Highly Reliable Quadruple-Node Upset-Tolerant D-Latch

This work was supported in part by the Spanish MCIN/AEI /10.13039/501100011033/ FEDER under Grant PID2020-117344RB-I00, and in part by the Regional Government under Grant P20_00265 and Grant P20_00633.As CMOS technology scaling pushes towards the reduction of the length of transistors, electronic circuits face numerous reliability issues, and in particular nodes of D-latches at nano-scale confront multiple-node upset errors due to their operation in harsh radiative environments. In this manuscript, a new high reliable D-latch which can tolerate quadruple-node upsets is presented. The design is based on a low-cost single event double-upset tolerant (LSEDUT) cell and a clock-gating triple-level soft-error interceptive module (CG-SIM). Due to its LSEDUT base, it can tolerate two upsets, but the combination of two LSEDUTs and the triple-level CG-SIM provides the proposed D-latch with remarkable quadruple-node upsets (QNU) tolerance. Applying LSEDUTs for designing a QNU-tolerant D-latch improves considerably its features; in particular, this approach enhances its reliability against process variations, such as threshold voltage and (W/L) transistor variability, compared to previous QNU-tolerant D-latches and double-node-upset tolerant latches. Furthermore, the proposed D-latch not only tolerates QNUs, but it also features a clear advantage in comparison with the previous clock gating-based quadruple-node-upset-tolerant (QNUTL-CG) D-latch: it can mask single event transients. Speci c gures of merit endorse the gains introduced by the new design: compared with the QNUTL-CG D-latch, the improvements of the maximum standard deviations of the gate delay, induced by threshold voltage and (W/L) transistors variability of the proposed D-latch, are 13.8% and 5.7%, respectively. Also, the proposed D-latch has 23% lesser maximum standard deviation in power consumption, resulting from threshold voltage variability, when compared to the QNUTL-CG D-latch.Spanish MCIN/AEI /10.13039/501100011033/ FEDER under Grant PID2020-117344RB-I00Regional Government under Grant P20_00265 and Grant P20_0063

A low power and soft error resilience guard-gated Quartro-based flip-flop in 45 nm CMOS technology

Abstract Conventional flip‐flops are more vulnerable to particle strikes in a radiation environment. To overcome this disadvantage, in the literature, many radiation‐hardened flip‐flops (FFs) based on techniques like triple modular redundancy, dual interlocked cell, Quatro and guard‐gated Quatro cell, and so on, are discussed. The flip‐flop realized using radiation hardened by design Quatro cell is named as the improved version of Quatro flip‐flop (IVQFF). Single event upset (SEU) at inverter stages of master/slave and at output are the two drawbacks of IVQFF. This study proposes a guard‐gated Quatro FF (GQFF) using guard‐gated Quatro cell and Muller C‐element. To overcome the SEU at inverter stages of IVQFF, in GQFF, the inverter stages are realized in a parallel fashion. A dual‐input Muller C‐element is connected to the GQFF output stage to mask the SEU and thus maintain the correct output. The proposed GQFF tolerates both single node upset (SNU) and double node upset (DNU). It also achieves low power. To prove the efficacy, GQFF and the existing FFs are implemented in 45 nm Complementary Metal Oxide Semiconductor (CMOS) technology. From the simulation results, it may be noted that the GQFF is 100% immune to SNUs and 50% immune to DNUs

Radiation Tolerant Electronics, Volume II

Research on radiation tolerant electronics has increased rapidly over the last few years, resulting in many interesting approaches to model radiation effects and design radiation hardened integrated circuits and embedded systems. This research is strongly driven by the growing need for radiation hardened electronics for space applications, high-energy physics experiments such as those on the large hadron collider at CERN, and many terrestrial nuclear applications, including nuclear energy and safety management. With the progressive scaling of integrated circuit technologies and the growing complexity of electronic systems, their ionizing radiation susceptibility has raised many exciting challenges, which are expected to drive research in the coming decade.After the success of the first Special Issue on Radiation Tolerant Electronics, the current Special Issue features thirteen articles highlighting recent breakthroughs in radiation tolerant integrated circuit design, fault tolerance in FPGAs, radiation effects in semiconductor materials and advanced IC technologies and modelling of radiation effects

Study of Layout Techniques in Dynamic Logic Circuitry for Single Event Effect Mitigation

