Crosstalk-free Conjugate Networks for Optical Multicast Switching

High-speed photonic switching networks can switch optical signals at the rate of several terabits per second. However, they suffer from an intrinsic crosstalk problem when two optical signals cross at the same switch element. To avoid crosstalk, active connections must be node-disjoint in the switching network. In this paper, we propose a sequence of decomposition and merge operations, called conjugate transformation, performed on each switch element to tackle this problem. The network resulting from this transformation is called conjugate network. By using the numbering-schemes of networks, we prove that if the route assignments in the original network are link-disjoint, their corresponding ones in the conjugate network would be node-disjoint. Thus, traditional nonblocking switching networks can be transformed into crosstalk-free optical switches in a routine manner. Furthermore, we show that crosstalk-free multicast switches can also be obtained from existing nonblocking multicast switches via the same conjugate transformation.Comment: 10 page

Symmetric rearrangeable networks and algorithms

A class of symmetric rearrangeable nonblocking networks has been considered in this thesis. A particular focus of this thesis is on Benes networks built with 2 x 2 switching elements. Symmetric rearrangeable networks built with larger switching elements have also being considered. New applications of these networks are found in the areas of System on Chip (SoC) and Network on Chip (NoC). Deterministic routing algorithms used in NoC applications suffer low scalability and slow execution time. On the other hand, faster algorithms are blocking and thus limit throughput. This will be an acceptable trade-off for many applications where achieving ”wire speed” on the on-chip network would require extensive optimisation of the attached devices. In this thesis I designed an algorithm that has much lower blocking probabilities than other suboptimal algorithms but a much faster execution time than deterministic routing algorithms. The suboptimal method uses the looping algorithm in its outermost stages and then in the two distinct subnetworks deeper in the switch uses a fast but suboptimal path search method to find available paths. The worst case time complexity of this new routing method is O(NlogN) using a single processor, which matches the best known results reported in the literature. Disruption of the ongoing communications in this class of networks during rearrangements is an open issue. In this thesis I explored a modification of the topology of these networks which gives rise to what is termed as repackable networks. A repackable topology allows rearrangements of paths without intermittently losing connectivity by breaking the existing communication paths momentarily. The repackable network structure proposed in this thesis is efficient in its use of hardware when compared to other proposals in the literature. As most of the deterministic algorithms designed for Benes networks implement a permutation of all inputs to find the routing tags for the requested inputoutput pairs, I proposed a new algorithm that can work for partial permutations. If the network load is defined as ρ, the mean number of active inputs in a partial permutation is, m = ρN, where N is the network size. This new method is based on mapping the network stages into a set of sub-matrices and then determines the routing tags for each pair of requests by populating the cells of the sub-matrices without creating a blocking state. Overall the serial time complexity of this method is O(NlogN) and O(mlogN) where all N inputs are active and with m < N active inputs respectively. With minor modification to the serial algorithm this method can be made to work in the parallel domain. The time complexity of this routing algorithm in a parallel machine with N completely connected processors is O(log^2 N). With m active requests the time complexity goes down to (logmlogN), which is better than the O(log^2 m + logN), reported in the literature for 2^0.5((log^2 -4logN)^0.5-logN)<= ρ <= 1. I also designed multistage symmetric rearrangeable networks using larger switching elements and implement a new routing algorithm for these classes of networks. The network topology and routing algorithms presented in this thesis should allow large scale networks of modest cost, with low setup times and moderate blocking rates, to be constructed. Such switching networks will be required to meet the bandwidth requirements of future communication networks

