An integrated placement and routing approach

As the feature size continues scaling down, interconnects become the major contributor of signal delay. Since interconnects are mainly determined by placement and routing, these two stages play key roles to achieve high performance. Historically, they are divided into two separate stages to make the problem tractable. Therefore, the routing information is not available during the placement process. Net models such as HPWL, are employed to approximate the routing to simplify the placement problem. However, the good placement in terms of these objectives may not be routable at all in the routing stage because different objectives are optimized in placement and routing stages. This inconsistancy makes the results obtained by the two-step optimization method far from optimal;In order to achieve high-quality placement solution and ensure the following routing, we propose an integrated placement and routing approach. In this approach, we integrate placement and routing into the same framework so that the objective optimized in placement is the same as that in routing. Since both placement and routing are very hard problems (NP-hard), we need to have very efficient algorithms so that integrating them together will not lead to intractable complexity;In this dissertation, we first develop a highly efficient placer - FastPlace 3.0 for large-scale mixed-size placement problem. Then, an efficient and effective detailed placer - FastDP is proposed to improve global placement by moving standard cells in designs. For high-degree nets in designs, we propose a novel performance-driven topology design algorithm to generate good topologies to achieve very strict timing requirement. In the routing phase, we develop two global routers, FastRoute and FastRoute 2.0. Compared to traditional global routers, they can generate better solutions and are two orders of magnitude faster. Finally, based on these efficient and high-quality placement and routing algorithms, we propose a new flow which integrates placement and routing together closely. In this flow, global routing is extensively applied to obtain the interconnect information and direct the placement process. In this way, we can get very good placement solutions with guaranteed routability

Layout optimization in ultra deep submicron VLSI design

As fabrication technology keeps advancing, many deep submicron (DSM) effects have become increasingly evident and can no longer be ignored in Very Large Scale Integration (VLSI) design. In this dissertation, we study several deep submicron problems (eg. coupling capacitance, antenna effect and delay variation) and propose optimization techniques to mitigate these DSM effects in the place-and-route stage of VLSI physical design. The place-and-route stage of physical design can be further divided into several steps: (1) Placement, (2) Global routing, (3) Layer assignment, (4) Track assignment, and (5) Detailed routing. Among them, layer/track assignment assigns major trunks of wire segments to specific layers/tracks in order to guide the underlying detailed router. In this dissertation, we have proposed techniques to handle coupling capacitance at the layer/track assignment stage, antenna effect at the layer assignment, and delay variation at the ECO (Engineering Change Order) placement stage, respectively. More specifically, at layer assignment, we have proposed an improved probabilistic model to quickly estimate the amount of coupling capacitance for timing optimization. Antenna effects are also handled at layer assignment through a linear-time tree partitioning algorithm. At the track assignment stage, timing is further optimized using a graph based technique. In addition, we have proposed a novel gate splitting methodology to reduce delay variation in the ECO placement considering spatial correlations. Experimental results on benchmark circuits showed the effectiveness of our approaches

AI/ML Algorithms and Applications in VLSI Design and Technology

An evident challenge ahead for the integrated circuit (IC) industry in the nanometer regime is the investigation and development of methods that can reduce the design complexity ensuing from growing process variations and curtail the turnaround time of chip manufacturing. Conventional methodologies employed for such tasks are largely manual; thus, time-consuming and resource-intensive. In contrast, the unique learning strategies of artificial intelligence (AI) provide numerous exciting automated approaches for handling complex and data-intensive tasks in very-large-scale integration (VLSI) design and testing. Employing AI and machine learning (ML) algorithms in VLSI design and manufacturing reduces the time and effort for understanding and processing the data within and across different abstraction levels via automated learning algorithms. It, in turn, improves the IC yield and reduces the manufacturing turnaround time. This paper thoroughly reviews the AI/ML automated approaches introduced in the past towards VLSI design and manufacturing. Moreover, we discuss the scope of AI/ML applications in the future at various abstraction levels to revolutionize the field of VLSI design, aiming for high-speed, highly intelligent, and efficient implementations

Variation and power issues in VLSI clock networks

Clock Distribution Network (CDN) is an important component of any synchronous logic circuit. The function of CDN is to deliver the clock signal to the clock sinks. Clock skew is defined as the difference in the arrival time of the clock signal at the clock sinks. Higher uncertainty in skew (due to PVT variations) degrades circuit performance by decreasing the maximum possible delay between any two sequential elements. Aggressive frequency scaling has also led to high power consumption especially in CDN. This dissertation addresses variation and power issues in the design of current and potential future CDN. The research detailed in this work presents algorithmic techniques for the following problems: (1) Variation tolerance in useful skew design, (2) Link insertion for buffered clock nets, (3) Methodology and algorithms for rotary clocking and (4) Clock mesh optimization for skew-power trade off. For clock trees this dissertation presents techniques to integrate the different aspects of clock tree synthesis (skew scheduling, abstract topology and layout embedding) into one framework- tolerance to variations. This research addresses the issues involved in inserting cross-links in a buffered clock tree and proposes design criteria to avoid the risk of short-circuit current. Rotary clocking is a promising new clocking scheme that consists of unterminated rings formed by differential transmission lines. Rotary clocking achieves reduction in power dissipation clock skew. This dissertation addresses the issues in adopting current CAD methodology to rotary clocks. Alternative methodology and corresponding algorithmic techniques are detailed. Clock mesh is a popular form of CDN used in high performance systems. The problem of simultaneous sizing and placement of mesh buffers in a clock mesh is addressed. The algorithms presented remove the edges from the clock mesh to trade off skew tolerance for low power. For clock trees as well as link insertion, our experiments indicate significant reduction in clock skew due to variations. For clock mesh, experimental results indicate 18.5% reduction in power with 1.3% delay penalty on a average. In summary, this dissertation details methodologies/algorithms that address two critical issues- variation and power dissipation in current and potential future CDN

