Flexible and Distributed Real-Time Control on a 4G Telecom MPSoC

International audienceApplications like 4G baseband modem require single-chip implementation to meet the integration and power consumption requirements. These applications demand a high computing performance with real-time constraints, low-power consumption and low cost. With the rapid evolution of telecom standards and the increasing demand for multi-standard products, the need for exible baseband solutions is growing. The concept of Multi-Processor System-on-Chip (MPSoC) is well adapted to enable hardware reuse between products and between multiple wireless standards in the same device. Based on the experience of two heterogeneous Software Defined Radio (SDR) telecom chipsets, this paper presents a distributed control architecture for the homoGENEous Processor arraY (GENEPY) platform for 4G applications. This MPSoC platform is built with telecom baseband processors interconnected with a Network-on-Chip. The control is performed by a MIPS processor embedded in each baseband processor. This control processor can locally reconfigure and schedule the applications with real-time telecom constraints

FPGA based technical solutions for high throughput data processing and encryption for 5G communication: A review

The field programmable gate array (FPGA) devices are ideal solutions for high-speed processing applications, given their flexibility, parallel processing capability, and power efficiency. In this review paper, at first, an overview of the key applications of FPGA-based platforms in 5G networks/systems is presented, exploiting the improved performances offered by such devices. FPGA-based implementations of cloud radio access network (C-RAN) accelerators, network function virtualization (NFV)-based network slicers, cognitive radio systems, and multiple input multiple output (MIMO) channel characterizers are the main considered applications that can benefit from the high processing rate, power efficiency and flexibility of FPGAs. Furthermore, the implementations of encryption/decryption algorithms by employing the Xilinx Zynq Ultrascale+MPSoC ZCU102 FPGA platform are discussed, and then we introduce our high-speed and lightweight implementation of the well-known AES-128 algorithm, developed on the same FPGA platform, and comparing it with similar solutions already published in the literature. The comparison results indicate that our AES-128 implementation enables efficient hardware usage for a given data-rate (up to 28.16 Gbit/s), resulting in higher efficiency (8.64 Mbps/slice) than other considered solutions. Finally, the applications of the ZCU102 platform for high-speed processing are explored, such as image and signal processing, visual recognition, and hardware resource management

Heterogeneous vs Homogeneous MPSoC Approaches for a Mobile LTE Modem

International audienceApplications like 4G baseband modem require single-chip implementation to meet the integration and power consumption requirements. These applications demand a high computing performance with real-time constraints, low-power consumption and low cost. With the rapid evolution of tele- com standards and the increasing demand for multi-standard products, the need for flexible baseband solutions is growing. The concept of Multi-Processor System-on-Chip (MPSoC) is well adapted to enable hardware reuse between products and between multiple wireless standards in the same device. Heterogeneous architectures are well known solutions but they have limited flexibility. Based on the experience of two heterogeneous Software De- fined Radio (SDR) telecom chipsets, this paper presents the homoGENEous Processor arraY (GENEPY) platform for 4G ap- plications. This platform is built with SMEP units interconnected with a Network-on-Chip. The SMEP, implemented in 65nm low- power CMOS, can perform 3.2 GMAC/s with 77 GBits/s internal bandwidth at 400MHz. Two implementations of homogeneous GENEPY are compared to the heterogeneous MAGALI platform in terms of silicon area, performance and power consumption. Results show that a homogeneous approach can be more efficient and flexible than a heterogeneous approach in the context of 4G Mobile Terminals

HW/SW Co-Design Framework für Hochgeschwindigkeits-OFDM Signalverarbeitung

Im Rahmen dieser Arbeit wurde ein HW/SW Co-Design Framework zur Erstellung angepasster Multiprozessor System-on-Chips entwickelt, womit sich für moderne OFDM-Systeme neue Kompromisse zwischen Leistungsfähigkeit und Flexibilität erzielen lassen. Anhand unterschiedlicher Experimente zur Hochgeschwindigkeits-OFDM Übertragung wurde die Funktionalität der Systeme nachgewiesen sowie Datenraten im Gb/s-Bereich erzielt, was bisher lediglich unflexiblen, dedizierten Schaltkreisen vorbehalten war

