et hybrides. Nous abordons également la simulation d'exécutables cross- compilés pour les processeurs VLIW (Very Long Instruction Word) en utilisant une technique de traduction binaire statique (SBT) pour généré le code natif. Ainsi il n'est pas nécessaire de faire de traduction à la volée ou d'interprétation des instructions. Cette approche est intéressante dans les situations où le code source n'est pas disponible ou que la plate-forme cible n'est pas supporté par les compilateurs reciblable, ce qui est généralement le cas pour les processeurs VLIW. Les simulateurs générés s'exécutent au-dessus de notre plate-forme basée sur le HAV et modélisent les processeurs de la série C6x de Texas Instruments (TI). Les résultats de simulation des binaires pour VLIW montrent une accélération de deux ordres de grandeur par rapport aux simulateurs précis au cycle près.Integration of multiple heterogeneous processors into a single System-on-Chip (SoC) is a clear trend in embedded systems. Designing and verifying these systems require high-speed and easy-to-build simulation platforms. Among the software simulation approaches, native simulation is a good candidate since the embedded software is executed natively on the host machine, resulting in high speed simulations and without requiring instruction set simulator development effort. However, existing native simulation techniques execute the simulated software in memory space shared between the modeled hardware and the host operating system. This results in many problems, including address space conflicts and overlaps as well as the use of host machine addresses instead of the target hardware platform ones. This makes it practically impossible to natively simulate legacy code running on the target platform. To overcome these issues, we propose the addition of a transparent address space translation layer to separate the target address space from that of the host simulator. We exploit the Hardware-Assisted Virtualization (HAV) technology for this purpose, which is now readily available on almost all general purpose processors. Experiments show that this solution does not degrade the native simulation speed, while keeping the ability to accomplish software performance evaluation. The proposed solution is scalable as well as flexible and we provide necessary evidence to support our claims with multiprocessor and hybrid simulation solutions. We also address the simulation of cross-compiled Very Long Instruction Word (VLIW) executables, using a Static Binary Translation (SBT) technique to generated native code that does not require run-time translation or interpretation support. This approach is interesting in situations where either the source code is not available or the target platform is not supported by any retargetable compilation framework, which is usually the case for VLIW processors. The generated simulators execute on top of our HAV based platform and model the Texas Instruments (TI) C6x series processors. Simulation results for VLIW binaries show a speed-up of around two orders of magnitude compared to the cycle accurate simulators.SAVOIE-SCD - Bib.électronique (730659901) / SudocGRENOBLE1/INP-Bib.électronique (384210012) / SudocGRENOBLE2/3-Bib.électronique (384219901) / SudocSudocFranceF

A Compilation Flow for Parametric Dataflow: Programming Model, Scheduling, and Application to Heterogeneous MPSoC

International audienceEfficient programming of signal processing applications on embedded systems is a complex problem. High level models such as Synchronous dataflow (SDF) have been privileged candidates for dealing with this complexity. These models permit to express inherent application parallelism, as well as analysis for both verification and optimization. Parametric dataflow models aim at providing sufficient dynamicity to model new applications, while at the same time maintaining the high level of analyzability needed for efficient real life implementations. This paper presents a new compilation flow that targets parametric dataflows. Built on the LLVM compiler infrastructure, it offers an actor based C++ programming model to describe parametric graphs, a compilation front-end providing graph analysis features, and a retargetable back-end to map the application on real hardware. This paper gives an overview of this flow, with a specific focus on scheduling. The crucial gap between dataflow models and real hardware on which actor firing is not atomic, as well as the consequences on FIFOs sizing and execution pipelining are taken into account.The experimental results illustrate our compilation flow applied to compilation of 3GPP LTE-Advanced demodulation on a heterogeneous MPSoC with distributed scheduling features. This achieves performances similar to time-consuming hand made optimizations