Optimal control of Beneš optical networks assisted by machine learning

Optimal control of Beneˇs optical networks assisted by machine learning Ihtesham Khana, Lorenzo Tunesia, Muhammad Umar Masooda, Enrico Ghillinob, Paolo Bardellaa, Andrea Carenaa, and Vittorio Curria aPolitecnico di Torino, Corso Duca degli Abruzzi 24, Torino, Italy bSynopsys Inc., Executive Blvd 101, Ossining, New York, USA ABSTRACT Beneˇs networks represent an excellent solution for the routing of optical telecom signals in integrated, fully reconfigurable networks because of their limited number of elementary 2x2 crossbar switches and their non- blocking properties. Various solutions have been proposed to determine a proper Control State (CS) providing the required permutation of the input channels; since for a particular permutation, the choice is not unique, the number of cross-points has often been used to estimate the cost of the routing operation. This work presents an advanced version of this approach: we deterministically estimate all (or a reasonably large number of) the CSs corresponding to the permutation requested by the user. After this, the retrieved CSs are exploited by a data- driven framework to predict the Optical Signal to Noise Ratio (OSNR) penalty for each CS at each output port, finally selecting the CS providing minimum OSNR penalty. Moreover, three different data-driven techniques are proposed, and their prediction performance is analyzed and compared. The proposed approach is demonstrated using 8x8 Beneˇs architecture with 20 ring resonator-based crossbar switches. The dataset of 1000 OSNRs realizations is generated synthetically for random combinations of the CSs using Synopsys® Optsim™ simulator. The computational cost of the proposed scheme enables its real-time operation in the field

Machine Learning for Multi-Layer Open and Disaggregated Optical Networks

L'abstract è presente nell'allegato / the abstract is in the attachmen

Design techniques to enhance low-power wireless communication soc with reconfigurability and wake up radio

Nowadays, Internet of things applications are increasing, and each end-node has more demanding requirements such as energy efficiency and speed. The thesis proposes a heterogeneous elaboration unit for smart power applications, that consists of an ultra-low-power microcontroller coupled with a small (around 1k equivalent gates) soft-core of embedded FPGA. This digital system is implemented in 90-nm BCD technology of STMicroelectronics, and through the analysis presented in this thesis proves to have good performance in terms of power consumption and latency. The idea is to increase the system performance exploiting the embedded FPGA to managing smart power tasks. For the intended applications, a remarkable computational load is not required, it is just required the implementation of simple finite state machines, since they are event-driven applications. In this way, while the microcontroller deals with other system computations such as high-level communications, the eFPGA can efficiently manage smart power applications. An added value of the proposed elaboration unit is that a soft-core approach is applied to the whole digital system including the eFPGA, and hence, it is portable to different technologies. On the other hand, the configurability improvement has a straightforward drawback of about a 20–27% area overhead. The eFPGA usage to manage smart power applications, allows the system to reduce the required energy per task from about 400 to around 800 times compared to a processor implementation. The eFPGA utilization improves also the latency performance of the system reaching from 8 to 145 times less latency in terms of clock cycles. The thesis also introduces the architecture of a nano-watt wake-up radio integrated circuit implemented in 90-nm BCD technology of STMicroelectronics. The wake-up radio is an auxiliary always-on radio for medium-range applications that allows the IoT end-nodes to drastically reduce the power consumption during the node idle-listening communication phase