Dynamic logic circuits are highly suitable for high-speed applications, considering the fact that they have a smaller area and faster transition. However, their application in space or other radiation-rich environments has been significantly inhibited by their susceptibility to radiation effects. This work begins with the basic operations of dynamic logic circuits, elaborates upon the physics underlying their radiation vulnerability, and evaluates three techniques that harden dynamic logic from the layout: drain extension, pulse quenching, and a proposed method. The drain extension method adds an extra drain to the sensitive node in order to improve charge sharing, the pulse quenching scheme utilizes charge sharing by duplicating a component that offsets the transient pulse, and the proposed technique takes advantage of both. Domino buffers designed using these three techniques, along with a conventional design as reference, were modeled and simulated using a 3D TCAD tool. Simulation results confirm a significant reduction of soft error rate in the proposed technique and suggest a greater reduction with angled incidence. A 130 nm chip containing designed buffer and register chains was fabricated and tested with heavy ion irradiation. According to the experiment results, the proposed design achieved 30% soft error rate reduction, with 19%, 20%, and 10% overhead in speed, power, and area, respectively

Radiation Hardened by Design Methodologies for Soft-Error Mitigated Digital Architectures

abstract: Digital architectures for data encryption, processing, clock synthesis, data transfer, etc. are susceptible to radiation induced soft errors due to charge collection in complementary metal oxide semiconductor (CMOS) integrated circuits (ICs). Radiation hardening by design (RHBD) techniques such as double modular redundancy (DMR) and triple modular redundancy (TMR) are used for error detection and correction respectively in such architectures. Multiple node charge collection (MNCC) causes domain crossing errors (DCE) which can render the redundancy ineffectual. This dissertation describes techniques to ensure DCE mitigation with statistical confidence for various designs. Both sequential and combinatorial logic are separated using these custom and computer aided design (CAD) methodologies. Radiation vulnerability and design overhead are studied on VLSI sub-systems including an advanced encryption standard (AES) which is DCE mitigated using module level coarse separation on a 90-nm process with 99.999% DCE mitigation. A radiation hardened microprocessor (HERMES2) is implemented in both 90-nm and 55-nm technologies with an interleaved separation methodology with 99.99% DCE mitigation while achieving 4.9% increased cell density, 28.5 % reduced routing and 5.6% reduced power dissipation over the module fences implementation. A DMR register-file (RF) is implemented in 55 nm process and used in the HERMES2 microprocessor. The RF array custom design and the decoders APR designed are explored with a focus on design cycle time. Quality of results (QOR) is studied from power, performance, area and reliability (PPAR) perspective to ascertain the improvement over other design techniques. A radiation hardened all-digital multiplying pulsed digital delay line (DDL) is designed for double data rate (DDR2/3) applications for data eye centering during high speed off-chip data transfer. The effect of noise, radiation particle strikes and statistical variation on the designed DDL are studied in detail. The design achieves the best in class 22.4 ps peak-to-peak jitter, 100-850 MHz range at 14 pJ/cycle energy consumption. Vulnerability of the non-hardened design is characterized and portions of the redundant DDL are separated in custom and auto-place and route (APR). Thus, a range of designs for mission critical applications are implemented using methodologies proposed in this work and their potential PPAR benefits explored in detail.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Cost-Efficient Soft-Error Resiliency for ASIP-based Embedded Systems

Recent decades have witnessed the rapid growth of embedded systems. At present, embedded systems are widely applied in a broad range of critical applications including automotive electronics, telecommunication, healthcare, industrial electronics, consumer electronics military and aerospace. Human society will continue to be greatly transformed by the pervasive deployment of embedded systems. Consequently, substantial amount of efforts from both industry and academic communities have contributed to the research and development of embedded systems. Application-specific instruction-set processor (ASIP) is one of the key advances in embedded processor technology, and a crucial component in some embedded systems. Soft errors have been directly observed since the 1970s. As devices scale, the exponential increase in the integration of computing systems occurs, which leads to correspondingly decrease in the reliability of computing systems. Today, major research forums state that soft errors are one of the major design technology challenges at and beyond the 22 nm technology node. Therefore, a large number of soft-error solutions, including error detection and recovery, have been proposed from differing perspectives. Nonetheless, most of the existing solutions are designed for general or high-performance systems which are different to embedded systems. For embedded systems, the soft-error solutions must be cost-efficient, which requires the tailoring of the processor architecture with respect to the feature of the target application. This thesis embodies a series of explorations for cost-efficient soft-error solutions for ASIP-based embedded systems. In this exploration, five major solutions are proposed. The first proposed solution realizes checkpoint recovery in ASIPs. By generating customized instructions, ASIP-implemented checkpoint recovery can perform at a finer granularity than what was previously possible. The fault-free performance overhead of this solution is only 1.45% on average. The recovery delay is only 62 cycles at the worst case. The area and leakage power overheads are 44.4% and 45.6% on average. The second solution explores utilizing two primitive error recovery techniques jointly. This solution includes three application-specific optimization methodologies. This solution generates the optimized error-resilient ASIPs, based on the characteristics of primitive error recovery techniques, static reliability analysis and design constraints. The resultant ASIP can be configured to perform at runtime according to the optimized recovery scheme. This solution can strategically enhance cost-efficiency for error recovery. In order to guarantee cost-efficiency in unpredictable runtime situations, the third solution explores runtime adaptation for error recovery. This solution aims to budget and adapt the error recovery operations, so as to spend the resources intelligently and to tolerate adverse influences of runtime variations. The resultant ASIP can make runtime decisions to determine the activation of spatial and temporal redundancies, according to the runtime situations. At the best case, this solution can achieve almost 50x reliability gain over the state of the art solutions. Given the increasing demand for multi-core computing systems, the last two proposed solutions target error recovery in multi-core ASIPs. The first solution of these two explores ASIP-implemented fine-grained process migration. This solution is a key infrastructure, which allows cost-efficient task management, for realizing cost-efficient soft-error recovery in multi-core ASIPs. The average time cost is only 289 machine cycles to perform process migration. The last solution explores using dynamic and adaptive mapping to assign heterogeneous recovery operations to the tasks in the multi-core context. This solution allows each individual ASIP-based processing core to dynamically adapt its specific error recovery functionality according to the corresponding task's characteristics, in terms of soft error vulnerability and execution time deadline. This solution can significantly improve the reliability of the system by almost two times, with graceful constraint penalty, in comparison to the state-of-the-art counterparts

