11,788 research outputs found
A Robust Zero-Calibration RF-based Localization System for Realistic Environments
Due to the noisy indoor radio propagation channel, Radio Frequency (RF)-based
location determination systems usually require a tedious calibration phase to
construct an RF fingerprint of the area of interest. This fingerprint varies
with the used mobile device, changes of the transmit power of smart access
points (APs), and dynamic changes in the environment; requiring re-calibration
of the area of interest; which reduces the technology ease of use. In this
paper, we present IncVoronoi: a novel system that can provide zero-calibration
accurate RF-based indoor localization that works in realistic environments. The
basic idea is that the relative relation between the received signal strength
from two APs at a certain location reflects the relative distance from this
location to the respective APs. Building on this, IncVoronoi incrementally
reduces the user ambiguity region based on refining the Voronoi tessellation of
the area of interest. IncVoronoi also includes a number of modules to
efficiently run in realtime as well as to handle practical deployment issues
including the noisy wireless environment, obstacles in the environment,
heterogeneous devices hardware, and smart APs. We have deployed IncVoronoi on
different Android phones using the iBeacons technology in a university campus.
Evaluation of IncVoronoi with a side-by-side comparison with traditional
fingerprinting techniques shows that it can achieve a consistent median
accuracy of 2.8m under different scenarios with a low beacon density of one
beacon every 44m2. Compared to fingerprinting techniques, whose accuracy
degrades by at least 156%, this accuracy comes with no training overhead and is
robust to the different user devices, different transmit powers, and over
temporal changes in the environment. This highlights the promise of IncVoronoi
as a next generation indoor localization system.Comment: 9 pages, 13 figures, published in SECON 201
Cooperative Relative Positioning of Mobile Users by Fusing IMU Inertial and UWB Ranging Information
Relative positioning between multiple mobile users is essential for many
applications, such as search and rescue in disaster areas or human social
interaction. Inertial-measurement unit (IMU) is promising to determine the
change of position over short periods of time, but it is very sensitive to
error accumulation over long term run. By equipping the mobile users with
ranging unit, e.g. ultra-wideband (UWB), it is possible to achieve accurate
relative positioning by trilateration-based approaches. As compared to vision
or laser-based sensors, the UWB does not need to be with in line-of-sight and
provides accurate distance estimation. However, UWB does not provide any
bearing information and the communication range is limited, thus UWB alone
cannot determine the user location without any ambiguity. In this paper, we
propose an approach to combine IMU inertial and UWB ranging measurement for
relative positioning between multiple mobile users without the knowledge of the
infrastructure. We incorporate the UWB and the IMU measurement into a
probabilistic-based framework, which allows to cooperatively position a group
of mobile users and recover from positioning failures. We have conducted
extensive experiments to demonstrate the benefits of incorporating IMU inertial
and UWB ranging measurements.Comment: accepted by ICRA 201
RF Localization in Indoor Environment
In this paper indoor localization system based on the RF power measurements of the Received Signal Strength (RSS) in WLAN environment is presented. Today, the most viable solution for localization is the RSS fingerprinting based approach, where in order to establish a relationship between RSS values and location, different machine learning approaches are used. The advantage of this approach based on WLAN technology is that it does not need new infrastructure (it reuses already and widely deployed equipment), and the RSS measurement is part of the normal operating mode of wireless equipment. We derive the Cramer-Rao Lower Bound (CRLB) of localization accuracy for RSS measurements. In analysis of the bound we give insight in localization performance and deployment issues of a localization system, which could help designing an efficient localization system. To compare different machine learning approaches we developed a localization system based on an artificial neural network, k-nearest neighbors, probabilistic method based on the Gaussian kernel and the histogram method. We tested the developed system in real world WLAN indoor environment, where realistic RSS measurements were collected. Experimental comparison of the results has been investigated and average location estimation error of around 2 meters was obtained
LIS: Localization based on an intelligent distributed fuzzy system applied to a WSN
The localization of the sensor nodes is a fundamental problem in wireless sensor networks.
There are a lot of different kinds of solutions in the literature. Some of them use external
devices like GPS, while others use special hardware or implicit parameters in wireless
communications.
In applications like wildlife localization in a natural environment, where the power available
and the weight are big restrictions, the use of hungry energy devices like GPS or hardware
that add extra weight like mobile directional antenna is not a good solution.
Due to these reasons it would be better to use the localization’s implicit characteristics in
communications, such as connectivity, number of hops or RSSI. The measurement related
to these parameters are currently integrated in most radio devices. These measurement
techniques are based on the beacons’ transmissions between the devices.
In the current study, a novel tracking distributed method, called LIS, for localization of
the sensor nodes using moving devices in a network of static nodes, which have no additional
hardware requirements is proposed.
The position is obtained with the combination of two algorithms; one based on a local
node using a fuzzy system to obtain a partial solution and the other based on a centralized
method which merges all the partial solutions. The centralized algorithm is based on the
calculation of the centroid of the partial solutions.
Advantages of using fuzzy system versus the classical Centroid Localization (CL)
algorithm without fuzzy preprocessing are compared with an ad hoc simulator made for
testing localization algorithms.
With this simulator, it is demonstrated that the proposed method obtains less localization
errors and better accuracy than the centroid algorithm.Junta de Andalucía P07-TIC-0247
Simultaneous Distributed Sensor Self-Localization and Target Tracking Using Belief Propagation and Likelihood Consensus
We introduce the framework of cooperative simultaneous localization and
tracking (CoSLAT), which provides a consistent combination of cooperative
self-localization (CSL) and distributed target tracking (DTT) in sensor
networks without a fusion center. CoSLAT extends simultaneous localization and
tracking (SLAT) in that it uses also intersensor measurements. Starting from a
factor graph formulation of the CoSLAT problem, we develop a particle-based,
distributed message passing algorithm for CoSLAT that combines nonparametric
belief propagation with the likelihood consensus scheme. The proposed CoSLAT
algorithm improves on state-of-the-art CSL and DTT algorithms by exchanging
probabilistic information between CSL and DTT. Simulation results demonstrate
substantial improvements in both self-localization and tracking performance.Comment: 10 pages, 5 figure
- …