Partially reconfigurable SDR solution on FPGA

Abstract. Software-defined radios (SDR) have become more common in order to answer the increasing complexity of wireless communication standards. The flexibility offered by SDR technology in return makes it possible to create and implement even more complex standards so there exists a mutual evolution cycle. One of the technological opportunities pursued on SDR is changing the waveforms on the fly. The standards challenge the SDR development. Computing throughput needs to be high enough, the end product has to be energy efficient, and all of this must be accomplished as cheaply as possible. SDRs have a wide range of implementation opportunities from complete software designs to more hardware oriented with higher level software control. The extreme ends of these approaches suffer from energy dissipation and design cost issues, respectively. The compromises include application specific architectures and reconfigurable hardware. Solutions vary from software to hardware between cases and depending on the needs. This thesis concentrates on investigating partial reconfigurability on a field-programmable gate array (FPGA) in an SDR application. Based on the results, partial reconfigurability is an attractive mean to bolster SDR functionalities. Although the energy efficiency of the employed FPGA solution is inferior to using an application-specific integrated circuit (ASIC), the flexibility and cost of design set them apart. This study focuses on partial reconfiguration on Xilinx FPGA devices but it may show benefits for other devices that can utilize partial reconfiguration on their designs.Osittain uudelleenohjelmoitava ohjelmistoradio FPGA-piirillä. Tiivistelmä. Ohjelmistoradiot ovat yleistyneet entistä kehittyneempien langattomien kommunikointimenetelmien myötä ja tarpeesta vastata näiden vaatimuksiin. Samalla ohjelmistoradioiden joustavuus mahdollistaa uusien ja kompleksisempien standardien kehittämisen. Tätä voi pitää molemminpuolisena kehityssyklinä. Aaltomuotojen nopea vaihtaminen lennosta ohjelmistoradion ollessa käytössä on yksi kehityksen alla oleva teknologia. Kommunikointistandardit haastavat ohjelmistoradioiden kehityksen erilaisilla vaatimuksillaan. Esimerkiksi laskentatehon tulee olla korkea, lopputuotteen energiatehokas ja tämän tulee tapahtua mahdollisimman edullisesti. Ohjelmistoradioiden toteutukset vaihtelevat aina vahvoista ohjelmistopohjaisista arkkitehtuureista enemmän laitteistoon tukeutuviin versioihin. Ääripäissä tässä spektrissä ohjelmistoihin perustuvat toteutukset eivät ole riittävän energiatehokkaita ja laitteistoratkaisujen hinnat nousevat helposti korkealle. Keskitien ratkaisuja ovat sovelluskohtaiset arkkitehtuurit ja uudelleen ohjelmoitavat laitteistot. Implementaatiot vaihtelevat ohjelmisto-laitteisto skaalalla riippuen tarpeesta ja tilanteesta. Tämä opinnäytetyö keskittyy tutkimaan osittaista uudelleenohjelmoimista FPGA-piireillä ohjelmistoradion yhteydessä. Tulosten perusteella osittainen uudelleen ohjelmointi on houkutteleva tapa tehostaa ohjelmistoradioita. Vaikka FPGA-piirien energiatehokkuus ei ole yhtä hyvä kuin ASIC-toteutusten, niiden joustavuus ja suunnittelukustannukset ovat paremmat. Vaikka tämä työ keskittyy osittaiseen uudelleenohjelmointiin Xilinxin FPGA-piireillä, voi siitä olla hyötyä muissa tutkimuksissa ja laitteissa

Green radios systems

Essential overview of GRS implementation scenarios. The needs of GRS and some concrete cases exampleope

