Direct instruction wakeup for out-of-order processors

Instruction queues consume a significant amount of power in high-performance processors, primarily due to instruction wakeup logic access to the queue structures. The wakeup logic delay is also a critical timing parameter. This paper proposes a new queue organization using a small number of successor pointers plus a small number of dynamically allocated full successor bit vectors for cases with a larger number of successors. The details of the new organization are described and it is shown to achieve the performance of CAM-based or full dependency matrix organizations using just one pointer per instruction plus eight full bit vectors. Only two full bit vectors are needed when two successor pointers are stored per instruction. Finally, a design and pre-layout of all critical structures in 70 nm technology was performed for the proposed organization as well as for a CAM-based baseline. The new design is shown to use 1/2 to 1/5th of the baseline instruction queue power, depending on queue size. It is also shown to use significantly less power than the full dependency matrix based design.Peer ReviewedPostprint (published version

Inherently workload-balanced clustered microarchitecture

The performance of clustered microarchitectures relies on steering schemes that try to find the best trade-off between workload balance and inter-cluster communication penalties. In previously proposed clustered processors, reducing communication penalties and balancing the workload are opposite targets, since improving one usually implies a detriment in the other. In this paper we propose a new clustered microarchitecture that can minimize communication penalties without compromising workload balance. The key idea is to arrange the clusters in a ring topology in such a way that results of one cluster can be forwarded to the neighbor cluster with a very short latency. In this way, minimizing communication penalties is favored when the producer of a value and its consumer are placed in adjacent clusters, which also favors workload balance. The proposed microarchitecture is shown to outperform a state-of-the-art clustered processor. For instance, for an 8-cluster configuration and just one fully pipelined unidirectional bus, 15% speedup is achieved on average for FP programs.Peer ReviewedPostprint (published version

An energy-efficient memory unit for clustered microarchitectures

Whereas clustered microarchitectures themselves have been extensively studied, the memory units for these clustered microarchitectures have received relatively little attention. This article discusses some of the inherent challenges of clustered memory units and shows how these can be overcome. Clustered memory pipelines work well with the late allocation of load/store queue entries and physically unordered queues. Yet this approach has characteristic problems such as queue overflows and allocation patterns that lead to deadlocks. We propose techniques to solve each of these problems and show that a distributed memory unit can offer significant energy savings and speedups over a centralized unit. For instance, compared to a centralized cache with a load/store queue of 64/24 entries, our four-cluster distributed memory unit with load/store queues of 16/8 entries each consumes 31 percent less energy and performs 4,7 percent better on SPECint and consumes 36 percent less energy and performs 7 percent better for SPECfp.Peer ReviewedPostprint (author's final draft

Understanding the impact of 3D stacked layouts on ILP

Journal Article3D die-stacked chips can alleviate the penalties imposed by long wires within micro-processor circuits. Many recent studies have attempted to partition each microprocessor structure across three dimensions to reduce their access times. In this paper, we implement each microprocessor structure on a single 2D die and leverage 3D to reduce the lengths of wires that communicate data between microprocessor structures within a single core. We begin with a criticality analysis of inter-structure wire delays and show that for most tra- ditional simple superscalar cores, 2D floorplans are already very efficient at minimizing critical wire delays. For an aggressive wire-constrained clustered superscalar architecture, an exploration of the design space reveals that 3D can yield higher benefit. However, this benefit may be negated by the higher power density and temperature entailed by 3D integration. Overall, we report a negative result and argue against leveraging 3D for higher ILP

Hybrid Designs for Caches and Cores.

Processor power constraints have come to the forefront over the last decade, heralded by the stagnation of clock frequency scaling. High-performance core and cache designs often utilize power-hungry techniques to increase parallelism. Conversely, the most energy-efficient designs opt for a serial execution to avoid unnecessary overheads. While both of these extremes constitute one-size-fits-all approaches, a judicious mix of parallel and serial execution has the potential to achieve the best of both high-performing and energy-efficient designs. This dissertation examines such hybrid designs for cores and caches. Firstly, we introduce a novel, hybrid out-of-order/in-order core microarchitecture. Instructions that are steered towards in-order execution skip register allocation, reordering and dynamic scheduling. At the same time, these instructions can interleave on an instruction-by-instruction basis with instructions that continue to benefit from these conventional out-of-order mechanisms. Secondly, this dissertation revisits a hybrid technique introduced for L1 caches, way-prediction, in the context of last-level caches that are larger, have higher associativity, and experience less locality.PhDComputer Science and EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/113484/1/sleimanf_1.pd

High-Performance low-vcc in-order core

Power density grows in new technology nodes, thus requiring Vcc to scale especially in mobile platforms where energy is critical. This paper presents a novel approach to decrease Vcc while keeping operating frequency high. Our mechanism is referred to as immediate read after write (IRAW) avoidance. We propose an implementation of the mechanism for an Intel® SilverthorneTM in-order core. Furthermore, we show that our mechanism can be adapted dynamically to provide the highest performance and lowest energy-delay product (EDP) at each Vcc level. Results show that IRAW avoidance increases operating frequency by 57% at 500mV and 99% at 400mV with negligible area and power overhead (below 1%), which translates into large speedups (48% at 500mV and 90% at 400mV) and EDP reductions (0.61 EDP at 500mV and 0.33 at 400mV).Peer ReviewedPostprint (published version

