Placement driven retiming with a coupled edge timing model

Retiming is a widely investigated technique for performance optimization. It performs powerful modifications on a circuit netlist. However, often it is not clear, whether the predicted performance improvement will still be valid after placement has been performed. This paper presents a new retiming algorithm using a highly accurate timing model taking into account the effect of retiming on capacitive loads of single wires as well as fanout systems. We propose the integration of retiming into a timing-driven standard cell placement environment based on simulated annealing. Retiming is used as an optimization technique throughout the whole placement process. The experimental results show the benefit of the proposed approach. In comparison with the conventional design flow based on standard FEAS our approach achieved an improvement in cycle time of up to 34% and 17% on the average

Placement for fast and reliable through-silicon-via (TSV) based 3D-IC layouts

The objective of this research is to explore the feasibility of addressing the major performance and reliability problems or issues, such as wirelength, stress-induced carrier mobility variation, temperature, and quality trade-offs, found in three-dimensional integrated circuits (3D ICs) that use through-silicon vias (TSVs) at placement stage. Four main works that support this goal are included. In the first work, wirelength of TSV-based 3D ICs is the main focus. In the second work, stress-induced carrier mobility variation in TSV-based 3D ICs is examined. In the third work, temperature inside TSV-based 3D ICs is investigated. In the final work, the quality trade-offs of TSV-based 3D-IC designs are explored. In the first work, a force-directed, 3D, and gate-level placement algorithm that efficiently handles TSVs is developed. The experiments based on synthesized benchmarks indicate that the developed algorithm helps generate GDSII layouts of 3D-IC designs that are optimized in terms of wirelength. In addition, the impact of TSVs on other physical aspects of 3D-IC designs is also studied by analyzing the GDSII layouts. In the second work, the model for carrier mobility variation caused by TSV and STI stresses is developed as well as the timing analysis flow considering the stresses. The impact of TSV and STI stresses on carrier mobility variation and performance of 3D ICs is studied. Furthermore, a TSV-stress-driven, force-directed, and 3D placement algorithm is developed. It exploits carrier mobility variation, caused by stress around TSVs after fabrication, to improve the timing and area objectives during placement. In addition, the impact of keep-out zone (KOZ) around TSVs on stress, carrier mobility variation, area, wirelength, and performance of 3D ICs is studied. In the third work, two temperature-aware global placement algorithms are developed. They exploit die-to-die thermal coupling in 3D ICs to improve temperature during placement. In addition, a framework used to evaluate the results from temperature-aware global placements is developed. The main component of the framework is a GDSII-level thermal analysis that considers all structures inside a TSV-based 3D IC while computing temperature. The developed placers are compared with several state-of-the-art placers published in recent literature. The experimental results indicate that the developed algorithms help improve the temperature of 3D ICs effectively. In the final work, three block-level design styles for TSV-based die-to-wafer bonded 3D ICs are discussed. Several 3D-IC layouts in the three styles are manually designed. The main difference among these layouts is the position of TSVs. Finally, the area, wirelength, timing, power, temperature, and mechanical stress of all layouts are compared to explore the trade-offs of layout quality.PhDCommittee Chair: Lim, Sung Kyu; Committee Member: Bakir, Muhannad; Committee Member: Kim, Hyesoon; Committee Member: Mukhopadhyay, Saibal; Committee Member: Swaminathan, Madhava

