Field Programmable Gate Arrays (FPGAs) II

This Edited Volume Field Programmable Gate Arrays (FPGAs) II is a collection of reviewed and relevant research chapters, offering a comprehensive overview of recent developments in the field of Computer and Information Science. The book comprises single chapters authored by various researchers and edited by an expert active in the Computer and Information Science research area. All chapters are complete in itself but united under a common research study topic. This publication aims at providing a thorough overview of the latest research efforts by international authors on Computer and Information Science, and open new possible research paths for further novel developments

Software Defined Radio Localization using 802.11-style Communications

This major qualifying project implements a simple indoor localization system using software defined radio. Both time of arrival and received signal strength methods are used by an array of wireless receivers to trilaterate a cooperative transmitter. The implemented system builds upon an IEEE 802.11b-like communications platform implemented in GNU Radio. Our results indicate substantial room for improvement, particularly in the acquisition of time data. This project contributes a starting point for ongoing research in indoor localization, both through our literature review and system implementation

Real-Time Passive Acoustic Tracking of Underwater Vehicles

Com o crescente interesse na exploração oceânica, sistemas de localização subaquática têm sido largamente usados pela industria e comunidade cientifica. Neste trabalho foi desenvolvido um sistema de localização acústica passiva em tempo real, com uma topologia idêntica ao do ultra-short baseline. Este sistema calcula a posição a duas dimensões de uma fonte acústica submersa conhecida, com base na integração de medições da direção do som ao longo do tempo. O ângulo de chegada da onda sonora é estimado pelo atraso de fase entre os sinais adquiridos por dois hidrofones colocados perto um do outro. Esta configuração permite atenuar as diferenças nos sinais recebidos devidas a perturbações do canal acústico subaquático. Este algoritmo foi implementado em tempo real numa plataforma SoC reconfigurável (CPU ARM + FPGA), e validado com ensaios de campo realizados no mar

DIEstro: Motion sensor platform for cattle oestrus detection

The reproductive efficiency of dairy industry has decreased over the last ten years due mainly to an intensification of the management techniques of the herd, and an increase of total number of animals. A main objective of worldwide dairy farms is to ensure that dairy cows, produce as much milk as possible. A cow produces milk while it has a calf to breastfeed, therefore, the less time passes between births, the more ”productive” the cows are. This is the principal reason why the precise heat (oestrus) detection has became so important, a task traditionally assigned to veterinary and expert people examining and watching the cattle behavior, and in recent years to electronic devices monitoring the cow’s physical activity. Tracking the animal’s physical activity by means of a portable device strapped to each animal, is known to be a very effective way to determine heat, but sometimes requires expensive hardware and large batteries. In this work, a low-cost micropower wireless system able to automatically detect oestrus period of cattle is presented. It was designed in cooperation with BQN, a company developing technology for the agribusiness industry in Uruguay. The tracker seizes the recent availability of 1 uA micropower accelerometers, LoRa long range transceivers, and FRAM microcontrollers, to achieve a coin cell battery powered paradigm for oestrus detection. The device records 3 axis acceleration information, process it, and periodically sends it to a server; it has a measured ultra low power consumption of 4 uA while collecting/processing data, reaching a very large (> 10km) communication distance using a star topology and LoRa technology at countryside areas. The scope of the project and this documentation is the entire hardware and firmware development, from the start idea, design and final implementation.Agencia Nacional de Investigación e Innovació