Algorithms for the scaling toward nanometer VLSI physical synthesis

Along the history of Very Large Scale Integration (VLSI), we have successfully scaled down the size of transistors, scaled up the speed of integrated circuits (IC) and the number of transistors in a chip - these are just a few examples of our achievement in VLSI scaling. It is projected to enter the nanometer (timing estimation and buffer planning for global routing and other early stages such as floorplanning. A novel path based buffer insertion scheme is also included, which can overcome the weakness of the net based approaches. Part-2 Circuit clustering techniques with the application in Field-Programmable Gate Array (FPGA) technology mapping The problem of timing driven n-way circuit partitioning with application to FPGA technology mapping is studied and a hierarchical clustering approach is presented for the latest multi-level FPGA architectures. Moreover, a more general delay model is included in order to accurately characterize the delay behavior of the clusters and circuit elements

High-Performance Placement and Routing for the Nanometer Scale.

Modern semiconductor manufacturing facilitates single-chip electronic systems that only five years ago required ten to twenty chips. Naturally, design complexity has grown within this period. In contrast to this growth, it is becoming common in the industry to limit design team size which places a heavier burden on design automation tools. Our work identifies new objectives, constraints and concerns in the physical design of systems-on-chip, and develops new computational techniques to address them. In addition to faster and more relevant design optimizations, we demonstrate that traditional design flows based on ``separation of concerns'' produce unnecessarily suboptimal layouts. We develop new integrated optimizations that streamline traditional chains of loosely-linked design tools. In particular, we bridge the gap between mixed-size placement and routing by updating the objective of global and detail placement to a more accurate estimate of routed wirelength. To this we add sophisticated whitespace allocation, and the combination provides increased routability, faster routing, shorter routed wirelength, and the best via counts of published techniques. To further improve post-routing design metrics, we present new global routing techniques based on Discrete Lagrange Multipliers (DLM) which produce the best routed wirelength results on recent benchmarks. Our work culminates in the integration of our routing techniques within an incremental placement flow to improve detailed routing solutions, shrink die sizes and reduce total chip cost. Not only do our techniques improve the quality and cost of designs, but also simplify design automation software implementation in many cases. Ultimately, we reduce the time needed for design closure through improved tool fidelity and the use of our incremental techniques for placement and routing.Ph.D.Computer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/64639/1/royj_1.pd

Performance and power optimization in VLSI physical design

As VLSI technology enters the nanoscale regime, a great amount of efforts have been made to reduce interconnect delay. Among them, buffer insertion stands out as an effective technique for timing optimization. A dramatic rise in on-chip buffer density has been witnessed. For example, in two recent IBM ASIC designs, 25% gates are buffers. In this thesis, three buffer insertion algorithms are presented for the procedure of performance and power optimization. The second chapter focuses on improving circuit performance under inductance effect. The new algorithm works under the dynamic programming framework and runs in provably linear time for multiple buffer types due to two novel techniques: restrictive cost bucketing and efficient delay update. The experimental results demonstrate that our linear time algorithm consistently outperforms all known RLC buffering algorithms in terms of both solution quality and runtime. That is, the new algorithm uses fewer buffers, runs in shorter time and the buffered tree has better timing. The third chapter presents a method to guarantee a high fidelity signal transmission in global bus. It proposes a new redundant via insertion technique to reduce via variation and signal distortion in twisted differential line. In addition, a new buffer insertion technique is proposed to synchronize the transmitted signals, thus further improving the effectiveness of the twisted differential line. Experimental results demonstrate a 6GHz signal can be transmitted with high fidelity using the new approaches. In contrast, only a 100MHz signal can be reliably transmitted using a single-end bus with power/ground shielding. Compared to conventional twisted differential line structure, our new techniques can reduce the magnitude of noise by 45% as witnessed in our simulation. The fourth chapter proposes a buffer insertion and gate sizing algorithm for million plus gates. The algorithm takes a combinational circuit as input instead of individual nets and greatly reduces the buffer and gate cost of the entire circuit. The algorithm has two main features: 1) A circuit partition technique based on the criticality of the primary inputs, which provides the scalability for the algorithm, and 2) A linear programming formulation of non-linear delay versus cost tradeoff, which formulates the simultaneous buffer insertion and gate sizing into linear programming problem. Experimental results on ISCAS85 circuits show that even without the circuit partition technique, the new algorithm achieves 17X speedup compared with path based algorithm. In the meantime, the new algorithm saves 16.0% buffer cost, 4.9% gate cost, 5.8% total cost and results in less circuit delay