Nonlinear model predictive growth control of a class of plant-inspired soft growing robots

Recently, researchers have shown an increased interest in considering plants as a model of inspiration for designing new robot locomotions. Growing robots, that imitate the biological growth presented by plants, have proved irresistible in unpredictable and distal environments due to their morphological adaptation and tip-extension capabilities. However, as a result of the irreversible growing process exhibited by growing robots, classical control schemes could fail in obtaining feasible solutions that respect the permanent growth constraint. Thus, in this article, a Nonlinear Model Predictive Control (NMPC) scheme is proposed to guarantee the robot’s performance towards point stabilization while respecting the constraints imposed by the growing process and the control limits. The proposed NMPC-based growth control has applied to the kinematic model of the recently proposed plant-inspired robots in the literature, namely, vine-like growing robots. Numerical simulations have been performed to show the effectiveness of the proposed NMPC-based growth control in terms of point stabilization, disturbance rejection, and obstacle avoidance and encouraging results were obtained. Finally, the robustness of the proposed NMPC-based growth control is analyzed against various input disturbances using Monte-Carlo simulations that could guide the tuning process of the NMPC

On Neuromechanical Approaches for the Study of Biological Grasp and Manipulation

Biological and robotic grasp and manipulation are undeniably similar at the level of mechanical task performance. However, their underlying fundamental biological vs. engineering mechanisms are, by definition, dramatically different and can even be antithetical. Even our approach to each is diametrically opposite: inductive science for the study of biological systems vs. engineering synthesis for the design and construction of robotic systems. The past 20 years have seen several conceptual advances in both fields and the quest to unify them. Chief among them is the reluctant recognition that their underlying fundamental mechanisms may actually share limited common ground, while exhibiting many fundamental differences. This recognition is particularly liberating because it allows us to resolve and move beyond multiple paradoxes and contradictions that arose from the initial reasonable assumption of a large common ground. Here, we begin by introducing the perspective of neuromechanics, which emphasizes that real-world behavior emerges from the intimate interactions among the physical structure of the system, the mechanical requirements of a task, the feasible neural control actions to produce it, and the ability of the neuromuscular system to adapt through interactions with the environment. This allows us to articulate a succinct overview of a few salient conceptual paradoxes and contradictions regarding under-determined vs. over-determined mechanics, under- vs. over-actuated control, prescribed vs. emergent function, learning vs. implementation vs. adaptation, prescriptive vs. descriptive synergies, and optimal vs. habitual performance. We conclude by presenting open questions and suggesting directions for future research. We hope this frank assessment of the state-of-the-art will encourage and guide these communities to continue to interact and make progress in these important areas

To Enabling Plant-like Movement Capabilities in Continuum Arms

Enabling reaching capabilities in highly redundant continuum soft arms is an active area of research. So far, it has been heavily addressed through the brain-inspired notion of internal models, where sensory-motor spaces are correlated through learning-based computational frameworks. However, this work investigates an innovative source of bio-inspiration, i.e., plants, which can interestingly move towards a desired external stimulus despite the lack of a central nervous system, thereby, opening avenues to the development of a new generation of distributed control strategies for continuum arms. In particular, reaching is achieved through a combination of distributed sensing and curvature regulation. This work is a first translation of moving-by-growing mechanisms in plants intended to endow continuum and soft robotic arms with a novel repertoire of motions that can be exploited to efficiently navigate highly unstructured environments

Novel Vine-like Continuum Robot for Environmental Exploration Applications

This thesis details a new design and novel operational strategies for nature inspired, thin tendril continuum robots. Instead of taking inspiration for robot design from insects or animals, the novel approach to continuum robotics herein takes inspiration and adapts operational concepts from plant life. In particular, an innovative strategy is developed which mimics behaviors observed in vines and other climbing plants. Specifically, a tendril robot with prickles was developed and deployed to actively seek environmental contact, exploiting the mechanical advantage gained by bracing against the environment using the prickles. The resulting performance enhancements over previously developed smooth backbone tendril robot designs, and use of strategies that do not attempt to interact with the environment are empirically demonstrated with the new robot prototype. Results of further experiments suggest applications in which the new design and approach could prove useful to the scientific and wider communities

