8,209 research outputs found
Development of an intelligent object for grasp and manipulation research
Kõiva R, Haschke R, Ritter H. Development of an intelligent object for grasp and manipulation research. Presented at the ICAR 2011, Tallinn, Estonia.In this paper we introduce a novel device, called iObject, which is equipped with tactile and motion tracking sensors that allow for the evaluation of human and robot grasping and manipulation actions. Contact location and contact force, object acceleration in space (6D) and orientation relative to the earth (3D magnetometer) are measured and transmitted wirelessly over a Bluetooth connection. By allowing human-human, human-robot and robot-robot comparisons to be made, iObject is a versatile tool for studying manual interaction.
To demonstrate the efficiency and flexibility of iObject for the study of bimanual interactions, we report on a physiological experiment and evaluate the main parameters of the considered dual-handed manipulation task
Multiple-sensor integration for efficient reverse engineering of geometry
This paper describes a multi-sensor measuring system for reverse engineering applications. A sphere-plate artefact is developed for data unification of the hybrid system. With the coordinate data acquired using the optical system, intelligent feature recognition and segmentation algorithms can be applied to extract the global surface information of the object. The coordinate measuring machine (CMM) is used to re-measure the geometric features with a small amount of sampling points and the obtained information can be subsequently used to compensate the point data patches which are measured by optical system. Then the optimized point data can be exploited for accurate reverse engineering of CAD model. The limitations of each measurement system are compensated by the other. Experimental results validate the accuracy and effectiveness of this data optimization approach
Review of the mathematical foundations of data fusion techniques in surface metrology
The recent proliferation of engineered surfaces, including freeform and structured surfaces, is challenging current metrology techniques. Measurement using multiple sensors has been proposed to achieve enhanced benefits, mainly in terms of spatial frequency bandwidth, which a single sensor cannot provide. When using data from different sensors, a process of data fusion is required and there is much active research in this area. In this paper, current data fusion methods and applications are reviewed, with a focus on the mathematical foundations of the subject. Common research questions in the fusion of surface metrology data are raised and potential fusion algorithms are discussed
A Review of Smart Materials in Tactile Actuators for Information Delivery
As the largest organ in the human body, the skin provides the important
sensory channel for humans to receive external stimulations based on touch. By
the information perceived through touch, people can feel and guess the
properties of objects, like weight, temperature, textures, and motion, etc. In
fact, those properties are nerve stimuli to our brain received by different
kinds of receptors in the skin. Mechanical, electrical, and thermal stimuli can
stimulate these receptors and cause different information to be conveyed
through the nerves. Technologies for actuators to provide mechanical,
electrical or thermal stimuli have been developed. These include static or
vibrational actuation, electrostatic stimulation, focused ultrasound, and more.
Smart materials, such as piezoelectric materials, carbon nanotubes, and shape
memory alloys, play important roles in providing actuation for tactile
sensation. This paper aims to review the background biological knowledge of
human tactile sensing, to give an understanding of how we sense and interact
with the world through the sense of touch, as well as the conventional and
state-of-the-art technologies of tactile actuators for tactile feedback
delivery
The WCSAR telerobotics test bed
Component technologies for use in telerobotic systems for space are being developed. As part of this effort, a test bed was established in which these technologies can be verified and integrated into telerobotic systems. The facility consists of two slave industrial robots, an articulated master arm controller, a cartesian coordinate master arm controller, and a variety of sensors, displays and stimulators for feedback to human operators. The controller of one of the slave robots remains in its commercial state, while the controller of the other robot has been replaced with a new controller that achieves high-performance in telerobotic operating modes. A dexterous slave hand which consists of two fingers and a thumb is being developed, along with a number of force-reflecting and non-force reflecting master hands, wrists and arms. A tactile sensing finger tip based on piezo-film technology has been developed, along with tactile stimulators and CAD-based displays for sensory feedback and sensory substitution. The telerobotics test bed and its component technologies are described, as well as the integration of these component technologies into telerobotic systems, and their performance in conjunction with human operators
Printable stretchable interconnects
This article presents recent progress and a comprehensive overview of stretchable interconnects based on printable nanocomposites. Nanocomposite-based inks for printed stretchable interconnects have been categorized according to dispersed filler materials. They comprise of carbon-based fillers and metal-based fillers. Benefits in terms of excellent electrical performance and elastic properties make nanocomposites the ideal candidates for stretchable interconnect applications. Deeper analysis of nanocomposites-based stretchable interconnects includes the correlation between the size of fillers, percolation ratio, maximum electrical conductivity and mechanical elasticity. The key trends in the field have been highlighted using curve fitting methods on large data collected from the literature. Furthermore, a wide variety of applications for stretchable interconnects are presented
PetroSurf3D - A Dataset for high-resolution 3D Surface Segmentation
The development of powerful 3D scanning hardware and reconstruction
algorithms has strongly promoted the generation of 3D surface reconstructions
in different domains. An area of special interest for such 3D reconstructions
is the cultural heritage domain, where surface reconstructions are generated to
digitally preserve historical artifacts. While reconstruction quality nowadays
is sufficient in many cases, the robust analysis (e.g. segmentation, matching,
and classification) of reconstructed 3D data is still an open topic. In this
paper, we target the automatic and interactive segmentation of high-resolution
3D surface reconstructions from the archaeological domain. To foster research
in this field, we introduce a fully annotated and publicly available
large-scale 3D surface dataset including high-resolution meshes, depth maps and
point clouds as a novel benchmark dataset to the community. We provide baseline
results for our existing random forest-based approach and for the first time
investigate segmentation with convolutional neural networks (CNNs) on the data.
Results show that both approaches have complementary strengths and weaknesses
and that the provided dataset represents a challenge for future research.Comment: CBMI Submission; Dataset and more information can be found at
http://lrs.icg.tugraz.at/research/petroglyphsegmentation
- …