Nanometer VLSI placement and optimization for multi-objective design closure

In a VLSI physical synthesis flow, placement directly defines the interconnection, which affects many other design objectives, such as timing, power consumption, congestion, and thermal issues. With the scaling of technology, the relative interconnect delay increases dramatically. As a result, placement has become a bottleneck in deep sub-micron physical synthesis. In this dissertation, I propose several optimization algorithms from global placement, placement migration, timing driven placements, to incremental power optimizations for multi-objective VLSI design closure. The first work is DPlace, a new global placement algorithm that scales well to the modern large-scale circuit placement problems. DPlace simulates the natural diffusion process to spread cells smoothly over the placement region, and uses both analytical and discrete techniques to improve the wire length. However, global placement is never sufficient for multi-objective design closure, a variety of design objectives have to be improved incrementally, such as timing, routing congestion, signal integrity, and heat distribution. Placement migration is a critical step to address the cell overlaps appearing during incremental optimizations. To achieve high placement stability, I propose a computational geometry based placement migration flow to cope with placement changes, and a new stability metric to measure the “similarity” between two placements accurately. Our placement migration algorithm has clear advantage over conventional legalization algorithms such that the neighborhood characteristics of the original placement are preserved. For timing closure in high performance designs, I present a linear programming based incremental timing driven placement to improve the timing on critical paths directly. I further present an efficient timing driven placement algorithm (Pyramids). Two formulations of Pyramids are proposed, which are suitable for different optimization stages in a physical synthesis flow. Both approaches find the optimal location for timing of a cell in constant time, through computational geometry based approaches. For fast convergence of design closure, placement should be integrated with other optimization techniques. I propose to combine placement, gate sizing and Vt swapping techniques to reduce the total power consumption, especially the leakage power, which is becoming increasingly critical for nanometer VLSI design closure.Electrical and Computer Engineerin

Algorithmic techniques for physical design : macro placement and under-the-cell routing

With the increase of chip component density and new manufacturability constraints imposed by modern technology nodes, the role of algorithms for electronic design automation is key to the successful implementation of integrated circuits. Two of the critical steps in the physical design flows are macro placement and ensuring all design rules are honored after timing closure. This thesis proposes contributions to help in these stages, easing time-consuming manual steps and helping physical design engineers to obtain better layouts in reduced turnaround time. The first contribution is under-the-cell routing, a proposal to systematically connect standard cell components via lateral pins in the lower metal layers. The aim is to reduce congestion in the upper metal layers caused by extra metal and vias, decreasing the number of design rule violations. To allow cells to connect by abutment, a standard cell library is enriched with instances containing lateral pins in a pre-selected sharing track. Algorithms are proposed to maximize the numbers of connections via lateral connection by mapping placed cell instances to layouts with lateral pins, and proposing local placement modifications to increase the opportunities for such connections. Experimental results show a significant decrease in the number of pins, vias, and in number of design rule violations, with negligible impact on wirelength and timing. The second contribution, done in collaboration with eSilicon (a leading ASIC design company), is the creation of HiDaP, a macro placement tool for modern industrial designs. The proposed approach follows a multilevel scheme to floorplan hierarchical blocks, composed of macros and standard cells. By exploiting RTL information available in the netlist, the dataflow affinity between these blocks is modeled and minimized to find a macro placement with good wirelength and timing properties. The approach is further extended to allow additional engineer input, such as preferred macro locations, and also spectral and force methods to guide the floorplanning search. Experimental results show that the layouts generated by HiDaP outperforms those obtained by a state-of-the-art EDA physical design software, with similar wirelength and better timing when compared to manually designed tape-out ready macro placements. Layouts obtained by HiDaP have successfully been brought to near timing closure with one to two rounds of small modifications by physical design engineers. HiDaP has been fully integrated in the design flows of the company and its development remains an ongoing effort.A causa de l'increment de la densitat de components en els xip i les noves restriccions de disseny imposades pels últims nodes de fabricació, el rol de l'algorísmia en l'automatització del disseny electrònic ha esdevingut clau per poder implementar circuits integrats. Dos dels passos crucials en el procés de disseny físic és el placement de macros i assegurar la correcció de les regles de disseny un cop les restriccions de timing del circuit són satisfetes. Aquesta tesi proposa contribucions per ajudar en aquests dos reptes, facilitant laboriosos passos manuals en el procés i ajudant als enginyers de disseny físic a obtenir millors resultats en menys temps. La primera contribució és el routing "under-the-cell", una proposta per connectar cel·les estàndard usant pins laterals en les capes de metall inferior de manera sistemàtica. L'objectiu és reduir la congestió en les capes de metall superior causades per l'ús de metall i vies, i així disminuir el nombre de violacions de regles de disseny. Per permetre la connexió lateral de cel·les, estenem una llibreria de cel·les estàndard amb dissenys que incorporen connexions laterals. També proposem modificacions locals al placement per permetre explotar aquest tipus de connexions més sovint. Els resultats experimentals mostren una reducció significativa en el nombre de pins, vies i nombre de violacions de regles de disseny, amb un impacte negligible en wirelength i timing. La segona contribució, desenvolupada en col·laboració amb eSilicon (una empresa capdavantera en disseny ASIC), és el desenvolupament de HiDaP, una eina de macro placement per a dissenys industrials actuals. La proposta segueix un procés multinivell per fer el floorplan de blocks jeràrquics, formats per macros i cel·les estàndard. Mitjançant la informació RTL disponible en la netlist, l'afinitat de dataflow entre els mòduls es modela i minimitza per trobar macro placements amb bones propietats de wirelength i timing. La proposta també incorpora la possibilitat de rebre input addicional de l'enginyer, com ara suggeriments de les posicions de les macros. Finalment, també usa mètodes espectrals i de forçes per guiar la cerca de floorplans. Els resultats experimentals mostren que els dissenys generats amb HiDaP són millors que els obtinguts per eines comercials capdavanteres de EDA. Els resultats també mostren que els dissenys presentats poden obtenir un wirelength similar i millor timing que macro placements obtinguts manualment, usats per fabricació. Alguns dissenys obtinguts per HiDaP s'han dut fins a timing-closure en una o dues rondes de modificacions incrementals per part d'enginyers de disseny físic. L'eina s'ha integrat en el procés de disseny de eSilicon i el seu desenvolupament continua més enllà de les aportacions a aquesta tesi.Postprint (published version

