Robust MPC for actuator-fault tolerance using set-based passive fault detection and active fault isolation

In this paper, an actuator fault-tolerant control (FTC) scheme is proposed, which is based on tube-based model predictive control (MPC) and set-theoretic fault detection and isolation (FDI). As a robust MPC technique, tube-based MPC, can effectively deal with system constraints and uncertainties with relatively low computational complexity. Set-based FDI can robustly detect and isolate actuator faults. Here, fault detection (FD) is passive by invariant sets, while fault isolation (FI) is active by tubes. Using the constraint-handling ability of MPC controllers, an active FI approach is implemented. A numerical example illustrates the effectiveness of the proposed approach.Postprint (author’s final draft

Distributed Model Predictive Control for Reconfigurable Large-Scale Systems

Large-scale Systems are gaining more importance in the modern world requiring flexible techniques capable of handling interactions. This thesis is concerned with the development of suitable algorithms based on Model Predictive Control (MPC) that guarantee stability, recursive feasibility and constraint satisfaction. In the first part of this thesis, the main properties and control challenges for controlling an Large-Scale System are brought together, and the main distributed approaches for solving these problems are surveyed. Also, two novel Distributed MPC algorithms are presented. A non-centralised approach to the output-feedback variant of tube-based model predictive control of dynamically coupled linear time-invariant systems with shared constraints. A tube-based algorithm capable of handling the interactions–not rejecting them– that replaces the conventional linear disturbance rejection controller with a second MPC controller, as is done in tube-based nonlinear MPC. Following this, a smart-grids application of the developed algorithm is presented to solve the load frequency control for a power network. The approach achieves guaranteed constraint satisfaction, the recursive feasibility of the MPC problems and stability while maintaining on-line complexity similar to conventional MPC. The second part of the thesis covers reconfigurable distributed MPC. Two novel approaches are considered: a nominal MPC methodology that incorporates information of external disturbances, and a coalitional approach for robust distributed MPC. The first approach uses available disturbance predictions within a nominal model predictive control formulation is studied. The main challenge that arises is the loss of recursive feasibility and stability guarantees when a disturbance, which may change from time step to time step, is resent in the model and on the system. We show how standard stabilising terminal conditions may be modified to account for the use of disturbances in the prediction model. Robust stability and feasibility are established under the assumption that the disturbance change across sampling instances is limited. The proposed coalitional approach to robust Distributed MPC aims to tackle the existing trade-off between communication and performance in Large-Scale System by exploiting the different network topologies of system dynamics. The algorithm employs a method to switch between topologies using a multi-rate control approach. The optimal topology selection problem is solved using a consensus approach appropriately constrained to reduce the effects of any combinatorial explosion. The robust control algorithm is capable of recomputing the necessary parameters online to readjust to new partitions. Robust constraint satisfaction, recursive and stability are guaranteed by the proposed algorithm

Plug-and-Play Model Predictive Control based on robust control invariant sets

In this paper we consider a linear system represented by a coupling graph between subsystems and propose a distributed control scheme capable to guarantee asymptotic stability and satisfaction of constraints on system inputs and states. Most importantly, as in Riverso et al., 2012 our design procedure enables plug-and-play (PnP) operations, meaning that (i) the addition or removal of subsystems triggers the design of local controllers associated to successors to the subsystem only and (ii) the synthesis of a local controller for a subsystem requires information only from predecessors of the subsystem and it can be performed using only local computational resources. Our method hinges on local tube MPC controllers based on robust control invariant sets and it advances the PnP design procedure proposed in Riverso et al., 2012 in several directions. Quite notably, using recent results in the computation of robust control invariant sets, we show how critical steps in the design of a local controller can be solved through linear programming. Finally, an application of the proposed control design procedure to frequency control in power networks is presented

Learning an Approximate Model Predictive Controller with Guarantees

A supervised learning framework is proposed to approximate a model predictive controller (MPC) with reduced computational complexity and guarantees on stability and constraint satisfaction. The framework can be used for a wide class of nonlinear systems. Any standard supervised learning technique (e.g. neural networks) can be employed to approximate the MPC from samples. In order to obtain closed-loop guarantees for the learned MPC, a robust MPC design is combined with statistical learning bounds. The MPC design ensures robustness to inaccurate inputs within given bounds, and Hoeffding's Inequality is used to validate that the learned MPC satisfies these bounds with high confidence. The result is a closed-loop statistical guarantee on stability and constraint satisfaction for the learned MPC. The proposed learning-based MPC framework is illustrated on a nonlinear benchmark problem, for which we learn a neural network controller with guarantees.Comment: 6 pages, 3 figures, to appear in IEEE Control Systems Letter