The Penn Jerboa: A Platform for Exploring Parallel Composition of Templates

We have built a 12DOF, passive-compliant legged, tailed biped actuated by four brushless DC motors. We anticipate that this machine will achieve varied modes of quasistatic and dynamic balance, enabling a broad range of locomotion tasks including sitting, standing, walking, hopping, running, turning, leaping, and more. Achieving this diversity of behavior with a single under-actuated body, requires a correspondingly diverse array of controllers, motivating our interest in compositional techniques that promote mixing and reuse of a relatively few base constituents to achieve a combinatorially growing array of available choices. Here we report on the development of one important example of such a behavioral programming method, the construction of a novel monopedal sagittal plane hopping gait through parallel composition of four decoupled 1DOF base controllers. For this example behavior, the legs are locked in phase and the body is fastened to a boom to restrict motion to the sagittal plane. The platform's locomotion is powered by the hip motor that adjusts leg touchdown angle in flight and balance in stance, along with a tail motor that adjusts body shape in flight and drives energy into the passive leg shank spring during stance. The motor control signals arise from the application in parallel of four simple, completely decoupled 1DOF feedback laws that provably stabilize in isolation four corresponding 1DOF abstract reference plants. Each of these abstract 1DOF closed loop dynamics represents some simple but crucial specific component of the locomotion task at hand. We present a partial proof of correctness for this parallel composition of template reference systems along with data from the physical platform suggesting these templates are anchored as evidenced by the correspondence of their characteristic motions with a suitably transformed image of traces from the physical platform.Comment: Technical Report to Accompany: A. De and D. Koditschek, "Parallel composition of templates for tail-energized planar hopping," in 2015 IEEE International Conference on Robotics and Automation (ICRA), May 2015. v2: Used plain latex article, correct gap radius and specific force/torque number

Industrial, Collaborative and Mobile Robotics in Latin America: Review of Mechatronic Technologies for Advanced Automation

Mechatronics and Robotics (MaR) have recently gained importance in product development and manufacturing settings and applications. Therefore, the Center for Space Emerging Technologies (C-SET) has managed an international multi-disciplinary study to present, historically, the first Latin American general review of industrial, collaborative, and mobile robotics, with the support of North American and European researchers and institutions. The methodology is developed by considering literature extracted from Scopus, Web of Science, and Aerospace Research Central and adding reports written by companies and government organizations. This describes the state-of-the-art of MaR until the year 2023 in the 3 Sub-Regions: North America, Central America, and South America, having achieved important results related to the academy, industry, government, and entrepreneurship; thus, the statistics shown in this manuscript are unique. Also, this article explores the potential for further work and advantages described by robotic companies such as ABB, KUKA, and Mecademic and the use of the Robot Operating System (ROS) in order to promote research, development, and innovation. In addition, the integration with industry 4.0 and digital manufacturing, architecture and construction, aerospace, smart agriculture, artificial intelligence, and computational social science (human-robot interaction) is analyzed to show the promising features of these growing tech areas, considering the improvements to increase production, manufacturing, and education in the Region. Finally, regarding the information presented, Latin America is considered an important location for investments to increase production and product development, taking into account the further proposal for the creation of the LATAM Consortium for Advanced Robotics and Mechatronics, which could support and work on roboethics and education/R+D+I law and regulations in the Region. Doi: 10.28991/ESJ-2023-07-04-025 Full Text: PD

Observer-based Control of Inflatable Robot with Variable Stiffness

In the last decade, soft robots have been at the forefront of a robotic revolution. Due to the flexibility of the soft materials employed, soft robots are equipped with a capability to execute new tasks in new application areas -beyond what can be achieved using classical rigid-link robots. Despite these promising properties, many soft robots nowadays lack the capability to exert sufficient force to perform various real-life tasks. This has led to the development of stiffness-controllable inflatable robots instilled with the ability to modify their stiffness during motion. This new capability, however, poses an even greater challenge for robot control. In this paper, we propose a model-based kinematic control strategy to guide the tip of an inflatable robot arm in its environment. The bending of the robot is modelled using an Euler-Bernoulli beam theory which takes into account the variation of the robot's structural stiffness. The parameters of the model are estimated online using an observer based on the Extended Kalman Filter (EKF). The parameters' estimates are used to approximate the Jacobian matrix online and used to control the robot's tip considering also variations in the robot's stiffness. Simulation results and experiments using a fabric-based planar 3-degree-of-freedom (DOF) inflatable manipulators demonstrate the promising performance of the proposed control algorithm

Proceedings of the 4th field robot event 2006, Stuttgart/Hohenheim, Germany, 23-24th June 2006

Zeer uitgebreid verslag van het 4e Fieldrobotevent, dat gehouden werd op 23 en 24 juni 2006 in Stuttgart/Hohenhei

An earthworm-like modular soft robot for locomotion in multi-terrain environments

Robotic locomotion in subterranean environments is still unsolved, and it requires innovative designs and strategies to overcome the challenges of burrowing and moving in unstructured conditions with high pressure and friction at depths of a few centimeters. Inspired by antagonistic muscle contractions and constant volume coelomic chambers observed in earthworms, we designed and developed a modular soft robot based on a peristaltic soft actuator (PSA). The PSA demonstrates two active configurations from a neutral state by switching the input source between positive and negative pressure. PSA generates a longitudinal force for axial penetration and a radial force for anchorage, through bidirectional deformation of the central bellows-like structure, which demonstrates its versatility and ease of control. The performance of PSA depends on the amount and type of fluid confined in an elastomer chamber, generating different forces and displacements. The assembled robot with five PSA modules enabled to perform peristaltic locomotion in different media. The role of friction was also investigated during experimental locomotion tests by attaching passive scales like earthworm setae to the ventral side of the robot. This study proposes a new method for developing a peristaltic earthworm-like soft robot and provides a better understanding of locomotion in different environments