An Evolutionary Computational Approach for the Problem of Unit Commitment and Economic Dispatch in Microgrids under Several Operation Modes

In the last decades, new types of generation technologies have emerged and have been gradually integrated into the existing power systems, moving their classical architectures to distributed systems. Despite the positive features associated to this paradigm, new problems arise such as coordination and uncertainty. In this framework, microgrids constitute an effective solution to deal with the coordination and operation of these distributed energy resources. This paper proposes a Genetic Algorithm (GA) to address the combined problem of Unit Commitment (UC) and Economic Dispatch (ED). With this end, a model of a microgrid is introduced together with all the control variables and physical constraints. To optimally operate the microgrid, three operation modes are introduced. The first two attend to optimize economical and environmental factors, while the last operation mode considers the errors induced by the uncertainties in the demand forecasting. Therefore, it achieves a robust design that guarantees the power supply for different confidence levels. Finally, the algorithm was applied to an example scenario to illustrate its performance. The achieved simulation results demonstrate the validity of the proposed approach.Ministerio de Ciencia, Innovación y Universidades TEC2016-80242-PMinisterio de Economía y Competitividad PCIN-2015-043Universidad de Sevilla Programa propio de I+D+

Microgrid design, control, and performance evaluation for sustainable energy management in manufacturing

This research studies the capacity sizing, control strategies, and performance evaluation of the microgrids with hybrid renewable sources for manufacturing end use customers towards a distributed sustainable energy system paradigm. Microgrid technology has been widely investigated and applied in commercial and residential sector, while for manufacturers, it has been less explored and utilized. To fill the gap, the dissertation first proposes a cost-effective sizing model to identify the capacities as well as control strategies of the components in microgrids considering a commonly used energy tariff, i.e., Time of Use (TOU). Then, the sizing model is extended by integrating control strategies for both microgrid components and manufacturing systems considering a typical demand response program, i.e., Critical Peak Pricing (CPP), where customer side load adjustment is highly encouraged. After that, the control strategy of the manufacturers in an overgeneration mitigation-oriented demand response program is further investigated based on the identified optimal size of onsite microgrid to minimize the energy cost. Later, the system is analyzed from its higher level of abstraction where a prosumer community is developed by aggregating such manufacturers with onsite microgrid system. To enhance the reliable energy operation in the community, the performance of the microgrid is investigated through the estimation of the lifetime of Battery Energy Storage System (BESS), a critical design parameter the architecture. Finally, conclusions are presented and future research on real-time joint control strategy for both microgrids and manufacturing systems and identification as well as optimal energy management of the controllable loads in manufacturing system are discussed --Abstract, page iii

Agent-based technology applied to power systems reliability

Tese de doutoramento. Engenharia Electrotécnica e de Computadores. Faculdade de Engenharia. Universidade do Porto. 200

Intelligent Data Fusion for Applied Decision Support

Data fusion technologies are widely applied to support a real-time decision-making in complicated, dynamically changing environments. Due to the complexity in the problem domain, artificial intelligent algorithms, such as Bayesian inference and particle swarm optimization, are employed to make the decision support system more adaptive and cognitive. This dissertation proposes a new data fusion model with an intelligent mechanism adding decision feedback to the system in real-time, and implements this intelligent data fusion model in two real-world applications. The first application is designing a new sensor management system for a real-world and highly dynamic air traffic control problem. The main objective of sensor management is to schedule discrete-time, two-way communications between sensors and transponder-equipped aircraft over a given coverage area. Decisions regarding allocation of sensor resources are made to improve the efficiency of sensors and communications, simultaneously. For the proposed design, its loop nature takes account the effect of the current sensor model into the next scheduling interval, which makes the sensor management system able to respond to the dynamically changing environment in real-time. Moreover, it uses a Bayesian network as the mission manager to come up with operating requirements for each region every scheduling interval, so that the system efficiently balances the allocation of sensor resources according to different region priorities. As one of this dissertation\u27s contribution in the area of Bayesian inference, the resulting Bayesian mission manager is shown to demonstrate significant performance improvement in resource usage for prioritized regions such as a runway in the air traffic control application for airport surfaces. Due to wind\u27s importance as a renewable energy resource, the second application is designing an intelligent data-driven approach to monitor the wind turbine performance in real-time by fusing multiple types of maintenance tests, and detect the turbine failures by tracking the turbine maintenance statistics. The current focus has been on building wind farms without much effort towards the optimization of wind farm management. Also, under performing or faulty turbines cause huge losses in revenue as the existing wind farms age. Automated monitoring for maintenance and optimizing of wind farm operations will be a key element in the transition of wind power from an alternative energy form to a primary form. Early detection and prediction of catastrophic failures helps prevent major maintenance costs from occurring as well. I develop multiple tests on several important turbine performance variables, such as generated power, rotor speed, pitch angle, and wind speed difference. Wind speed differences are particularly effective in the detection of anemometer failures, which is a very common maintenance issue that greatly impacts power production yet can produce misleading symptoms. To improve the detection accuracy of this wind speed difference test, I discuss a new method to determine the decision boundary between the normal and abnormal states using a particle swarm optimization (PSO) algorithm. All the test results are fused to reach a final conclusion, which describes the turbine working status at the current time. Then, Bayesian inference is applied to identify potential failures with a percentage certainty by monitoring the abnormal status changes. This approach is adaptable to each turbine automatically, and is advantageous in its data-driven nature to monitor a large wind farm. This approach\u27s results have verified the effectiveness of detecting turbine failures early, especially for anemometer failures