Algorithmic techniques for physical design : macro placement and under-the-cell routing

With the increase of chip component density and new manufacturability constraints imposed by modern technology nodes, the role of algorithms for electronic design automation is key to the successful implementation of integrated circuits. Two of the critical steps in the physical design flows are macro placement and ensuring all design rules are honored after timing closure. This thesis proposes contributions to help in these stages, easing time-consuming manual steps and helping physical design engineers to obtain better layouts in reduced turnaround time. The first contribution is under-the-cell routing, a proposal to systematically connect standard cell components via lateral pins in the lower metal layers. The aim is to reduce congestion in the upper metal layers caused by extra metal and vias, decreasing the number of design rule violations. To allow cells to connect by abutment, a standard cell library is enriched with instances containing lateral pins in a pre-selected sharing track. Algorithms are proposed to maximize the numbers of connections via lateral connection by mapping placed cell instances to layouts with lateral pins, and proposing local placement modifications to increase the opportunities for such connections. Experimental results show a significant decrease in the number of pins, vias, and in number of design rule violations, with negligible impact on wirelength and timing. The second contribution, done in collaboration with eSilicon (a leading ASIC design company), is the creation of HiDaP, a macro placement tool for modern industrial designs. The proposed approach follows a multilevel scheme to floorplan hierarchical blocks, composed of macros and standard cells. By exploiting RTL information available in the netlist, the dataflow affinity between these blocks is modeled and minimized to find a macro placement with good wirelength and timing properties. The approach is further extended to allow additional engineer input, such as preferred macro locations, and also spectral and force methods to guide the floorplanning search. Experimental results show that the layouts generated by HiDaP outperforms those obtained by a state-of-the-art EDA physical design software, with similar wirelength and better timing when compared to manually designed tape-out ready macro placements. Layouts obtained by HiDaP have successfully been brought to near timing closure with one to two rounds of small modifications by physical design engineers. HiDaP has been fully integrated in the design flows of the company and its development remains an ongoing effort.A causa de l'increment de la densitat de components en els xip i les noves restriccions de disseny imposades pels últims nodes de fabricació, el rol de l'algorísmia en l'automatització del disseny electrònic ha esdevingut clau per poder implementar circuits integrats. Dos dels passos crucials en el procés de disseny físic és el placement de macros i assegurar la correcció de les regles de disseny un cop les restriccions de timing del circuit són satisfetes. Aquesta tesi proposa contribucions per ajudar en aquests dos reptes, facilitant laboriosos passos manuals en el procés i ajudant als enginyers de disseny físic a obtenir millors resultats en menys temps. La primera contribució és el routing "under-the-cell", una proposta per connectar cel·les estàndard usant pins laterals en les capes de metall inferior de manera sistemàtica. L'objectiu és reduir la congestió en les capes de metall superior causades per l'ús de metall i vies, i així disminuir el nombre de violacions de regles de disseny. Per permetre la connexió lateral de cel·les, estenem una llibreria de cel·les estàndard amb dissenys que incorporen connexions laterals. També proposem modificacions locals al placement per permetre explotar aquest tipus de connexions més sovint. Els resultats experimentals mostren una reducció significativa en el nombre de pins, vies i nombre de violacions de regles de disseny, amb un impacte negligible en wirelength i timing. La segona contribució, desenvolupada en col·laboració amb eSilicon (una empresa capdavantera en disseny ASIC), és el desenvolupament de HiDaP, una eina de macro placement per a dissenys industrials actuals. La proposta segueix un procés multinivell per fer el floorplan de blocks jeràrquics, formats per macros i cel·les estàndard. Mitjançant la informació RTL disponible en la netlist, l'afinitat de dataflow entre els mòduls es modela i minimitza per trobar macro placements amb bones propietats de wirelength i timing. La proposta també incorpora la possibilitat de rebre input addicional de l'enginyer, com ara suggeriments de les posicions de les macros. Finalment, també usa mètodes espectrals i de forçes per guiar la cerca de floorplans. Els resultats experimentals mostren que els dissenys generats amb HiDaP són millors que els obtinguts per eines comercials capdavanteres de EDA. Els resultats també mostren que els dissenys presentats poden obtenir un wirelength similar i millor timing que macro placements obtinguts manualment, usats per fabricació. Alguns dissenys obtinguts per HiDaP s'han dut fins a timing-closure en una o dues rondes de modificacions incrementals per part d'enginyers de disseny físic. L'eina s'ha integrat en el procés de disseny de eSilicon i el seu desenvolupament continua més enllà de les aportacions a aquesta tesi