Scalable hardware memory disambiguation

This dissertation deals with one of the long-standing problems in Computer Architecture – the problem of memory disambiguation. Microprocessors typically reorder memory instructions during execution to improve concurrency. Such microprocessors use hardware memory structures for memory disambiguation, known as LoadStore Queues (LSQs), to ensure that memory instruction dependences are satisfied even when the memory instructions execute out-of-order. A typical LSQ implementation (circa 2006) holds all in-flight memory instructions in a physically centralized LSQ and performs a fully associative search on all buffered instructions to ensure that memory dependences are satisfied. These LSQ implementations do not scale because they use large, fully associative structures, which are known to be slow and power hungry. The increasing trend towards distributed microarchitectures further exacerbates these problems. As on-chip wire delays increase and high-performance processors become necessarily distributed, centralized structures such as the LSQ can limit scalability. This dissertation describes techniques to create scalable LSQs in both centralized and distributed microarchitectures. The problems and solutions described in this thesis are motivated and validated by real system designs. The dissertation starts with a description of the partitioned primary memory system of the TRIPS processor, of which the LSQ is an important component, and then through a series of optimizations describes how the power, area, and centralization problems of the LSQ can be solved with minor performance losses (if at all) even for large number of in flight memory instructions. The four solutions described in this dissertation — partitioning, filtering, late binding and efficient overflow management — enable power-, area-efficient, distributed and scalable LSQs, which in turn enable aggressive large-window processors capable of simultaneously executing thousands of instructions. To mitigate the power problem, we replaced the power-hungry, fully associative search with a power-efficient hash table lookup using a simple address-based Bloom filter. Bloom filters are probabilistic data structures used for testing set membership and can be used to quickly check if an instruction with the same data address is likely to be found in the LSQ without performing the associative search. Bloom filters typically eliminate more than 80% of the associative searches and they are highly effective because in most programs, it is uncommon for loads and stores to have the same data address and be in execution simultaneously. To rectify the area problem, we observe the fact that only a small fraction of all memory instructions are dependent, that only such dependent instructions need to be buffered in the LSQ, and that these instructions need to be in the LSQ only for certain parts of the pipelined execution. We propose two mechanisms to exploit these observations. The first mechanism, area filtering, is a hardware mechanism that couples Bloom filters and dependence predictors to dynamically identify and buffer only those instructions which are likely to be dependent. The second mechanism, late binding, reduces the occupancy and hence size of the LSQ. Both of these optimizations allows the number of LSQ slots to be reduced by up to one-half compared to a traditional organization without any performance degradation. Finally, we describe a new decentralized LSQ design for handling LSQ structural hazards in distributed microarchitectures. Decentralization of LSQs, and to a large extent distributed microarchitectures with memory speculation, has proved to be impractical because of the high performance penalties associated with the mechanisms for dealing with hazards. To solve this problem, we applied classic flow-control techniques from interconnection networks for handling resource con- flicts. The first method, memory-side buffering, buffers the overflowing instructions in a separate buffer near the LSQs. The second scheme, execution-side NACKing, sends the overflowing instruction back to the issue window from which it is later re-issued. The third scheme, network buffering, uses the buffers in the interconnection network between the execution units and memory to hold instructions when the LSQ is full, and uses virtual channel flow control to avoid deadlocks. The network buffering scheme is the most robust of all the overflow schemes and shows less than 1% performance degradation due to overflows for a subset of SPEC CPU 2000 and EEMBC benchmarks on a cycle-accurate simulator that closely models the TRIPS processor. The techniques proposed in this dissertation are independent, architectureneutral and their cumulative benefits result in LSQs that can be partitioned at a fine granularity and have low design complexity. Each of these partitions selectively buffers only memory instructions with true dependences and can be closely coupled with the execution units thus minimizing power, area, and latency. Such LSQ designs with near-ideal characteristics are well suited for microarchitectures with thousands of instructions in-flight and may enable even more aggressive microarchitectures in the future.Computer Science

Design and implementation of an out of order execution engine of floating point arithmetic operations

In this thesis, work is undertaken towards the design in hardware description languages and implementation in FPGA of an out of order execution engine of floating point arithmetic operations. This thesis work, is part of a project called Lagarto

Characterization and Avoidance of Critical Pipeline Structures in Aggressive Superscalar Processors

In recent years, with only small fractions of modern processors now accessible in a single cycle, computer architects constantly fight against propagation issues across the die. Unfortunately this trend continues to shift inward, and now the even most internal features of the pipeline are designed around communication, not computation. To address the inward creep of this constraint, this work focuses on the characterization of communication within the pipeline itself, architectural techniques to avoid it when possible, and layout co-design for early detection of problems. I present work in creating a novel detection tool for common case operand movement which can rapidly characterize an applications dataflow patterns. The results produced are suitable for exploitation as a small number of patterns can describe a significant portion of modern applications. Work on dynamic dependence collapsing takes the observations from the pattern results and shows how certain groups of operations can be dynamically grouped, avoiding unnecessary communication between individual instructions. This technique also amplifies the efficiency of pipeline data structures such as the reorder buffer, increasing both IPC and frequency. I also identify the same sets of collapsible instructions at compile time, producing the same benefits with minimal hardware complexity. This technique is also done in a backward compatible manner as the groups are exposed by simple reordering of the binarys instructions. I present aggressive pipelining approaches for these resources which avoids the critical timing often presumed necessary in aggressive superscalar processors. As these structures are designed for the worst case, pipelining them can produce greater frequency benefit than IPC loss. I also use the observation that the dynamic issue order for instructions in aggressive superscalar processors is predictable. Thus, a hardware mechanism is introduced for caching the wakeup order for groups of instructions efficiently. These wakeup vectors are then used to speculatively schedule instructions, avoiding the dynamic scheduling when it is not necessary. Finally, I present a novel approach to fast and high-quality chip layout. By allowing architects to quickly evaluate what if scenarios during early high-level design, chip designs are less likely to encounter implementation problems later in the process.Ph.D.Committee Chair: Scott Wills; Committee Member: David Schimmel; Committee Member: Gabriel Loh; Committee Member: Hsien-Hsin Lee; Committee Member: Yorai Ward