Energy Efficient High Port Count Optical Switches

The advance of internet applications, such as video streaming, big data and cloud computing, is reshaping the telecommunication and internet industries. Bandwidth demands in datacentres have been boosted by these emerging data-hungry internet applications. Regarding inter- and intra-datacentre communications, fine-grained data need to be exchanged across a large shared memory space. Large-scale high-speed optical switches tend to use a rearrangeably non-blocking architecture as this limits the number of switching elements required. However, this comes at the expense of requiring more sophisticated route selection within the switch and also some forms of time-slotted protocols. The looping algorithm is the classical routing algorithm to set up paths in rearrangeably non-blocking switches. It was born in the electronic switch era, where all links in the switches are equal. It is, therefore, not able to accommodate loss difference between optical paths due to the different length of waveguides and distinct numbers of crossings, and bends, leading to sub-optimal performance. We, therefore, propose an advanced path-selection algorithm based on the looping algorithm that minimises the path-dependent loss. It explores all possible set-ups for a given connection assignment and selects the optimal one. It guarantees that no individual path would have a sufficiently substantial loss, therefore, improve the overall performance of the switch. The performance of the proposed algorithm has been assessed by modelling switches using the VPI simulator. An 8×8 Clos-tree switch demonstrates a 2.7dB decrease in loss and 1.9dB improvement in IPDR with 1.5 dB penalty for the worst case. An 8×8 dilated Beneš shows more than 4 dB loss reduction for the lossiest path and 1.4 dB IPDR improvement for 1 dB power penalty. The improved algorithm can be run once for each switch design and store its output in a compact lookup table, enabling rapid switch reconfiguration. Microelectromechanical systems (MEMS) based optical switches have been fabricated with over 1,000 ports which meet the port count requirements in data centre networks. However, the reconfiguration speed of the MEMS switches is limited to the millisecond to microsecond timescale, which is not sufficient for packet switching in datacentres. Opto-electronic devices, such as Mach-Zehnder Interferometers (MZIs) and semiconductor optical amplifiers (SOAs) with nanosecond response time show the potential to fulfil the requirements of packet switching. However, the scalability of MZI switches is inherently limited by insertion loss and accumulated crosstalk, while the scalability of SOA switches is restricted by accumulated noise and distortion. We, therefore, have proposed a dilated Beneš hybrid MZI-SOA design, where MZIs are implemented as 1×2 or 2×1 low-loss switching elements, minimising crosstalk by using a single input, and where short SOAs are included as gain or absorption units, offering either loss compensation or crosstalk suppression though adding only minimal noise and distortion. A 4×4 device has been fabricated and exhibits a mere 1.3dB loss, an extinction ratio of 47dB, and more than 13dB IPDR for a 0.5dB power penalty. When operating with 10 Gb/s per port, 6pJ/bit energy consumption is demonstrated, delivering 20% reduced energy consumption compared with SOA-based switches. The tolerance of the current control accuracy of this switch is very broad. Within a 5 mA bias current range, the power penalty can be maintained below 0.2 dB for 8 dB IPDR and 12 mA for 10 dB IPDR with a penalty less 0.5 dB. The excellent crosstalk and power penalty performance demonstrated by this chip enable the scalability of this hybrid approach. The performance of 16×16 port dilated Beneš hybrid switch is experimentally assessed by cascading 4×4 switch chips, demonstrating an IPDR of 15 dB at a 1 dB penalty with a 0.6 dB power penalty floor. In terms of switches with port count larger than 16×16, the power penalty performance has been analysed with physical layer simulations fitted with state-of-the-art data. We assess the feasibility of three potential topologies, with different architectural optimisations: dilated Beneš, Beneš and Clos-Beneš. Quantitative analysis for switches with up to 2048 ports is presented, achieving a 1.15dB penalty for a BER of 10-3, compatible with soft-decision forward error correction.Cambridge Overseas Trust; China Scholarship Council

Control Plane Hardware Design for Optical Packet Switched Data Centre Networks

Optical packet switching for intra-data centre networks is key to addressing traffic requirements. Photonic integration and wavelength division multiplexing (WDM) can overcome bandwidth limits in switching systems. A promising technology to build a nanosecond-reconfigurable photonic-integrated switch, compatible with WDM, is the semiconductor optical amplifier (SOA). SOAs are typically used as gating elements in a broadcast-and-select (B\&S) configuration, to build an optical crossbar switch. For larger-size switching, a three-stage Clos network, based on crossbar nodes, is a viable architecture. However, the design of the switch control plane, is one of the barriers to packet switching; it should run on packet timescales, which becomes increasingly challenging as line rates get higher. The scheduler, used for the allocation of switch paths, limits control clock speed. To this end, the research contribution was the design of highly parallel hardware schedulers for crossbar and Clos network switches. On a field-programmable gate array (FPGA), the minimum scheduler clock period achieved was 5.0~ns and 5.4~ns, for a 32-port crossbar and Clos switch, respectively. By using parallel path allocation modules, one per Clos node, a minimum clock period of 7.0~ns was achieved, for a 256-port switch. For scheduler application-specific integrated circuit (ASIC) synthesis, this reduces to 2.0~ns; a record result enabling scalable packet switching. Furthermore, the control plane was demonstrated experimentally. Moreover, a cycle-accurate network emulator was developed to evaluate switch performance. Results showed a switch saturation throughput at a traffic load 60\% of capacity, with sub-microsecond packet latency, for a 256-port Clos switch, outperforming state-of-the-art optical packet switches

Journal of Telecommunications and Information Technology, 2018, nr 1

kwartalni