On The Engineering of a Stable Force-Directed Placer

Analytic and force-directed placement methods that simultaneously minimize wire length and spread cells are receiving renewed attention from both academia and industry. However, these methods are by no means trivial to implement---to date, published works have failed to provide sufficient engineering details to replicate results. This dissertation addresses the implementation of a generic force-directed placer entitled FDP. Specifically, this thesis provides (1) a description of efficient force computation for spreading cells, (2) an illustration of numerical instability in this method and a means to avoid the instability, (3) metrics for measuring cell distribution throughout the placement area, and (4) a complementary technique that aids in minimizing wire length. FDP is compared to Kraftwerk and other leading academic tools including Capo, Dragon, and mPG for both standard cell and mixed-size circuits. Wire lengths produced by FDP are found to be, on average, up to 9% and 3% better than Kraftwerk and Capo, respectively. All told, this thesis confirms the validity and applicability of the approach, and provides clarifying details of the intricacies surrounding the implementation of a force-directed global placer

Runtime and quality tradeoffs in FPGA placement and routing

Abstract Many applications of FPGAs, especially logic emulation and custom computing, require the quick placement and routing of circuit designs. In these applications, the advantages FPGA-based systems have over software simulation are diminished by the long run-times of current CAD software used to map the circuit onto FPGAs. To improve the run-time advantage of FPGA systems, users may be willing to trade some mapping quality for a reduction in CAD tool runtimes. In this paper, we seek to establish how much quality degradation is necessary to achieve a given runtime improvement. For this purpose, we implemented and investigated numerous placement and routing algorithms for FPGAs. We also developed new tradeoff-oriented algorithms, where a tuning parameter can be used to control this quality vs. runtime tradeoff. We show how different algorithms can achieve different points within this tradeoff spectrum, as well as how a single algorithm can be tuned to form a curve in the spectrum. We demonstrate that the algorithms vary widely in their tradeoffs, with the fastest algorithm being 8x faster than the slowest, and the highest quality algorithm being 5x better than the least quality algorithm. Compared to the commercial Xilinx CAD tools, we can achieve a 3x speed-up by allowing 1.27x degradation in quality, and a factor of 1.6x quality improvement with 2x slowdown