Cross layer reliability estimation for digital systems

Forthcoming manufacturing technologies hold the promise to increase multifuctional computing systems performance and functionality thanks to a remarkable growth of the device integration density. Despite the benefits introduced by this technology improvements, reliability is becoming a key challenge for the semiconductor industry. With transistor size reaching the atomic dimensions, vulnerability to unavoidable fluctuations in the manufacturing process and environmental stress rise dramatically. Failing to meet a reliability requirement may add excessive re-design cost to recover and may have severe consequences on the success of a product. %Worst-case design with large margins to guarantee reliable operation has been employed for long time. However, it is reaching a limit that makes it economically unsustainable due to its performance, area, and power cost. One of the open challenges for future technologies is building ``dependable'' systems on top of unreliable components, which will degrade and even fail during normal lifetime of the chip. Conventional design techniques are highly inefficient. They expend significant amount of energy to tolerate the device unpredictability by adding safety margins to a circuit's operating voltage, clock frequency or charge stored per bit. Unfortunately, the additional cost introduced to compensate unreliability are rapidly becoming unacceptable in today's environment where power consumption is often the limiting factor for integrated circuit performance, and energy efficiency is a top concern. Attention should be payed to tailor techniques to improve the reliability of a system on the basis of its requirements, ending up with cost-effective solutions favoring the success of the product on the market. Cross-layer reliability is one of the most promising approaches to achieve this goal. Cross-layer reliability techniques take into account the interactions between the layers composing a complex system (i.e., technology, hardware and software layers) to implement efficient cross-layer fault mitigation mechanisms. Fault tolerance mechanism are carefully implemented at different layers starting from the technology up to the software layer to carefully optimize the system by exploiting the inner capability of each layer to mask lower level faults. For this purpose, cross-layer reliability design techniques need to be complemented with cross-layer reliability evaluation tools, able to precisely assess the reliability level of a selected design early in the design cycle. Accurate and early reliability estimates would enable the exploration of the system design space and the optimization of multiple constraints such as performance, power consumption, cost and reliability. This Ph.D. thesis is devoted to the development of new methodologies and tools to evaluate and optimize the reliability of complex digital systems during the early design stages. More specifically, techniques addressing hardware accelerators (i.e., FPGAs and GPUs), microprocessors and full systems are discussed. All developed methodologies are presented in conjunction with their application to real-world use cases belonging to different computational domains

Dependable Embedded Systems

This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems

Safety and Reliability - Safe Societies in a Changing World

The contributions cover a wide range of methodologies and application areas for safety and reliability that contribute to safe societies in a changing world. These methodologies and applications include: - foundations of risk and reliability assessment and management - mathematical methods in reliability and safety - risk assessment - risk management - system reliability - uncertainty analysis - digitalization and big data - prognostics and system health management - occupational safety - accident and incident modeling - maintenance modeling and applications - simulation for safety and reliability analysis - dynamic risk and barrier management - organizational factors and safety culture - human factors and human reliability - resilience engineering - structural reliability - natural hazards - security - economic analysis in risk managemen