Performance assessment for mountain bike based on WSN and Cloud Technologies

The mountain bike is one of the most used equipment’s in outdoor sports activities. The thesis describes the design and all development and implementation of Performance Assessment for Mountain Bike based on Wireless Sensor Network (WSN) and Cloud Technologies. The work presents a distributed sensing system for cycling assessment-providing data for objective evaluation of the athlete performance during training. Thus a wireless sensor network attached to the sport equipment provides to the athlete and the coach with performance values during practice. The sensors placed in biker equipment’s behave as nodes of a WSN. This is possible with the developing of IoT-based systems in sports, the tracking and monitoring of athletes in their activities has an important role on his formation as bikers and helps to increase performance, through the analyze of each session. The implemented system performs acquisition, processing and transmission, of data using a ZigBee wireless networks that provide also machine-to-machine communication and data storage in a server located in the cloud. As in many cycling applications use the phone as a module to get the values, this work will be a little different making use of phone/tablet to consult information. The information stored on the cloud server is accessed through a mobile application that analyses and correlates all metrics calculated using the training data obtained during practice. Additional information regarding the health status may be also considered. Therefore, the system permits that athletes perform an unlimited number of trainings that can be accessed at any time through the mobile application by the bikers and coach. Based on capability of the system to save a history of the evolution of each athlete during training the system permits to perform appropriate comparisons between different training sessions and different athlete’s performances.A bicicleta de montanha é um dos equipamentos para desportos no exterior mais usada. A tese descreve todo o desenho, desenvolvimento e implementação de Performance Assessment for Mountain Bike based on WSN and Cloud Technologies. Este apresenta um sistema de deteção distribuída para o aumento do desempenho, melhorar a metodologia da prática do ciclismo e para formação de atletas. Para tal foi desenvolvida e anexada uma rede de sensores que está embutida no equipamento do ciclista, através desta rede de sensores sem fios são obtidos os valores respetivos à interação do utilizador e a sua bicicleta, sendo estes apresentados ao treinador e ao próprio ciclista. Os sensores colocados comportam-se como nós de uma rede de sensores sem fios. Isso é possível com o desenvolvimento de sistemas baseados na Internet das coisas no desporto, a observação da movimentação e monitoramento de atletas nas suas atividades tem um papel importante na sua formação como ciclistas e ajuda a aumentar o desempenho. O sistema é baseado numa rede ZigBee sem fios, que permite a comunicação máquina-para-máquina e o armazenamento de dados num servidor localizado na nuvem. Toda a informação na nuvem pode ser acedida através de uma aplicação mobile que analisa e correlaciona todos os valores calculados usando os dados recolhidos durante o treino efetuado por cada ciclista. Como em muitas aplicações de ciclismo estas usam o telefone como um módulo para obter os valores, neste trabalho o caso é diferente fazendo o uso do telefone/tablet para apenas consultar as informações. Alguma informação sobre o ciclista é fornecida para poder efetuar alguns cálculos, relativos à saúde do ciclista, neste caso toda a energia gasta na prática de um determinado treino. Toda esta informação pode ser acedida através de uma aplicação Android e por consequência num dispositivo Android. Com a aplicação desenvolvida é possível observar e processar toda a informação recolhida através dos sensores implementados, a observação dos dados recolhidos pode ser efetuada pelo treinador responsável, como pelo próprio atleta. Portanto, o sistema permite a realização de um ilimitado número de sessões de treino, estes podem ser consultados a qualquer momento através da aplicação móvel. Fazendo com que seja possível manter um histórico da evolução de cada atleta, podendo assim observar e comparar cada sessão de treino, realizada por cada atleta

System analysis and integration studies for a 15-micron horizon radiance measurement experiment

Systems analysis and integration studies for 15-micron horizon radiance measurement experimen

A Three – tier bio-implantable sensor monitoring and communications platform

One major hindrance to the advent of novel bio-implantable sensor technologies is the need for a reliable power source and data communications platform capable of continuously, remotely, and wirelessly monitoring deeply implantable biomedical devices. This research proposes the feasibility and potential of combining well established, ‘human-friendly' inductive and ultrasonic technologies to produce a proof-of-concept, generic, multi-tier power transfer and data communication platform suitable for low-power, periodically-activated implantable analogue bio-sensors. In the inductive sub-system presented, 5 W of power is transferred across a 10 mm gap between a single pair of 39 mm (primary) and 33 mm (secondary) circular printed spiral coils (PSCs). These are printed using an 8000 dpi resolution photoplotter and fabricated on PCB by wet-etching, to the maximum permissible density. Our ultrasonic sub-system, consisting of a single pair of Pz21 (transmitter) and Pz26 (receiver) piezoelectric PZT ceramic discs driven by low-frequency, radial/planar excitation (-31 mode), without acoustic matching layers, is also reported here for the first time. The discs are characterised by propagation tank test and directly driven by the inductively coupled power to deliver 29 μW to a receiver (implant) employing a low voltage start-up IC positioned 70 mm deep within a homogeneous liquid phantom. No batteries are used. The deep implant is thus intermittently powered every 800 ms to charge a capacitor which enables its microcontroller, operating with a 500 kHz clock, to transmit a single nibble (4 bits) of digitized sensed data over a period of ~18 ms from deep within the phantom, to the outside world. A power transfer efficiency of 83% using our prototype CMOS logic-gate IC driver is reported for the inductively coupled part of the system. Overall prototype system power consumption is 2.3 W with a total power transfer efficiency of 1% achieved across the tiers

Development of a Nanosatellite Software Defined Radio Communications System

Communications systems designed with application-specific integrated circuit (ASIC) technology suffer from one very significant disadvantage - the integrated circuits do not possess the ability of programmability. However, Software Defined Radio’s (SDR’s) integrated with Field Programmable Gate Arrays (FPGA) provide an opportunity to update the communication system on nanosatellites (which are physically difficult to access) due to their capability of performing signal processing in software. SDR signal processing is performed in software on reprogrammable elements such as FPGA’s. Applying this technique to nanosatellite communications systems will optimize the operations of the hardware, and increase the flexibility of the system. In this research a transceiver algorithm for a nanosatellite software defined radio communications is designed. The developed design is capable of modulation of data to transmit information and demodulation of data to receive information. The transceiver algorithm also works at different baud rates. The design implementation was successfully tested with FPGA-based hardware to demonstrate feasibility of the transceiver design with a hardware platform suitable for SDR implementation