Verification of software-hardware hybrid systems

Verification of complex systems with multiple processors is difficult. The reason being that the generation of test cases for the whole system is quite complex. So, the system must be verified in parts and sequentially, i.e., verifying the software, hardware platform separately and the finally software running on the hardware platform. As verification of the MPSoC (Multiple-Systems-on-Chip) platform is beyond the scope of our research, we assume that the MPSoC hardware platform is already verified. Thus, we focus our research on the verification of the MPSoC software (application software running on the MPSoC platform) and the system consisting of the MPSOC software running on the MPSoC platform. Researchers have tried to verify the software portion by generating test cases using metaheutistics, constraint programming and combined metaheuristic- constraint programming approaches. But metaheuristic approaches are not capable of finding good solution as they may get blocked in local optima, whereas constraint programming approaches are not able to generate good test cases when the problem is large and complex. The combined metaheuristic-constraint programming approaches solve these limitations but lose many good test cases when they reduce the domain of the input variables. We want to generate test cases for software while overcoming the limitations mentioned. For this, we propose to combine metaheuristic and constraint programming approaches. In our approach, constraint programming solver will split the input variable domains before reducing them further to be fed into the metaheuristic solver that will generate test cases. Finally, at a later stage of our research, we want to verify the whole system consisting of an application software (DEMOSAIK or FFMPEG 4) running on an MPSoC architecture simulator, the ReSP platform. We propose to generate the test cases from the functional test objectives to check the proper functioning of the software running on the hardware platform. So, we frame the two research questions as: Verification of software by generating test cases so as to satisfy certain coverage criterion and cause the software to fail, and verification of the functional and structural coverage criteria(s) of the system as a whole. We report the results of the preliminary experiments conducted, which helps us to provide a path for the subsequent steps

Approaching Retargetable Static, Dynamic, and Hybrid Executable-Code Analysis

Program comprehension and reverse engineering are two large domains of computer science that have one common goal – analysis of existing programs and understanding their behaviour. In present, methods of source code analysis are well established and used in practice by software engineers. On the other hand, analysis of executable code is a more challenging task that is not fully covered by existing tools. Furthermore, methods of retargetable executable code analysis are rare because of their complexity. In this paper, we present a complex platform independent toolchain for executable-code analysis that supports both static and dynamic analysis. This toolchain, developed within the Lissom project, exploits several previously designed methods and it can be used for debugging user’s applications as well as malware analysis, etc. The main contribution of this paper is to interconnect the existing methods and illustrate their usage on the real world scenarios. Furthermore, we introduce a concept of a new retargetable method – the hybrid analysis. It can eliminate the shortcomings of the static and dynamic analysis in future

From Parallel Programs to Customized Parallel Processors

The need for fast time to market of new embedded processor-based designs calls for a rapid design methodology of the included processors. The call for such a methodology is even more emphasized in the context of so called soft cores targeted to reconfigurable fabrics where per-design processor customization is commonplace. The C language has been commonly used as an input to hardware/software co-design flows. However, as C is a sequential language, its potential to generate parallel operations to utilize naturally parallel hardware constructs is far from optimal, leading to a customized processor design space with limited parallel resource scalability. In contrast, when utilizing a parallel programming language as an input, a wider processor design space can be explored to produce customized processors with varying degrees of utilized parallelism. This Thesis proposes a novel Multicore Application-Specific Instruction Set Processor (MCASIP) co-design methodology that exploits parallel programming languages as the application input format. In the methodology, the designer can explicitly capture the parallelism of the algorithm and exploit specialized instructions using a parallel programming language in contrast to being on the mercy of the compiler or the hardware to extract the parallelism from a sequential input. The Thesis proposes a multicore processor template based on the Transport Triggered Architecture, compiler techniques involved in static parallelization of computation kernels with barriers and a datapath integrated hardware accelerator for low overhead software synchronization implementation. These contributions enable scaling the customized processors both at the instruction and task levels to efficiently exploit the parallelism in the input program up to the implementation constraints such as the memory bandwidth or the chip area. The different contributions are validated with case studies, comparisons and design examples