Towards Viable Large Scale Heterogeneous Wireless Networks

We explore radio resource allocation and management issues related to a large-scale heterogeneous (hetnet) wireless system made up of several Radio Access Technologies (RATs) that collectively provide a unified wireless network to a diverse set of users through co-ordination managed by a centralized Global Resource Controller (GRC). We incorporate 3G cellular technologies HSPA and EVDO, 4G cellular technologies WiMAX and LTE, and WLAN technology Wi-Fi as the RATs in our hetnet wireless system. We assume that the user devices are either multi-modal or have one or more reconfigurable radios which makes it possible for each device to use any available RAT at any given time subject to resource-sharing agreements. For such a hetnet system where resource allocation is coordinated at a global level, characterizing the network performance in terms of various conflicting network efficiency objectives that takes costs associated with a network re-association operation into account largely remains an open problem. Also, all the studies to-date that try to characterize the network performance of a hetnet system do not account for RAT-specific implementation details and the management overhead associated with setting up a centralized control. We study the radio resource allocation problem and the implementation/management overhead issues associated with a hetnet system in two research phases. In the first phase, we develop cost models associated with network re-association in terms of increased power consumption and communication downtime taking into account various user device assumptions. Using these cost models in our problem formulations, the first phase focuses on resource allocation strategies where we use a high-level system modeling approach to study the achievable performance in terms of conflicting network efficiency measures of spectral efficiency, overall power consumption, and instantaneous and long-term fairness for each user in the hetnet system. Our main result from this phase of study suggests that the gain in spectral efficiency due to multi-access network diversity results in a tremendous increase in overall power consumption due to frequent re-associations required by user devices. We then develop a utility function-based optimization algorithm to characterize and achieve a desired tradeoff in terms of all four network efficiency measures of spectral efficiency, overall power consumption and instantaneous and long-term fairness. We show an increase in a multi-attribute system utility measure of up to 56.7% for our algorithm compared to other widely studied resource allocation algorithms including max-sum rate, proportional fairness, max-min fairness and min power. The second phase of our research study focuses on practical implementation issues including the overhead required to implement a centralized GRC solution in a hetnet system. Through detailed protocol level simulations performed in ns-2, we show an increase in spectral efficiency of up to 99% and an increase in instantaneous fairness of up to 28.5% for two sort-based user device-to-Access Point (AP)/Base Station (BS) association algorithms implemented at the GRC that aim to maximize system spectral efficiency and instantaneous fairness performance metrics respectively compared to a distributed solution where each user makes his/her own association decision. The efficiency increase for each respective attribute again results in a tremendous increase in power consumption of up to 650% and 794% for each respective algorithm implemented at the GRC compared to a distributed solution because of frequent re-associations

Algorithm-Architecture Co-Design for Digital Front-Ends in Mobile Receivers

The methodology behind this work has been to use the concept of algorithm-hardware co-design to achieve efficient solutions related to the digital front-end in mobile receivers. It has been shown that, by looking at algorithms and hardware architectures together, more efficient solutions can be found; i.e., efficient with respect to some design measure. In this thesis the main focus have been placed on two such parameters; first reduced complexity algorithms to lower energy consumptions at limited performance degradation, secondly to handle the increasing number of wireless standards that preferably should run on the same hardware platform. To be able to perform this task it is crucial to understand both sides of the table, i.e., both algorithms and concepts for wireless communication as well as the implications arising on the hardware architecture. It is easier to handle the high complexity by separating those disciplines in a way of layered abstraction. However, this representation is imperfect, since many interconnected "details" belonging to different layers are lost in the attempt of handling the complexity. This results in poor implementations and the design of mobile terminals is no exception. Wireless communication standards are often designed based on mathematical algorithms with theoretical boundaries, with few considerations to actual implementation constraints such as, energy consumption, silicon area, etc. This thesis does not try to remove the layer abstraction model, given its undeniable advantages, but rather uses those cross-layer "details" that went missing during the abstraction. This is done in three manners: In the first part, the cross-layer optimization is carried out from the algorithm perspective. Important circuit design parameters, such as quantization are taken into consideration when designing the algorithm for OFDM symbol timing, CFO, and SNR estimation with a single bit, namely, the Sign-Bit. Proof-of-concept circuits were fabricated and showed high potential for low-end receivers. In the second part, the cross-layer optimization is accomplished from the opposite side, i.e., the hardware-architectural side. A SDR architecture is known for its flexibility and scalability over many applications. In this work a filtering application is mapped into software instructions in the SDR architecture in order to make filtering-specific modules redundant, and thus, save silicon area. In the third and last part, the optimization is done from an intermediate point within the algorithm-architecture spectrum. Here, a heterogeneous architecture with a combination of highly efficient and highly flexible modules is used to accomplish initial synchronization in at least two concurrent OFDM standards. A demonstrator was build capable of performing synchronization in any two standards, including LTE, WiFi, and DVB-H