Optimización del diseño estructural de pavimentos asfálticos para calles y carreteras

gráficos, tablasThe construction of asphalt pavements in streets and highways is an activity that requires optimizing the consumption of significant economic and natural resources. Pavement design optimization meets contradictory objectives according to the availability of resources and users’ needs. This dissertation explores the application of metaheuristics to optimize the design of asphalt pavements using an incremental design based on the prediction of damage and vehicle operating costs (VOC). The costs are proportional to energy and resource consumption and polluting emissions. The evolution of asphalt pavement design and metaheuristic optimization techniques on this topic were reviewed. Four computer programs were developed: (1) UNLEA, a program for the structural analysis of multilayer systems. (2) PSO-UNLEA, a program that uses particle swarm optimization metaheuristic (PSO) for the backcalculation of pavement moduli. (3) UNPAVE, an incremental pavement design program based on the equations of the North American MEPDG and includes the computation of vehicle operating costs based on IRI. (4) PSO-PAVE, a PSO program to search for thicknesses that optimize the design considering construction and vehicle operating costs. The case studies show that the backcalculation and structural design of pavements can be optimized by PSO considering restrictions in the thickness and the selection of materials. Future developments should reduce the computational cost and calibrate the pavement performance and VOC models. (Texto tomado de la fuente)La construcción de pavimentos asfálticos en calles y carreteras es una actividad que requiere la optimización del consumo de cuantiosos recursos económicos y naturales. La optimización del diseño de pavimentos atiende objetivos contradictorios de acuerdo con la disponibilidad de recursos y las necesidades de los usuarios. Este trabajo explora el empleo de metaheurísticas para optimizar el diseño de pavimentos asfálticos empleando el diseño incremental basado en la predicción del deterioro y los costos de operación vehicular (COV). Los costos son proporcionales al consumo energético y de recursos y las emisiones contaminantes. Se revisó la evolución del diseño de pavimentos asfálticos y el desarrollo de técnicas metaheurísticas de optimización en este tema. Se desarrollaron cuatro programas de computador: (1) UNLEA, programa para el análisis estructural de sistemas multicapa. (2) PSO-UNLEA, programa que emplea la metaheurística de optimización con enjambre de partículas (PSO) para el cálculo inverso de módulos de pavimentos. (3) UNPAVE, programa de diseño incremental de pavimentos basado en las ecuaciones de la MEPDG norteamericana, y el cálculo de costos de construcción y operación vehicular basados en el IRI. (4) PSO-PAVE, programa que emplea la PSO en la búsqueda de espesores que permitan optimizar el diseño considerando los costos de construcción y de operación vehicular. Los estudios de caso muestran que el cálculo inverso y el diseño estructural de pavimentos pueden optimizarse mediante PSO considerando restricciones en los espesores y la selección de materiales. Los desarrollos futuros deben enfocarse en reducir el costo computacional y calibrar los modelos de deterioro y COV.DoctoradoDoctor en Ingeniería - Ingeniería AutomáticaDiseño incremental de pavimentosEléctrica, Electrónica, Automatización Y Telecomunicacione

A Comprehensive Survey on Particle Swarm Optimization Algorithm and Its Applications

Particle swarm optimization (PSO) is a heuristic global optimization method, proposed originally by Kennedy and Eberhart in 1995. It is now one of the most commonly used optimization techniques. This survey presented a comprehensive investigation of PSO. On one hand, we provided advances with PSO, including its modifications (including quantum-behaved PSO, bare-bones PSO, chaotic PSO, and fuzzy PSO), population topology (as fully connected, von Neumann, ring, star, random, etc.), hybridization (with genetic algorithm, simulated annealing, Tabu search, artificial immune system, ant colony algorithm, artificial bee colony, differential evolution, harmonic search, and biogeography-based optimization), extensions (to multiobjective, constrained, discrete, and binary optimization), theoretical analysis (parameter selection and tuning, and convergence analysis), and parallel implementation (in multicore, multiprocessor, GPU, and cloud computing forms). On the other hand, we offered a survey on applications of PSO to the following eight fields: electrical and electronic engineering, automation control systems, communication theory, operations research, mechanical engineering, fuel and energy, medicine, chemistry, and biology. It is hoped that this survey would be beneficial for the researchers studying PSO algorithms

Optimization of Vehicle-to-Grid Scheduling in Constrained Parking Lots

An automatic Vehicle-to-Grid (V2G) technology can contribute to the utility grid. V2G technology has drawn great interest in the recent years. Success of the sophisticated automatic V2G research depends on efficient scheduling of gridable vehicles in constrained parking lots. Parking lots have constraints of space and current limits for V2G. However, V2G can reduce dependencies on small expensive units in the existing power systems as energy storage that can decrease running costs. It can efficiently manage load fluctuation, peak load; however, it increases spinning reserves and reliability. As number of gridable vehicles in V2G is much higher than small units of existing systems, unit commitment (UC) with V2G is more complex than basic UC for only thermal units. Particle swarm optimization (PSO) is proposed to solve the V2G, as PSO has been demonstrated to reliably and accurately solve complex constrained optimization problems easily and quickly without any dimension limitation and physical computer memory limit. In the proposed model, binary PSO optimizes the on/off states of power generating units easily. Vehicles are presented by signed integer number instead of 0/1 to reduce the dimension of the problem. Typical discrete version of PSO has less balance between local and global searching abilities to optimize the number of charging/discharging gridable vehicles in the constrained system. In the same model, balanced PSO is proposed to optimize the V2G part in the constrained parking lots. Finally, results show a considerable amount of profit for using proper scheduling of gridable vehicles in constrained parking lots