A prototype controller for variable reluctance motors

A three-level cascade structure is proposed for the control of a variable reluctance (VR) motor. In order to deal with the highly nonlinear behavior of VR motors, the controlling system includes two variable-structure controllers for current and velocity loops as well as an intermediate torque-sharing compensator. The intermediate compensator has been designed by means of nonlinear optimization techniques in order to reduce the torque ripple and to get the maximum motor velocity. The proposed controller has been validated through extensive simulation experiments. The architecture of a prototype controller is presented and the actual performance measured on a VR motor is discussed in comparison with simulations. The results show practical feasibility and good performance of the proposed controller, which is also suitable for a very simple and quite inexpensive fully hardware implementatio

In-wheel axial-flux SRM drive for light electric vehicles

Revenues from global sales of light electric vehicles are expected to grow from $9.3 billion in 2017 to$ 23.9 billion in 2025. In order to boost this growth electric drives with better features and lower costs have to be developed. This paper presents a new in-wheel axial-flux switched reluctance motor with double rotor and a particular disposition of the stator and rotor poles that provides short flux path without flux reversal. The magnetic active parts of the stator and the rotor are built using soft magnetic composites. The motor is fed from batteries trough a on purpose designed electronic power controller. Simulation of the whole drive, using Matlab-Simulink coupled with the results of the three dimensional finite analysis of the motor is carried out. Simulation results prove that the proposed in-wheel axial-flux switched reluctance motor drive is adequate for the propulsion of electric light vehicles

Performance optimization in switched reluctance motor drives

In this paper, switched reluctance motors (SRM) are proposed as an alternative for electric power assisted steering (EPAS) applications. A prototype machine has been developed as very attractive design for a steering electric motor, both from a cost and size perspective. A fourphase 8/6 SRM drive is designed for a rack type EPAS which should provide a maximum force of 10 kN. Two-dimension finite element analysis is used to validate the design

Direct Flux Field Oriented Control of IPM Drives with Variable DC-Link in the Field-Weakening Region

This paper presents the direct flux control of an interior permanent-magnet (IPM) motor drive in the field-weakening region. The output torque is regulated by the coordinated control of the stator flux amplitude and the current component in quadrature with the flux, and it is implemented in the stator flux reference frame. The control system guarantees maximum torque production taking into account voltage and current limits, in particular in case of large dc-link variations. The field-oriented control does not necessarily require an accurate magnetic model of the IPM motor, and it is able to exploit the full inverter voltage at different dc-link levels with no additional voltage control loop. The feasibility of the proposed control method is investigated in discrete-time simulation, then tested on a laboratory rig, and finally implemented on board of an electric scooter prototype. The motor under test is an IPM permanent-magnet-assisted synchronous reluctance machine, with high-saliency and limited permanent-magnet flu

Sensored and sensorless speed control methods for brushless doubly fed reluctance motors

The study considers aspects of scalar V/f control, vector control and direct torque (and flux) control (DTC) of the brushless doubly fed reluctance machine (BDFRM) as a promising cost-effective alternative to the existing technological solutions for applications with restricted variable speed capability such as large pumps and wind turbine generators. Apart from providing a comprehensive literature review and analysis of these control methods, the development and results of experimental verification, of an angular velocity observerbased DTC scheme for sensorless speed control of the BDFRM which, unlike most of the other DTC-concept applications, can perform well down to zero supply frequency of the inverter-fed winding, have also been presented in the study

Unified Direct-Flux Vector Control for AC Motor Drives

The paper introduces a Unified Direct-Flux Vector Control scheme suitable for sinusoidal AC motor drives. The AC drives considered here are Induction Motor, Synchronous Reluctance and synchronous Permanent Magnet motor drives, including Interior and Surface-mounted Permanent Magnet types. The proposed controller operates in stator flux coordinates: the stator flux amplitude is directly controlled by the direct voltage component, while the torque is controlled by regulating the quadrature current component. The unified direct-flux control is particularly convenient when flux-weakening is required, since it easily guarantees maximum torque production under current and voltage limitations. The hardware for control is standard and the control firmware is the same for all the motors under test with the only exception of the magnetic model used for flux estimation at low speed. Experimental results on four different drives are provided, showing the validity of the proposed unified control approac

Design and Development of Low Torque Ripple Variable-Speed Drive System With Six-Phase Switched Reluctance Motors

Switched reluctance motor (SRM) drives conventionally use current control techniques at low speed and voltage control techniques at high speed. However, these conventional methods usually fail to restrain the torque ripple, which is normally associated with this type of machine. Compared with conventional three-phase SRMs, higher phase SRMs have the advantage of lower torque ripple: To further reduce their torque ripple, this paper presents a control method for torque ripple reduction in six-phase SRM drives. A constant instantaneous torque is obtained by regulating the rotational speed of the stator flux linkage. This torque control method is subsequently developed for a conventional converter and a proposed novel converter with fewer switching devices. Moreover, modeling and simulation of this six-phase SRM drive system has been conducted in detail and validated experimentally using a 4.0-kW six-phase SRM drive system. Test results demonstrate that the proposed torque control method has outstanding performance of restraining the torque ripple with both converters for the six-phase SRM, showing superior performance to the conventional control techniques

Torque control strategy for an axial flux switched reluctance machine

This paper reflects the work done to design a torque control strategy for an axial flux switched reluctance machine. The general electrical model is first presented but as the switched reluctance machine behaves nonlinearly1 a (three-dimensional) finite element method characterization is performed, so the nonlinearity may be considered. Once the machine is characterized in FEM a Simulink model is developed where a torque control strategy is proposed. Then, both the machine and the control are experimentally tested. The control setting, and the obtained real performance results are also presented in this document. Finally, the most outstanding conclusions about the control strategy are captured. Main difficulties encountered during the implementation of the control strategy are also collected