Power and Energy Aware Heterogeneous Computing Platform

During the last decade, wireless technologies have experienced significant development, most notably in the form of mobile cellular radio evolution from GSM to UMTS/HSPA and thereon to Long-Term Evolution (LTE) for increasing the capacity and speed of wireless data networks. Considering the real-time constraints of the new wireless standards and their demands for parallel processing, reconfigurable architectures and in particular, multicore platforms are part of the most successful platforms due to providing high computational parallelism and throughput. In addition to that, by moving toward Internet-of-Things (IoT), the number of wireless sensors and IP-based high throughput network routers is growing at a rapid pace. Despite all the progression in IoT, due to power and energy consumption, a single chip platform for providing multiple communication standards and a large processing bandwidth is still missing.The strong demand for performing different sets of operations by the embedded systems and increasing the computational performance has led to the use of heterogeneous multicore architectures with the help of accelerators for computationally-intensive data-parallel tasks acting as coprocessors. Currently, highly heterogeneous systems are the most power-area efficient solution for performing complex signal processing systems. Additionally, the importance of IoT has increased significantly the need for heterogeneous and reconfigurable platforms.On the other hand, subsequent to the breakdown of the Dennardian scaling and due to the enormous heat dissipation, the performance of a single chip was obstructed by the utilization wall since all cores cannot be clocked at their maximum operating frequency. Therefore, a thermal melt-down might be happened as a result of high instantaneous power dissipation. In this context, a large fraction of the chip, which is switched-off (Dark) or operated at a very low frequency (Dim) is called Dark Silicon. The Dark Silicon issue is a constraint for the performance of computers, especially when the up-coming IoT scenario will demand a very high performance level with high energy efficiency. Among the suggested solution to combat the problem of Dark-Silicon, the use of application-specific accelerators and in particular Coarse-Grained Reconfigurable Arrays (CGRAs) are the main motivation of this thesis work.This thesis deals with design and implementation of Software Defined Radio (SDR) as well as High Efficiency Video Coding (HEVC) application-specific accelerators for computationally intensive kernels and data-parallel tasks. One of the most important data transmission schemes in SDR due to its ability of providing high data rates is Orthogonal Frequency Division Multiplexing (OFDM). This research work focuses on the evaluation of Heterogeneous Accelerator-Rich Platform (HARP) by implementing OFDM receiver blocks as designs for proof-of-concept. The HARP template allows the designer to instantiate a heterogeneous reconfigurable platform with a very large amount of custom-tailored computational resources while delivering a high performance in terms of many high-level metrics. The availability of this platform lays an excellent foundation to investigate techniques and methods to replace the Dark or Dim part of chip with high-performance silicon dissipating very low power and energy. Furthermore, this research work is also addressing the power and energy issues of the embedded computing systems by tailoring the HARP for self-aware and energy-aware computing models. In this context, the instantaneous power dissipation and therefore the heat dissipation of HARP are mitigated on FPGA/ASIC by using Dynamic Voltage and Frequency Scaling (DVFS) to minimize the dark/dim part of the chip. Upgraded HARP for self-aware and energy-aware computing can be utilized as an energy-efficient general-purpose transceiver platform that is cognitive to many radio standards and can provide high throughput while consuming as little energy as possible. The evaluation of HARP has shown promising results, which makes it a suitable platform for avoiding Dark Silicon in embedded computing platforms and also for diverse needs of IoT communications.In this thesis, the author designed the blocks of OFDM receiver by crafting templatebased CGRA devices and then attached them to HARP’s Network-on-Chip (NoC) nodes. The performance of application-specific accelerators generated from templatebased CGRAs, the performance of the entire platform subsequent to integrating the CGRA nodes on HARP and the NoC traffic are recorded in terms of several highlevel performance metrics. In evaluating HARP on FPGA prototype, it delivers a performance of 0.012 GOPS/mW. Because of the scalability and regularity in HARP, the author considered its value as architectural constant. In addition to showing the gain and the benefits of maximizing the number of reconfigurable processing resources on a platform in comparison to the scaled performance of several state-of-the-art platforms, HARP’s architectural constant ensures application-independent figure of merit. HARP is further evaluated by implementing various sizes of Discrete Cosine transform (DCT) and Discrete Sine Transform (DST) dedicated for HEVC standard, which showed its ability to sustain Full HD 1080p format at 30 fps on FPGA. The author also integrated self-aware computing model in HARP to mitigate the power dissipation of an OFDM receiver. In the case of FPGA implementation, the total power dissipation of the platform showed 16.8% reduction due to employing the Feedback Control System (FCS) technique with Dynamic Frequency Scaling (DFS). Furthermore, by moving to ASIC technology and scaling both frequency and voltage simultaneously, significant dynamic power reduction (up to 82.98%) was achieved, which proved the DFS/DVFS techniques as one step forward to mitigate the Dark Silicon issue